Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Sony Dateigröße: 754.9 kb Dateiname: Unterrichtssprache:

These signals ensure that your timer recordings are made regardless of broadcast delays, early starts, or broadcast interruptions. To use the PDC function, set V/P to ON in step 4 above. You can also use the PDC function for a source connected to one or more of the LINE inputs. To record satellite broadcasts If you connect the satellite tuner and the VCR, you can record satellite programmes. 1 Turn on the satellite tuner. 2 On the satellite tuner, select the satellite programme for which you want to make a timer setting. 3 Keep the satellite tuner turned on until the VCR finishes recording the satellite programme for which you have made a timer setting. Recording TV programmes using the VIDEO Plus+® system (not available on SLV-SE240G) To use the VCR after setting the timer To use the VCR before a recording begins, just press ?/1. The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 35). • Display tape information on the TV screen (page 38). • Check the timer settings (page 58). • Watch another TV programme (page 38). To use the Auto Tape Speed function In step 4 above, press m to select AUTO. When you are recording a programme in the SP mode and the remaining tape length becomes shorter than the recording time, the recording tape speed is automatically changed to the LP mode. Note that some noise will appear on the picture when the tape speed is changed. To operate this function correctly, the “TAPE SELECT” setting in the USER SET menu must be accurate (see page 66). Tips • To set the line input video source, you can also use the INPUT SELECT button. • You can set the extended time for the VIDEO Plus+ setting by 10, 20, 30, 40, 50, or 60 minutes. Set VIDEOPLUS EXTEND in the EASY OPERATION menu to the desired extended time on page 67. • To check, change, or cancel the programme setting, see “Checking/changing/ cancelling timer settings” on page 58. Notes • If the PDC signal is too weak or the broadcasting station failed to transmit PDC signals, the VCR will start recording at the set time without using the PDC function. • The and indicators flash in the display window when you press ?/1 with no tape inserted. • When you set TIMER METHOD to STANDARD in the EASY OPERATION menu, the VIDEOPLUS menu does not appear on the TV screen. Select VIDEOPLUS or VARIABLE. Basic Operations Recording TV programmes using the VIDEO Plus+® system (not available on SLV-SE240G) Setting the timer manually You can preset a total of eight programmes, including settings made with other timer methods. Before you start… • Check that the VCR clock is set to the correct time and date. • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a satellite or digital tuner, turn it on. • Turn on your TV and set it to the video channel. • Set TIMER METHOD to STANDARD or VARIABLE in the EASY OPERATION menu (see page 67). • Refer to “Index to parts and controls” for button locations. Press TIMER. TIMER 1 • When you set TIMER METHOD to VARIABLE: TIMER METHOD The TIMER METHOD menu STANDARD VIDEOPLUS appears on the TV screen. Press M/m to select STANDARD, then press OK. SELECT : SET : OK EXIT : MENU • When you set TIMER METHOD to STANDARD: PR DAY START STOP V/P –– –––– –– :–– –– :–– – – The TIMER PROGRAMMING –– –––– –– :–– –– :–– – – –– –––– –– :–– – :–– – – menu appears on the TV screen. –– –––– –– :–– – :–– – – –– –––– –– :–– – :–– – – –– –––– –– :–– – :–– – – –– –––– –– :–– – :–– – – –– –––– –– :–– – :–– – – SELECT END EXIT OK SET – – – – – – OK: : MENU: : Setting the timer manually OK OK Set the date, start and stop times, PR DAY START STOP V/P programme position, tape speed and 35 –––– –– :–– –– :–– – – PDC function: –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – 1 Press , to select each item in –– –––– –– :–– –– :–– – – –– –––– –– :–– –– :–– – – –– –––– –– :–– turn. –– :–– – – INPUT SELECT 2 Press M/m to set each item. –– –––– –– :–– –– :–– – – SELECT : SET : To correct a setting, press < to END : OK EXIT : MENU return to that setting and reset. • To record the same programme every day or the same day every week, see “Daily/weekly recording” on page 51. • To use the PDC function, set V/P to ON. For details about the PDC function, see “Timer recording with PDC signals” on page 48. • To record from other equipment connected to one or more of the LINE inputs, press INPUT SELECT to display the connected line in the “PR” position. Basic Operations Press MENU to exit the menu. MENU Press ?/1 to turn off the VCR. The indicator appears in the display window and the VCR stands by for recording. To record from other equipment, leave the connected equipment switched on. To stop recording To stop the VCR while recording, press x (stop). Daily/weekly recording In step 2 above, press m to select...

Herunterladen

Geben Sie zwei Ziffern: