Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Fotos und technische Daten Sony CCD-TRV438E |
Anleitung Zusammenfassung
When you press the SEL/PUSH EXEC dial at step 4, the title is recorded. b Notes • If you display the menu while superimposing a title, the title is not recorded while the menu is displayed. • When you are selecting and setting the title, the title displayed on the screen is not recorded. • When you superimpose a title while you are recording, the beep does not sound. • When you are using your camcorder on the battery pack and do not operate it for 5 minutes, the power automatically goes off as the default setting. If you may take 5 minutes or longer to enter characters, set [A.SHUT OFF] in the |re| (OTHERS) menu to [NEVER] (p. 58). The power will not be turned off. Even though the power goes off, the characters you have entered remain stored in memory. Turn the power back on, then start again from step 1 to continue superimposing the title. • For HS0TRV238E/438E: The date and time, or either of them, may not be displayed depending on the size or position of the title. Z Tip • To change a created title, select the title in step 1. Turn the SEL/PUSH EXEC dial to select [CREATE/ EDIT] and press the dial, then reselect characters. Searching for the last scene of the most recent recording - END SEARCH This function is handy when you have played back the tape, for example, but want to start recording right after the most recently recorded scene. The END SEARCH function will not work once you eject the cassette after you have recorded on the tape. END SEARCH POWER switch 1 Slide the POWER switch to select the CAMERA mode. 2 Press END SEARCH. The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has finished. To cancel the operation Press END SEARCH again. b Note • The END SEARCH function will not work correctly when there is a blank section between recorded sections on the tape. Z Tip • When PLAY/EDIT mode is selected, you can do this operation by pressing END SEARCH. 32 Recording Playback Viewing pictures recorded on a tape Make sure you have a recorded cassette inserted into your camcorder. When you want to play back the recorded picture on your TV, see page 38. For HIHTRV238E/438E/BTRV285E: You can control playback using the Remote Commander. Z Tip • Performing Easy Handycam operation, even first time users can play back easily. For details, see page 35. 1 Press OPEN and open the LCD panel. 2 Slide the POWER switch repeatedly to select the PLAY/EDIT mode. Slide the POWER switch while pressing the green button. 3 Press (fS|) (rewind) to go to the point you want to view. 4 Press (play) to start playback. To adjust the volume Press either of the two buttons on VOLUME. When you close the LCD panel, sound is turned off. CE) : To turn the volume down CE) : To turn the volume up To stop playback Press m (stop). To pause Press (fill) (pause) during playback. Press (TÜ!) (pause) or (^-]) (play) to restart the playback. Playback stops automatically when pause mode continues for a few minutes. To fast forward or rewind Press (^0) (fast forward) or (rewind) in stop mode. To review movies on the viewfinder Close the LCD panel. Indicators displayed during playing back For Hi El TRV238E/438E: ,continued Playback 33 Playback For BTRV270E/285E: A Remaining battery time B Recording mode (SP or LP) C Tape transport indicator D Tape counter (hour: minute: second) (HS0TRV238E/438E) E Hi8 format (HiHTRV238E/438E) This appears while playing back Hi8 format tapes. F Time code (hour: minute: second: frame) or tape counter (hour: minute: second) (EJTRV270E/285E) b Note • For DTRV270E/285E: If you use a standard 8 mm [0 tape, be sure to play back the tape on your camcorder. Mosaic noise may appear when you play back the standard 8 mm |0 tape on other camcorders (including another DCR-TRV270E/TRV285E). Playing back in various modes To fast forward or rewind during playback - Picture search Keep on pressing (^0) (fast forward) or (rewind) during playback. To resume normal playback, release the button. To view the picture while fast forwarding or rewinding - Skip scan Keep on pressing (fast forward) or (rewind) while fast forwarding or rewinding the tape. To resume fast forwarding or rewinding, release the button. To view pictures at slow speed (slow playback)* For HiHTRV238E/438E/EiTRV285E: Press SLOW y on the Remote Commander during playback. To resume normal playback, press PLAY. • For E*TRV285E: Pictures output from the ^ DV Interface cannot be played back smoothly in the slow mode. b Notes • For HI0TRV238E/438E: If slow playback lasts for about 1 minute, the camcorder automatically returns to normal speed playback. • For HI0TRV238E/438E: When you play back a tape recorded in the LP mode, noise may appear on the LCD screen in the following cases: - Slow playback - Playback pause - Picture search 34 Playback Playing back with ease - Easy Handycam Easy ...
Dieses Handbuch ist für folgende Modelle:Kameras - CCD-TRV238E (2.9 mb)
Kameras - DCR-TRV270E (2.9 mb)
Kameras - DCR-TRV285E (2.9 mb)