Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Before Using
•
Important Safeguards
Connections / Initial Setup (Ready to Play)
Playback / Record on a Tape
•
Connections
Timer Recording
Location of Controls
•
T
Important Safeguards and Precautions
imer Recording
Congratulations
Make all cable or antenna connections before plugging into an AC outlet.
Head Cleaning
Playback a Tape
Record on a Tape
Timer Recording
Remote Control Buttons
Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set.
TO REDUCE THE RISK OF ELECTRIC SHOCK, FIRE, INJURY TO PERSONS OR DAMAGE TO
on your new purchase! With proper use, this
THIS PRODUCT, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL
dependable product will provide years of
Old or damaged tapes may clog heads.
1 Insert a tape.
1 Insert a tape with a record tab (p. 3).
1 Press PROG* to display program screen.
WARNINGS IN THE MANUAL AND ON THE PRODUCT.
enjoyment. Please fill in the information below.
Connecting (Select a method)
Video Head Clog Sensor
EJECT
VCR (mode)
• Loose or peeling labels
• VCR power comes on.
Example
(Serial number is on tag on back of VCR.)
(Ejects tape)
(Enables VCR functions)
INSTALLATION
OUTDOOR ANTENNA INSTALLATION
Screen-right appears during
may cause tape jam.
If Auto VCR/TV (see p. 10 of Advanced
•
V I DEO HEADS MAY
2 P DT START STOP CH SPD 1) Press .
1 -- --:-- --:-- -- --
1 POWER SOURCE CAUTION
1
SAFE ANTENNA AND CABLE CONNECTION
play if clogging is detected.
Initial
NEED CLEAN I NG
For ANT./Cable
Operations book) is set to “OFF,” press
POWER
PLEASE I NSERT HEAD
➛ VCR ➛ TV
2 -- --:-- --:-- -- --
• VCR power comes on.
2) Set record DATE,
Today
If an outside antenna or cable system is connected to the
• Date of Purchase
3 -- --:-- --:-- -- --
TV (mode)
Operate only from a power source indicated on the unit
To remove screen, press PLAY.
CLEAN I NG CASSETTE
4 -- --:-- --:-- -- --
VCR/TV.
(Turns VCR off/on)
OR REFER TO MANUAL
If Auto VCR/TV (see p. 10 of
equipment, be sure the antenna or cable system is grounded
press
to select:
(Enables TV functions)
or in this manual. If necessary, have your Electric Utility
• Dealer Purchased From
1 Connect cable from
so as to provide some protection against built up static
• Use “dry” type head
Advanced Operations book) is set to
Service Company or Video Products Dealer verify the
VCR/TV
END : PLAY
1~31= one time,
charges and voltage surges.
1
NEC - NATIONAL
•
SELECT : SET :
ELECTRICAL CODE
• Dealer Address
power source in your home.
(For TV or VCR mode)
ANTENNA
cleaning cassette only.
Antenna/Cable to VCR’s IN
“OFF,” press VCR/TV.
Location of Contr
END
: PROG
Section 810 of the National
LEAD IN
WIRE
2 Press CH
or NUMBER keys
or DAILY= Monday~Friday,
COUNTER RESET
2 POLARIZED OR GROUNDING PLUG
GROUND
Setup
Electrical Code, ANSI/NFPA 70 (in
CLAMP
• Dealer Phone No.
(Part No. NV-TCL30PT is recommended.)
FROM ANT. jack.
to select the channel.
or WEEKLY= same time
NUMBER Keys
(Resets counter to zero)
As a safety feature, this Video product comes with
Canada, part 1 of the Canadian
ANTENNA
DISCHARGE UNIT
• Follow cleaning tape instructions carefully.
•
either a polarized power cord plug (one blade is wider
Electrical Code) provides information
(NEC SECTION 810-20)
ELECTRIC
SERVICE
• Model No. PV-V4525S
Accessor
2 Press PLAY to play tape.
• If channel number is over 100, first press 100
each week (see right).
