Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Hersteller: Sony Dateigröße: 1021.64 kb Dateiname: Unterrichtssprache:

• If the AUDIO MONITOR button does not function, check that AUDIO MIX in the SET UP MENU is set to OFF. • (For SLV-EZ77NZ only) If HIFI AUDIO is set to STD, the standard sound will be recorded on both the hi-fi and normal audio tracks. Pressing AUDIO MONITOR will not change the sound. Additional Operations Searching the beginning of an Easy Timer recorded programme EASY TIMER If you record a programme using the Easy Timer function, you can easily find the beginning of the recording with this SEARCH function. The SEARCH indicator flashes when the VCR finishes knob the Easy Timer recording. SEARCH Press the EASY TIMER knob. The VCR turns on, rewinds to the beginning of the recorded programme and starts playback automatically. Tip • To stop the flashing of the SEARCH indicator, first turn the VCR on, then press the SEARCH button. (Do not press any button at this point, otherwise this SEARCH mode will be cancelled.) To start the SEARCH function, press the SEARCH button once. If you press the SEARCH button repeatedly, you can enter the index search mode (for details, see page 58). Notes • This SEARCH function will be cancelled (the SEARCH indicator turns off) if: – The VCR starts recording other programmes. – You press H PLAY, M # FF, m 3 REW or A EJECT button while the VCR is on. • With this SEARCH function, you can find the beginning of a programme recorded using the Easy Timer function only. Additional Operations ./> INDEX SEARCH Searching using the index function The VCR marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording. The VCR can search up to 99 index signals ahead of or behind the current position. You can either use the INDEX SEARCH buttons on the remote commander or the SEARCH button and EASY TIMER knob on the VCR. Using the INDEX SEARCH buttons on the remote commander 1 Insert an indexed tape into the VCR. 2 Press ./> INDEX SEARCH repeatedly to specify how many index signals ahead or behind you want to search: • To search ahead, press > INDEX INDEX 8 SEARCH SEARCH. • To search backwards, press .INDEX SEARCH. The VCR starts searching and the index number on the TV screen counts down to zero. The playback starts from the point about five seconds ahead of the specified index mark. continued Additional Operations Searching using the index function (continued) Using the SEARCH button EASY TIMER knob and EASY TIMER knob on the VCR SEARCH 1 Press SEARCH on the VCR repeatedly until “INDEX” appears in the display window (the SEARCH indicator lights up). SP APC 2 Turn the EASY TIMER knob to specify how many index signals ahead or behind you want to search: • To search ahead, turn the EASY TIMER knob clockwise. • To search backwards, turn the EASY TIMER knob counterclockwise. SP APC 3 Press the EASY TIMER knob. The VCR starts searching. The playback starts (the SEARCH indicator turns off) from the point about five seconds ahead of the specified index mark. To stop searching Press x STOP. Note • No index signal will be added when recording starts from recording pause. However, an index signal will be marked if you change the channel during recording pause. Additional Operations Adjusting the picture Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window, then goes off), distortion may occur if the tape was recorded in poor condition. If so, manually adjust the tracking. Press TRACKING +/– buttons on the VCR to display the tracking meter. The distortion should disappear as you press one of the two buttons. (The indicator lights up.) To resume automatic tracking adjustment, eject the tape and reinsert it. NORMAL TRACKING Tracking meter About the R2 (Reality Regenerator) function (SLV-EZ77AS/EZ77NZ only) The R2 function automatically adjusts the picture to the most suitable quality during playback. When playback starts, the R2 function activates and the R2 R2 button lights up. Each pressing of the button changes the effect and indication in the display window as follows: SOFTREAL (status of playback started) DYNA (dynamic) continued Additional Operations Adjusting the picture (continued) About the Adaptive Picture Control (APC) function The Adaptive Picture Control (APC) function e.g. SLV-EZ77NZ automatically improves recording and playback SET UP MENU quality by adjusting the VCR to the condition of AUDIO MIX ON • OFF the video heads and tape. To maintain better HIFI AUDIO APC •STD • ON NICAM OFF picture quality, we recommend that you set APC to ON in the SET UP MENU (with the APC indicator NTSC PB ON PAL • TV 4. 43 3. 58 in the display window lit). SELECT SET : [ : [ ] ] APC playback The APC function automatically works on all types of tapes, including rental tapes and tapes that were not recorded with APC. APC recording Whenever you insert a tape and first start recording, the VCR adjusts to the tape using the APC function (the APC indicator ...

Herunterladen

Geben Sie zwei Ziffern: