Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Kameras - DCR-TRV80E (6.97 mb)
Kameras - DCR-TRV80E (6.95 mb)
Kameras - DCR-TRV80E (7.1 mb)
Anleitung Zusammenfassung
c The item “DNS” may not be set correctly. Check the setup of the PPP screen or LAN screen. c The item “Proxy” may not be set correctly. Check the setup of the Browser screen. 95-GB Troubleshooting Troubles about sending a still image – DCR-TRV80/TRV80E only SEND does not function. c A still image is not being played back. c An invalid image is being played back. The message “Bluetooth Authentication Error” appears, and you cannot send a still image. c The authentication time limit (30 seconds) is over. c You did not enter the correct passkey. c The connected device was disconnected. c The passkey you entered is wrong. Enter the correct passkey. The message “Bluetooth Connection Error” appears, and you cannot send a still image. c The Bluetooth device you want to connect to is not turned on. c The Bluetooth device is too far from your camcorder. c The radio waves between your camcorder and the connected device were blocked. c The Bluetooth device you want to connect to is already connected to other devices. c The connected device was disconnected. c The Bluetooth device you want to connect to is not compatible with BIP. The message “Bluetooth Communication Disconnected” or “Send Error” appears, and you cannot send a still image. c The connected Bluetooth device is turned off. c The Bluetooth device is too far from your camcorder. c The radio waves between your camcorder and the connected device were blocked. c The connected device was disconnected. c The Bluetooth device you want to connect to is not compatible with BIP. c The connection was rejected by the connected Bluetooth device. Check the settings or operations of the connected device. c You sent the still image that the connected Bluetooth device cannot receive. 96-GB Troubleshooting Troubles about receiving a still image – DCR-TRV80/TRV80E only The message “Bluetooth Authentication Error” appears, and you cannot receive a still image. c The authentication time limit (30 seconds) is over. c You did not enter the correct passkey. c The connected device disconnects or ends the connection. c The passkey you entered is wrong. Enter the correct passkey. The message “Bluetooth Communication Disconnected” or “Error Receiving” appears, and you cannot send a still image. c The connected Bluetooth device is turned off. c The Bluetooth device is too far from your camcorder. c The radio waves between your camcorder and the connected device were blocked. c The connected device disconnects or ends the connection. c The “Memory Stick” does not have enough capacity. c The sent still image is not a JPG or JPEG file. c The sent still image file is too large. The message “Bluetooth connection Timeout” appears. c If your camcorder does not receive any requests from the connected device for five minutes, the connection is disconnected or the camera becomes non-connectable. Connect your camcorder and the Bluetooth device again. No req...