Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Fotos und technische Daten Sony DCR-TRV285E |
Anleitung Zusammenfassung
IUSBI 1 Check that your camcorder is connected to a computer. 2 Right-click [My Computer], then click [Properties]. The [System Properties] screen appears. 3 Click the [Hardware] tab. 4 Click [Device Manager]. 5 Click [View], then click [Devices by type]. 6 If devices below are already installed, right-click them, then click [Uninstall] to delete them. For copying and viewing pictures recorded on a tape • [USB Composite Device] in the [Universal Serial Bus Controller] folder • [USB Audio Device] in the [Sound, video and game controller] folder • [Composite USB Device] in the [Other devices] folder 7 When the [Confirm Device Removal] screen appears, click [OK]. 8 Turn off the power of your camcorder, disconnect the USB cable, then restart the computer. 9 Place the CD-ROM in the disc drive of your computer. 10 Follow the steps below and try to install the USB driver again. 1 Double-click [My Computer]. 2 Right-click [PICTUREPACKAGE] (Disc drive)*. * Drive names (such as (E:)) may vary depending on the computer. 3 Click [Open]. 4 Double-click [Driver]. 5 Double-click [Setup.exe]. b Note • Deleting anything other than [USB Composite Device], [USB Audio Device], and [Composite USB Device] may cause malfunction of your computer. ,continued Troubleshooting 89 Troubleshooting Symptom Cause and/or Corrective Actions For [)TRV270E/285E: For Windows XP The image does not appear on the Log on as Administrators. screen of the Windows computer when using the USB cable. IUSB 1 Check that your camcorder is connected to a computer. 2 Click [Start]. 3 Right-click [My Computer], then click [Properties]. The [System Properties] screen appears. 4 Click the [Hardware] tab. 5 Click [Device Manager]. 6 Click [View], then click [Devices by type]. 7 If devices below are already installed, right-click them, then click [Uninstall] to delete them. For copying and viewing pictures recorded on a tape • [USB Composite Device] in the [Universal Serial Bus Controller] folder • [USB Audio Device] in the [Sound, video and game controllers] folder • [USB Device] in the [Other devices] folder 8 When the [Confirm Device Removal] screen appears, click [OK]. 9 Turn off the power of your camcorder, disconnect the USB cable, then restart the computer. 10 Place the CD-ROM in the disc drive of your computer. 11 Follow the steps below and try to install the USB driver again. 1 Double-click [My Computer]. 2 Right-click [PICTUREPACKAGE] (Disc drive)*. * Drive names (such as (E:)) may vary depending on the computer. 3 Click [Open]. 4 Double-click [Driver]. 5 Double-click [Setup.exe]. b Note • Deleting anything other than [USB Composite Device], [USB Audio Device], and [USB Device] may cause malfunction of your computer. For [)TRV270E/285E: C You cannot start the simple operation settings while the USB cable is [Cannot start Easy Handycam with connected. Disconnect the USB cable from your camcorder first. USB connected] appears on the screen of your camcorder. IUSB 90 Troubleshooting Symptom Cause and/or Corrective Actions For BTRV270E/285E: There is no sound when the camcorder is connected to the Windows computer via a USB cable. HJSB1 C Change the settings for your computer environment as described in the following procedures: 1 Select [Start], [Programs] ([All Programs] for Windows XP), [Picture Package], [Handycam Tools], and [USB Streaming Tool], then start up [USB Streaming Tool]. 2 Select another device on the [Select audio device] screen. 3 Follow the on-screen instructions, click [Next], then click [Done]. b Note • Sound is not supported on Windows 98. For BTRV270E/285E: The movie is not smooth during USB streaming. IUSBI C Change the settings as described in the following procedures: 1 Select [Start], [Programs] ([All Programs] for Windows XP), [Picture Package], [Handycam Tools], and [USB Streaming Tool], then start up [USB Streaming Tool]. 2 Adjust the slider in the (-) direction on [Select video quality]. 3 Follow the on-screen instructions, click [Next], then click [Done]. For BTRV270E/285E: Picture Package does not function correctly. C Close Picture Package, then restart the Windows computer. For E)TRV270E/285E: An error message appears while operating Picture Package. C Close Picture Package on your Windows computer first, then set the POWER switch on your camcorder to another mode. For BTRV270E/285E: The CD-R drive is not recognized or data cannot be written on the CD-R in Picture Package Auto Video, Producer, CD Backup or VCD Maker. CFor the compatible drive, visit the following URL: http: // For BTRV270E/285E: “First Step Guide” is not displayed correctly. C Refer to “First Step Guide” in PDF. For copying the PDF file, see page 78. Troubleshooting 91 Troubleshooting Warning indicators and messages Self-diagnosis display/Warning indicators If indicators appear on the screen, check the fo...
Dieses Handbuch ist für folgende Modelle:Kameras - CCD-TRV238E (2.9 mb)
Kameras - CCD-TRV438E (2.9 mb)
Kameras - DCR-TRV270E (2.9 mb)