Stimmen - 3, Durchschnittliche Bewertung: 3.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Tragbare Kassettenspieler - SLV-SX740E (828.74 kb)
Tragbare Kassettenspieler - SLV-SX740E (829.92 kb)
Anleitung Zusammenfassung
Set the recording timer to record up to eight programmes, including settings made with other timer methods, that will be broadcast DIAL TIMER ?/1X within the next month. The recording start PROGRAM +/– x time and recording stop time can be set at one minute intervals. Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • To record from a decoder, turn it on. • Refer to “Index to parts and controls” for button locations. Basic Operations DIAL TIMER Press DIAL TIMER. “DATE” and “TODAY” appear alternately in the display window. If the date and time are not set, “DAY” will appear. See step 2 in the following section, “To set the clock” to set the date and time. DIAL TIMER Turn DIAL TIMER to set the recording date. continued Recording TV programmes using the Dial Timer (SLV-SE840D/E only) 3 3 DIAL TIMER Press DIAL TIMER. “START” and the current time appear alternately in the display window. 4 4 DIAL TIMER Turn DIAL TIMER to set the recording start time. You can set the recording start time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM 5 5 DIAL TIMER Press DIAL TIMER. “STOP” and the recording stop time alternately appear in the display window. 6 6 DIAL TIMER Turn DIAL TIMER to set the recording stop time. You can set the recording stop time in 15 minute intervals or adjust the time in one minute intervals by pressing the PROGRAM +/– buttons. PROGRAM Recording TV programmes using the Dial Timer (SLV-SE840D/E only) DIAL TIMER Press DIAL TIMER. The programme position or LINE input appears in the display window. DIAL TIMER Turn DIAL TIMER to set the programme position. INPUT SELECT To record from a decoder or other source connected to one or more of the LINE inputs, turn DIAL TIMER or press INPUT SELECT to display the connected line in the display window. DIAL TIMER Press DIAL TIMER to complete the setting. “OK” appears in the display window for about five seconds. The indicator appears in the display window and the VCR stands by for recording. To record from a decoder or other source, leave the connected equipment switched on. Basic Operations To return to the previous step To return to the previous step, press the PROGRAM + and – buttons on the VCR at the same time during any of the Dial Timer settings. To stop recording To stop the VCR while recording, press x (stop). To use the VCR after setting the timer To use the VCR before a recording begins, just press ?/1. The indicator turns off and the VCR switches on. Remember to press ?/1 to reset the VCR to recording standby after using the VCR. You can also do the following tasks while the VCR is recording: • Reset the counter (page 39). • Display tape information on the TV screen (page 42). • Check the timer settings (page 62). • Watch another TV programme (page 42). continued Recording TV programmes using the Dial Timer (SLV-SE840D/E only) To set the clock 1 Hold down DIAL TIMER so that “DAY” appears in the display window. However, if the clock has already been set, the current setting appears. 2 Turn DIAL TIMER to set the day. 3 Press DIAL TIMER. “MONTH” appears in the display window. 4 Turn and press DIAL TIMER to set the month, and then the year. After you set the year, “CLOCK” appears in the display window again. 5 Turn and press DIAL TIMER to set the hour and minute. 6 When you have finished setting the time, press DIAL TIMER to start the clock. Tips • To cancel a Dial Timer setting, press x (stop) on the VCR while you are making the setting. • The programme is recorded in the current tape speed mode. To change the tape speed, press SP/LP before you complete the setting in step 9. • To check, change, or cancel the programme setting, see “Checking/changing/ cancelling timer settings” on page 62. Notes • If eight programmes have already been set using the ShowView system or the TIMER PROGRAMMING menu, “FULL” appears in the display window for about five seconds. • The and indicators flash in the display window when you complete the setting in step 9 with no tape inserted. • If you set the clock using the Auto Clock Set function and AUTO CLOCK is set to ON, the clock will adjust itself to the incoming time signal regardless of adjustments made with the Dial Timer. Be sure you have set the Auto Clock Set correctly. • When the time is set incorrectly, “ERROR” appears in the display window in step 9. Set the timer again from step 1. • You cannot set the tape speed to AUTO using the Dial Timer. To select AUTO, set the tape speed in the TIMER PROGRAMMING menu (see page 62). Recording TV programmes using the Dial Timer (SLV-SE840D/E only) About the Demonstration Mode The Dial Timer function has a Demonstration Mode that allows the user, such as a salesperson, to enter more than eight examples of timer settings when demonstrating the use of the Dial Timer. It cancels the “FULL” notice which appears if eight programmes have already been...
Dieses Handbuch ist für folgende Modelle:Tragbare Kassettenspieler - SLV-SE240D (811.81 kb)
Tragbare Kassettenspieler - SLV-SE640D (811.79 kb)
Tragbare Kassettenspieler - SLV-SE640E (811.79 kb)
Tragbare Kassettenspieler - SLV-SE740D (811.79 kb)