(Selects channel directly)
GROUNDING CONDUCTORS
EQUIPMENT
(NEC SECTION 810-21)
Excessive use of tape can shorten head life.
than the other), or a three-wire grounding type plug.
with respect to proper grounding of
GROUND CLAMPS
• If tape has no rec. tab (p. 3), auto play begins.
key then the other 2 digits.
TAPE POSITION/STATUS
• Serial No.
2 Connect VCR’s OUT TO TV
the mast and supporting structure,
2
POWER SERVICE GROUNDING
• If head clog symptoms persist, contact your
3) Set remaining items,
INPUT
POLARIZED PLUG CAUTION:
ELECTRODE SYSTEM
(NEC ART 250, PART H)
• For “LINE” input, see p. 9 of “Advanced
(Locates tape position/tape status)
•
(For LINE or channel)
grounding of the lead-in wire to an antenna
nearest servicenter by visiting our Web Site
This plug will only fit into an outlet one way. If you cannot
jack to TV’s ANT. IN jack
Special Features During Play
Clock Set
press to set START/ STOP times, CH (channel) or
Operations” book.
discharge unit, size of grounding conductors, location of
ADD/DELETE
DISPLAY
fully insert the plug, try reversing it. If it still will not fit,
antenna discharge unit, connection to grounding electrodes
Accessories
(p. 12).
LINE input (p. 9 of Advanced Operations book), and
with included RF Cable.
(Adds or deletes a channel)
(Displays VCR status)
have an electrician install the proper wall outlet. Do not
Forward/Reverse Scene Search
and requirements for the grounding electrode.
tape speed (p. 3).
ies
defeat the safety feature by tampering with the plug.
2
KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR CIRCUITS
Remote Control
➛ Press FF or REW.
3 Press SPEED to set record speed (p. 3).
PAUSE/SLOW
Batteries 2 “AA”
Then press
to select.
PLAY (Plays a tape)/
GROUNDING PLUG CAUTION:
An outside antenna system should be located well away from
(Displays still, frame by frame,
EUR7723KA0
➛ Press PLAY to release.
• SP = Standard Play
power lines, electric light or power circuits and where it will never
This plug will only fit into a three-hole grounding outlet.
Cleaning the VCR
•
For DSS/Cable Box ➛ VCR ➛ TV
FAST FORWARD/SEARCH
come into contact with these power sources if it should happen
Head Cleaning
After search has begun, each additional
• SLP = Super Long Play
Press PROG to end programming.
or slow motion picture)
(Fast forwards tape/forward
If necessary, have an electrician install the proper outlet.
to fall. When installing an outside antenna, extreme care should
Use soft, dry cloth or dusting attachment of a
press of FF or REW changes speed as
Do not defeat the safety feature by tampering with the plug.
1 Connect your cable box’s OUT
ACTION
•
visual search)
be taken to avoid touching power lines, circuits or other power
Select
ols (Remote Contr
(Displays menu)
vacuum to remove dust from all cabinet vent
shown below.
3 POWER CORD
sources as this could be fatal. Because of the hazards involved,
jack to the VCR’s IN FROM
4 Press REC to start recording.
3 P DT START STOP CH SPD To Enter More Programs
REWIND/SEARCH
1 13 2:00p 3:20p 02 SLP
2 -- --:-- --:-- -- --
Make sure power cords are routed so that they are not
antenna installation should be left to a professional.
holes. You may moisten cloth with non-abrasive,
[SP] : Approx. 9X ↔ Approx. 13X
Press
to select and press to set an unused program.
(Rewinds tape/reverse visual
3 -- --:-- --:-- -- --
RF Coaxial Cable
• To edit, press PAUSE/SLOW to pause, and
4 -- --:-- --:-- -- --
likely to have anything rest on them, roll over them, or
USING THE VIDEO UNIT
antistatic cleaner/ polisher.
