Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Anleitung Panasonic, modell VV1309

Hersteller: Panasonic
Dateigröße: 1.8 mb
Dateiname: VV1309.PDF
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite

Anleitung Zusammenfassung

(Daylight Saving Time.) To Make Corrections, repeatedly press ^ to move to error, then correct. 5 End setup. Press ACTION twice to start the clock and exit this mode. O SELECT/ . SET :CH UP :CH DOWN :VOL UP :VOL DOWN 1 ACTION NUMBERED Keys — ADD/DLT Add or Delete a Channel To add channel: Select channel with NUMBERED keys and press ADD/DLT. CHANNEL 08 ADDED To delete channel: Select channel with CH AT or NUMBERED keys and press ADD/DLT. CHANNEL 08 DELETED 33 For Your Information Unit Information Reset all Combination VCR Memory Functions Head Cleaning Use when moving Combination VCR to new location, or if a mistake was made in the One Time Setup section. • Make sure a tape is not inserted in the Combination VCR. Model VV-2009 unit is shown here. 1 - —-— —. L_ ©@ .JtUJLUJ l“UZALU. f o ® p / X- -J. I Turn the Combina VCR Power on. tion Press and hold both the PLAY and FF on the Combination VCR for more than 5 seconds. • The power will shut oft. Do “One Time Setup” Steps on page 6. DST (Daylight Saving Time) Combination VCR auto adjusts clock for DST (Daylight Saving Time.) Spring (First Sunday in April) DST:ON Sets clock ahead one hour. 1:00 a.m. 2:00 a.m. NORMAL TIME DAYLIGHT SAVING TIME 3:00 a.m. 4:00 a.m. Autumn (Last Sunday in October) DST:ON Turns clock back one hour. NORMAL TIME 1:00 a.m. 2:00 a.m. If your area does not observe Daylight Saving Time, select DST: OFF. Keep these time changes in mind when programming the Combination VCR for timer recordings. Playing older or damaged tapes may eventually cause video heads to become clogged. Head Clog Sensor During playback this screen appears if clogging is detected. To remove screen, press PLAY on the remote or Combination VCR. • Use “dry” type head cleaning cassette only. (Part No. NV-TCL30PT is recommended.) • Follow cleaning tape carefully. Excessive use of tape can shorten head life. • If head clog symptoms persist, contact your nearest Factory Service Center or authorized Service Center. (See page 37.) VIDEO HEADS MAY NEED CLEANING PLEASE INSERT HEAD CLEANING CASSETTE OR REFER TO MANUAL END:PLAY KEY Specifications Display Picture Tube: VCR 13 inch (VV-1309A/V-1319W) 20 inch (VV-2009) measured diagonal 90° deflection Picture Tube Video Recording System:2 rotary heads helical scanning system Audio Track: Tuner: Broadcast Channels: CABLE Channels: General Power Source: Power Consumption: 1 track VHF2-13, UHF 14-69 Midband A through I (14-22) Superband J through W (23-36) Hyperband AA-EEE (37-64) Lowband A-5-A-1 (95-99) Special CABLE channel 5A (01) 120V AC, 60 Hz Television System: Speaker: Operating Temperature: Operating Humidity: Weight: DAYLIGHT 1:00 a.m. 2:00 a.m. Dimensions: SAVING TIME Approx. 69 watts (VV-1309/VV-1319W) Approx. 110 watts (VV-2009) Power Off Approx. 4.5 watts EIA Standard NTSC color 1 piece 41°F~104°F (5°C-40°C) 10%~75% 26.4 lbs. (12 Kg) (VV-1309/VV-1319W) 50.7 lbs. (23 Kg) (VV-2009) 15-3/16” (W)X 15-3/16” (H)X 14-3/4” (D) 386 (W) X 385 (H) X 374 (D) mm (VV-1309/VV-1319W) 20-5/16” (W) X 19-7/8” (H) X 18-11/16” (D) 515 (W) X 505 (H)X 474(D) mm (VV-2009) Note: Designs and specifications are subject to change without notice. 34 For assistance, call 1 -800-211-PANA(7262) On-Screen Displays (OSD) VCR Status & Clock Display Channel & Function Display To display or remove the overlay. Press DISPLAY. When a function button is pressed (PLAY, FF, etc.) or you change channels, the Combination VCR mode or channel number will be displayed. (Some station names may also appear if Channel Caption is set. See pages 22, 23.) Function Status Current time Channel Caption Rec Time Remaining . (OTR mode only see page 11.) 4-1- REC 12:0 1ЕС 12:00PM ABC -0:25 -0:12:34- SP 12/27/1999 MON 12:00PM - 1:00PM CH 08 ABC MOVIE MEMORIAL MOVIE Counter Time Stamp Data Tape Speed (see pages 24, 25.) Blue Screen Display Whenever a blank section of a tape comes up in Play mode, or when the selected channel has no broadcast signal with the “Weak Signal Display ON/OFF” (page 26) set to “OFF,” the TV screen will turn solid blue. Warning and Instruction Displays operation or provide further instructions. OSD Caution Pg OSD Caution Pg NO CH FOUND PLEASE CHECK ANTENNA CABLE CONNECTION THEN PUSH CH UP KEY AGAIN If no active channels are found for CHANNEL MEMORY... 5 NO CASSETTE PLEASE INSERT A CASSETTE If you press PLAY, FF, REW, or REC on the remote control or the Combination VCR without a cassette inserted... 10 11 PLEASE SET CLOCK BEFORE PROGRAMMING If you attempt to set or review a Timer Recording or set the On-Timer and the Clock is not set... 6 7 33 PLEASE PREPARE FOR TIMER REC If the Combination VCR is not in Stop mode or a cassette with record tab is not inserted two minutes before a Timer Recording is about to begin... 12 13 CHECK CASSETTE RECORD TAB If you press REC on the remote control or the Combination VCR, and a cassette is inserted with no record tab.....


Geben Sie zwei Ziffern: