Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
The focus selector lock switch only takes effect when the monitor is off . Using the Multi Selector Setup The Setup Menu Format Memory cards must be formatted before first use. Format ting mem o ry cards is also an effective way of de let ing all pictures on the card. Selecting Format displays the following options. Press the multi selector up or down to highlight an option and then press the button: Option Description No Exit without formatting memory card. Yes Format memory card. Message shown at right displayed while formatting is in progress. Do not turn the camera off, remove the batteries or memory card, or unplug the AC adapter (available separately) until formatting is complete and setup menu is displayed. LCD Brightness Press the multi selector up to increase brightness, down to decrease. The num ber to the right of the dis play indicates the current bright ness level, with +2 the brightest setting and –2 the darkest. Press the multi selector to the right to complete the operation and return to the set up menu. Before Formatting Formatting memory cards permanently deletes all data they contain, in clud ing hidden and protected pictures and any other data that may be on the card. Be fore for mat ting, be sure to transfer to a computer any pictures you would like to keep. FAT 32 The D200 supports FAT 32, allowing use of memory cards with capacities of over 2 GB. FAT 16 is used when reformatting cards already formatted in FAT 16. Two -Button Format Memory cards can also be formatted with the ( and ) buttons ( 14). 116 Mirror Lock-Up This option is used to lock the mirror in the up position to allow inspection or cleaning of the low-pass filter that protects the image sensor. See “ Technical Notes: Caring for the Camera” ( 185). This option is not available at battery levels of or below, while multiple exposures are being shot, or when the camera is powered by an optional MBD200 battery pack using AA batteries. Use a fully-charged EN-EL3e battery or an optional AC adapter. If the battery runs low while the mirror is raised, a beep will sound and the AF-assist illuminator will blink to warn you that the mirror will automatically lower in about two minutes. Video Mode Before connecting your camera to a video device such as a television or VCR ( 106), choose a video mode setting that matches the video standard used in the device. Option Description NTSC Use when connecting camera to NTSC devices. PAL Use when connecting camera to PAL devices. Note that number of pixels in output is selectively reduced, causing drop in resolution. World Time World Time is used to set the camera clock to the current date and time ( 12). The Clock Battery The clock-calendar is powered by an independent, rechargeable power source, which is charged as necessary when the main batteries are installed or the camera is powered by an optional EH-6 AC adapter. Two days of charging will power the clock for about three months. If the icon flashes in the control panel, the clock battery is exhausted and the clock has been reset to a time starting at 2005.01.01.00:00:00. Set the clock to the correct date and time. Setup The Setup Menu 117 Language Choose the language for camera menus and messages from: De Deutsch German Py Русский Russian En English English Sv Svenska Swedish Es Espanol Spanish Traditional Chinese Fr Francais French Simplified Chinese It Italiano Italian Japanese Ne Nederlands Dutch Korean Po Por tugues Portuguese Image Comment The Setup MenuSetup Add brief text com ments to photographs as they are tak- en. Com ments can be viewed when the pho to graphs are displayed using the supplied software or Nikon Capture 4 Version 4.4 or later (available separately). The first fifteen let ters of the comment are also visible on Shooting Data Page 2 in the pho to in forma tion dis play ( 100). Done: Save changes and return to the setup menu. Input Comment: The following dialog will be displayed. Enter a comment as de- scribed below. Keyboard area: Use multi selector to highlight letters, press center of multi selector to select. Comment area: Comment appears here. To move cursor, press button and use multi selector. To delete the character at the current cursor position, press the button. To return to the setup menu without changing the comment, press the button. Comments can be up to thirty-six characters long. Any additional characters will be deleted. After editing the comment, press to return to the image comment menu. Attach Comment: A comment is added to all photographs taken when this option is checked (.). Highlight this option and press the multi selector to the right to toggle the check mark on or off . 118 Auto Image Rotation Photographs taken while On (the default option) is se- lected contain information on camera orientation, allow- ing them to be rotated automatically during playback ( 98) or when viewed in compatible Nikon software.* The following orientations are recorded: Landscape (wide) orientation Camera rotat...