ANT. jack with an RF cable.
[SLP] : Approx. 27X
Then repeat step 2. Or, press PROG to exit.
search)
↔ Approx. 43X
again to resume recording.
SET COMPLETED
be in the way of walking traffic. If an extension cord is
LSJA0418
If the unit has been in storage or moved to a new location, refer
Caution:
PROGRAM
STOP (Stops tape)
CANCEL : ADD/DLT
used, make sure it also has either a polarized or
1
first to the INSTALLATION section of these safeguards.
Channel
SELECT : SET :
Alcohol and various solvents could damage finish.
(Displays Timer Program screen)
Notes
END
: PROG
grounded plug and that the cords can be securely
1
KEEP THIS VIDEO UNIT AWAY FROM WATER OR
2 Connect VCR’s OUT TO TV
connected. Frayed cords, damaged plugs, and damaged
MOISTURE OF ANY KIND.
2
5
Remote keys
Press STOP to stop recording.
• Picture interruption may occur with some TVs.
or cracked wire insulation are hazardous and should be
2
IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
jack to TV’s ANT. IN jack
SAP/Hi-Fi
PLAY, STOP, REW, and FF
• FF and REW search speed may vary depending
(Selects audio mode for play
function as
replaced by a qualified service technician.
STRONG IMPACT, unplug the unit and have it inspected by
•
4 Press POWER off to set the timer recording. (“TIMER” lights on Multi Function Display.)
Overloaded outlets and extension cords are fire hazards
a qualified service technician before use.
Specifications
with included RF Cable.
on current tape position.
Loading Batteries
One Touch Recording
or record)
operation keys when menus
3
DURING AN ELECTRICAL STORM
• After 10 minutes in search mode, VCR returns to
and should be avoided.
(recording in progress)
VOLUME +/-
are displayed.
•
During a lightning storm, whether indoors or outdoors, or
Power Source:
120 V AC, 60 Hz
Play mode to protect the tape and the video
4 DO NOT BLOCK VENTILATION HOLES
Press REC repeatedly to set length as follows:
Playback
(Adjusts TV volume)
before leaving the unit unused for extended periods of time,
Ventilation openings in the cabinet release heat
Power Consumption: Power On
Over tightening “Nut type” RF coaxial cables
heads.
ol Buttons,
disconnect all equipment from the power source as well as
30 min. ➛ 1 hr. ➛ 1:30 ➛ 2:00 ➛ 3:00
RECORD
CHANNEL /
generated during operation. If they are blocked, heat
Approx. 14 W
may damage jacks. Finger tighten only.
the antenna and cable system.
Still (Freeze) Picture
➛ 4:00 ➛ exit.
Review, Replace, or Clear Program
Cancel a Timer Recording
(Records a program, etc.)
TRACKING/ V-LOCK
build-up inside the unit can cause failures that may
4
WHEN THE UNIT IS PLUGGED IN
Power Off
The VCR shuts off at the length set.
(Selects channel/reduces
result in a fire hazard or heat damage to cassettes.
• Never expose the unit to rain or water. DO NOT OPERATE
Approx. 0.9 W
Initial Setup (Ready to Play)
➛ Press PAUSE/SLOW.
To order accessories, call toll free
(Recording is not in progress)
(Recording is in progress)
SPEED
For protection, follow these rules:
if liquid has been spilled into the unit. Immediately unplug
Video Signal:
EIA Standard NTSC color
➛
picture noise during Play
Press PLAY to release.
Record one station, watch another
(Changes tape speed)
and Slow mode)
a. Never cover ventilation slots or the unit while in use,
the unit, and have it inspected by a service technician.
1-800-332-5368.
or operate the unit when placed on a bed, sofa, rug,
Fire and shock hazards can result from electrical shorts
Video Recording
4 rotary heads helical
1 Turn TV on and tune to channel 3.
3 Settings are made automatically.
Press VCR/TV
•
a Press PROG
Press POWER and then STOP within 10
Slow Motion Picture
COMMERCIAL SKIP/
caused by liquid contact inside.
