Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Tragbare Kassettenspieler - SLV-SE840E (828.74 kb)
Tragbare Kassettenspieler - SLV-SE840E (829.92 kb)
Anleitung Zusammenfassung
Additional Operations To resume normal playback Press H (play). continued Playing/searching at various speeds Using Playback Dial on the Playback Dial VCR With Playback Dial, you can operate the following playback options. To Do this View the picture during fast-forward or rewind During fast-forward, turn and hold Playback Dial to the right (M (fast-forward)). During rewind, turn and hold Playback Dial to the left (m (rewind)). Play at high speed • During playback, quickly turn and release Playback Dial to the right ( M (fast-forward)) or left (m (rewind)). The tape continues to play at high speed. • During playback, turn and hold Playback Dial to the right (M (fast-forward)) or left (m (rewind)). When you release Playback Dial, normal playback resumes. Tip • Adjust the picture using the PROGRAM +/– buttons on the VCR if: –Streaks appear while playing in slow motion. – Bands appear at the top or bottom while pausing. – The picture shakes while pausing. To set tracking to the centre position, press both buttons (+/–) at the same time. Notes • The sound is muted during these operations. • In the LP mode, noise may appear or there may be no colour. • If the playback mode mark does not appear on the TV screen, press DISPLAY. • The picture may show noise when playing at high speed in reverse. • Do not turn Playback Dial forcibly. It may damage Playback Dial. Playing/searching at various speeds Setting the recording duration time After you have started recording in the normal way, you can have the VCR stop recording automatically after a specified duration. Before you start… • Refer to “Index to parts and controls” for button locations. 1 While recording, press z REC. The indicator appears in the display window. 2 Press z REC repeatedly to set the duration time. In SP mode Each press advances the time in increments of 30 minutes. 0:30 1:00 4:00 4:30 Normal recording In LP mode Each press advan0:30 ces the ti1:00 8:00 me as shown 9:00 below. Normal recording The tape counter decreases minute by minute to 0:00, then the VCR stops recording and turns off automatically. To extend the duration Press z REC repeatedly to set a new duration time. To cancel the duration Press z REC repeatedly until the indicator disappears and the VCR returns to the normal recording mode. To stop recording To stop the VCR while recording, press x (stop). Note • You cannot display the current tape time in the display window when setting the recording duration time. Additional Operations Setting the recording duration time Synchronized Recording (not available on SLV-SE640D/E and SE240D) You can set the VCR to automatically record programmes from equipment such as a satellite tuner by connecting the equipment to the LINE-3 (DEC/ EXT)*1 (or LINE-2 (DEC/EXT)*2) connector. The connected equipment must have a timer function for this feature to work. When the connected equipment turns on, the VCR also automatically turns on and starts recording a programme from LINE-3 (DEC/EXT)*1 (or LINE2 (DEC/EXT)*2). How to connect for Synchronized Recording Connect the LINE-3 (DEC/EXT)*1 (or LINE-2 (DEC/EXT)*2) connector of the VCR to the TV Scart connector of the satellite tuner. Then connect the LINE-1 (EURO AV) connector to the TV. Scart cable (not supplied) LINE-3 (DEC/EXT)*1 or LINE-2 (DEC/EXT)*2 LINE-1 (EURO AV) TV Scart connector Satellite tuner, etc. Scart cable (not supplied) Scart (EURO-AV) : Signal flow Synchronized Recording (not available on SLV-SE640D/E and SE240D) Recording programmes using SYNCHRO REC button/indicator the Synchronized Recording function Before you start... • Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. • Refer to “Index to parts and controls” for button locations. 1 Press INPUT SELECT or PROG +/– to display “L3*1 (or L2*2)” in the display window. 2 Set the timer on the connected equipment to the time of the programme you want to record, then turn it off. 3 Press SP/LP to select the tape speed. 4 Hold down SYNCHRO REC on the VCR for more than two seconds. The SYNCHRO REC indicator lights up in red and the VCR stands by for recording. The VCR automatically turns on and starts recording when it receives an input signal from the connected equipment. The VCR automatically stops recording when the tape reaches the end or when the connected equipment stops transmitting an input signal. To cancel the Synchronized Recording function Press SYNCHRO REC on the VCR. The SYNCHRO REC indicator disappears. To stop recording Press x (stop) while recording. Notes • This function may not work with some types of satellite tuners. • Some TVs or other equipment with timer functions will automatically turn off if no operation is performed within a certain amount of time. In this case, the Synchronized Recording also stops automatically. • When the connected equipment turns on while the SYNCHRO REC indicator lights up in red, recording starts automatically. • If the settings for timer record...
Dieses Handbuch ist für folgende Modelle:Tragbare Kassettenspieler - SLV-SE240D (811.81 kb)
Tragbare Kassettenspieler - SLV-SE640D (811.79 kb)
Tragbare Kassettenspieler - SLV-SE640E (811.79 kb)
Tragbare Kassettenspieler - SLV-SE740D (811.79 kb)