Record
or other soft surface.
System:
scanning system
When complete, this screen appears.
➛ select channels on TV (recording continues).
to display program screen.
seconds to cancel the Timer Recording.
b. Avoid built-in installation, such as a book case or
• Never drop or push any object through openings in the
Loading the Batteries
unit. Some internal parts carry hazardous voltages and
Audio Track:
1 track (Normal)
2
ZERO SEARCH
SEARCH/ ENTER
Plug VCR Power Cord into AC wall outlet.
➛ Hold down PAUSE/SLOW in Still mode.
(Starts COMMERCIAL SKIP/
(Set search system/
Fr
rack, unless proper ventilation is provided.
contact can cause electric shock or fire hazard.
2 channel (Hi-Fi Audio Sound)
VCR comes on and auto channel and clock
➛ Press PLAY to release.
Select channels on VCR
P DT START STOP CH SPD
Press
to select
5 AVOID EXTREMELY HOT LOCATIONS OR SUDDEN
•
b
(The TIMER indicator goes out on Multi Function
Zero Search)
Tunes TV channel)
ont
• Avoid placing the unit directly above or below your TV set
1) Open cover.
Tuner
Pr
1 13 2:00p 3:20p 02 SLP
set starts.
Press VCR/TV in Stop or Pause mode.
2 14 7:00p 7:30p 10 SP
desired program.
Display.)
TEMPERATURE CHANGES
as this may cause electrical interference.
Notes
Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69
➛
3 -- --:-- --:-- -- --
select channels on VCR.
4 -- --:-- --:-- -- --
Do not place the unit over or near any kind of heater or
Keep all magnets away from electronic equipment.
• If screen below does not appear...
e
• These features work best in SP or SLP mode.
•
V
radiator, in direct sunlight, inside a closed vehicle, etc..
5
USING ACCESSORIES
CABLE Channels:
Midband A ~ I (14 ~ 22)
v
A
check all connections.
CANCEL : ADD/DLT
Remote Control
Do not move the unit suddenly between areas of
Use only accessories recommended by the manufacturer to
Superband J ~ W (23 ~ 36)
ent
• The sound will be muted.
i
SELECT : SET :
ew of the
extreme temperature variation. If the unit is suddenly
avoid risk of fire, shock, or other hazards.
Try tuning TV to channel 4.
Notes
uto Operation
END
: PROG
EJECT button: Press to eject tape. EJECT is not available during recording.
Hyperband AA ~ EEE
• To reduce picture noise, see “Manual
moved from a cold place to a warm place, moisture may
6
CLEANING THE UNIT
(37 ~ 64)
• To change VCR’s output channel,
• Watching one channel and recording
Unplug the unit. Then, use a clean, dry, chemically untreated cloth
2) Insert batteries
T
Tracking Control” on p. 3.
condense in the unit and on the tape.
another is not possible when using Cable
c To Replace program...
to gently remove dust or debris. DO NOT USE cleaning fluids,
Lowband A-5 ~ A-1 (95 ~ 99)
a
6 TO AVOID PERSONAL INJURY
as marked.
see “VCR’s Output Channel” (p. 12)
If “AUTO CLOCK SET IS INCOMPLETE”
• After 3 minutes in Still or Slow mode, VCR
Box or DSS Receiver.
P DT START STOP CH SPD
aerosols, or forced air that could over-spray, or seep into the unit
pe Erasur
1) Press to display.
Special CABLE channel 5A (01)
1 13 2:00p 3:20p 02 SLP
• Do not place unsecured equipment on a
in Advanced Operations book.
stops to protect the tape and the video heads.
and cause electrical shock. Any substance such as wax,
appears, manually set clock (below).
2 14 7:00p 7:30p 10 SP
• After 5 minutes in Pause mode, VCR stops to
Ultraband 65 ~ 94, 100 ~ 125
3 -- --:-- --:-- -- --
sloping surface.
adhesive tape, etc. may mar the cabinet surface. Exposure to
2) Repeat Step 2
protect the tape and the video heads.
4 -- --:-- --:-- -- --
• Do not place this unit on any support
Operating
greasy, humid, or dusty areas may adversely affect internal parts.
Plug VCR Power plug into an AC wall outlet.
(above) to set new
VCR)
that is not firm, level, and adequately
Temperature:
5 °C ~ 40 °C (41 °F ~ 104 °F)
SERVICE
3 Press STOP to stop tape.
SELECT : SET :
programs.
strong. The unit could fall causing
AUTO CLOCK SET
Operating Humidity: 10 % ~ 75 %
EXIT
: PROG
serious injury to a child or adult and
1
DO NOT SERVICE THIS PRODUCT YOURSELF
If, after carefully following the detailed operating
Weight:
2.56 kg (5.6 lbs.)
IS I NCOMPLETE
damage to the unit.
Front View of the VCR
instructions, this Video product does not operate properly,
e
Rapid Rewind/FF
or
• An appliance and cart combination should be moved
3) Close cover.
Dimensions:
360 (W) x 89 (H) x 226 (D) mm
do not attempt to open or remove covers, or make any
•
with care. Quick stops, excessive force, and uneven
adjustments not described in the manual. Unplug the unit
14-3/16” (W) x 3-1/2” (H) x
Specif
PLEASE SET CLOCK BY
Press REW or FF in Stop mode to
To Clear program...
PRESSING ACT I ON KEY
surfaces may cause the appliance and cart
and contact a qualified service technician.
Battery replacement caution
8-7/8” (D) inch
CH AUTO SET PROCEEDING
rewind or fast forward tape.
P DT START STOP CH SPD
combination to overturn.
2
IF REPLACEMENT PARTS ARE REQUIRED
Press ADD/DLT.
• Do not mix old and new batteries.
Note: Designs and specifications are subject to
• Rewinds a T-120 tape in approx. 1 minute.
This video recorder, equipped with HQ
1 -- --:-- --:-- -- --
Cassette Compartment
• Carefully follow all operating instructions and use the
Make sure the service technician uses only parts specified by
2 14 7:00p 7:30p 10 SP
• Do not mix alkaline with manganese batteries.
3 -- --:-- --:-- -- --
manufacturer's recommended accessories when
the manufacturer, or those having the same safety
change without notice.
(High Quality) system, is compatible with
4 -- --:-- --:-- -- --
characteristics as the original parts. The use of unauthorized
ications
CANCEL : STOP
operating this unit or connecting it to any other
Press EJECT on remote,
existing VHS equipment. Only use tapes
Remote
STOP/EJECT
substitutes may result in fire, electric shock, or other hazards.
equipment.
Manual Clock Set
or STOP/EJECT on VCR to eject tape.
SELECT : SET :
3
HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY CHECK
Prevent Accidental Tape Erasure
with the
mark. Only tapes tested and
Sensor
END
: PROG
After any service or repairs to the unit, request the service
Features for a Quality Picture
If Auto Clock Set was incomplete.
inspected for use in 2, 4, 6, and 8 hour
technician to conduct a thorough safety check as described
Break off the tab to
To record again.
in the manufacture’s service literature to ensure that the
machines are recommended.
video unit is in safe operating condition.
d Press PROG to end the programming.
prevent recording.
Digital Auto Picture
•
1 Press ACTION* on remote to display
POWER
Record/Playback
AUTO CLOCK SET
Automatically controls the video output signal for
CLOCK menu.
PROCEEDING
Safety Precautions/Mesures de sécurité
less noise depending on the tape condition.
Digital Auto Tracking
CANCEL : STOP
Continuously analyzes the signal and adjusts for
Video
FAST
Auto Operation Functions
To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
optimum picture quality.
Input
FORWARD/
If you use a cable box, turn it on and set it to
Notes
Cover the hole
Connector
Record Tab
Auto Play
SEARCH
Manual Tracking Control
the Public Broadcasting Station (PBS) channel
with cellophane
• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must be set to the
(to reduce picture noise)
Insert a tape
in your time zone. If you use a DSS receiver, it
➛ Power comes on ➛ Play starts if there is no record tab (see p. 3).
tape.
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Use during Playback and Slow Motion mode to
Cable Box output channel and your Cable Box must be manually set to the desired channel.
Audio Input
CHANNEL /
Screw driver
RECORD
REWIND/
must be turned off.
Auto Rewind
reduce picture noise.
The Cable Box must be left on.
Connector
TRACKING/ V-LOCK
SEARCH
AVERTISSEMENT : Afin de prévenir tout risque d’incendie ou de chocs électriques, ne
2 Press to select the month and to set.
Play
Press CH (TRACKING)
/ on the remote
T
• If a power interruption occurs while programming the timer, the timer program(s) may be canceled.
(L/R)
➛ Tape end ➛ Rewind ➛ Stop
pas exposer cet appareil à la pluie ou à une humidité excessive.
Record/Playback Time
In the same manner, select and set the
control or on the VCR until the picture clears up.
ime
Fast Forward
If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears on-screen,
date, year, time, and DST (Daylight Saving
Multi Function Display
PLAY
To return to Auto Tracking, press POWER off,
Notes
Play Auto Eject
please re-enter the timer programs.
ATTENTION : Pour éviter les chocs électriques, introduire la lame la plus large de la
Only use tapes with the
mark in this unit.
Time).
(Front Display)
then on again a few seconds later.
(Repeat Play must be off)
fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
• Function buttons are void during Initial Setup.
Play
Type of Video Cassette
• To eject a tape during Auto Set, press EJECT
➛ Tape end ➛ Rewind ➛ Stop➛ Tape ejects if there is no record tab.
Tape Speed
FCC WARNING : Any unauthorized changes or modifications to this
on remote or STOP twice on VCR.
Important notes when using DSS receiver
Setting
T120
T160
T180
equipment would void the user’s authority to operate.
Then make settings manually.
• When recording programs via DSS receiver, DSS receiver must be left on.
R
R
(See Advanced Operations book, p. 12.)
This symbol warns the user that uninsulated voltage within the unit may
SP
2 Hours
R
R
R
R
• When recording programs via an antenna or cable, DSS receiver must be turned off.
CAUTION
2 Hours
3 Hours
RISK OF ELECTRIC SHOCK
have sufficient magnitude to cause electric shock. Therefore, it is
(Standard Play)
40 Minutes
R
R
• If Auto Clock Set takes more than 30 minutes,
DO NOT OPEN
*Important: If a remote control button does not work when pressed,
*Important:
If a remote control button does not work when pressed,
dangerous to make any kind of contact with any inside part of this unit.
press STOP and perform settings manually.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
SLP
V-Lock Control (to reduce picture jitter)
(See Advanced Operations book, p. 12.)
press the VCR button on the remote and try the button again.
press the VCR button on the remote and try the button again.
This symbol alerts the user that important literature concerning the
DO NOT REMOVE COVER (OR BACK)
6 Hours
8 Hours
9 Hours
(Super Long Play)
NO USER-SERVICEABLE PARTS INSIDE
In Still mode, CH (TRACKING)
/ operate as a
operation and maintenance of this unit has been included. Therefore, it
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
should be read carefully in order to avoid any problems.
V-Lock control.
3 Press ACTION to start clock and exit.
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
PV-V4525S Basic-2 (041213).p65
3
2004/12/16, 10:51
LSQT0864A (Basic Operations) - Back (041216)
...