Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
button. • Press the .. button to broaden or the .. button to narrow the focusing distance from the center. 3 Press the FUNC. button and shoot the image with the manual focus (p. 66). • The Focus-BKT mode is not available when shooting with the flash on. Only one image at the manual focus position will be taken. • Three images are shot continuously regardless of the continuous shooting setting (p. 42). Adjusting the ISO Speed Adjusting the ISO Speed Raise the ISO speed when you wish to reduce the effects of shaking hands and shoot with the flash off in a dark area or when you wish to reduce the effects of a moving subject and raise the shutter speed. 1 Press the ISO button to switch settings. • Cycle through the (High ISO Auto)• • • • • • (does not display) with each press of the button. • When Auto is selected, the optimal speed is selected based on the brightness of the environment at the time of shooting. The speed is automatically increased in dark places, increasing the shutter speed and reducing shaking effects. • When is selected, a speed higher than when using Auto is selected. The shutter speed increases even more, and blurriness from hand or subject movement in a scene is less than when taken in Auto. There may be an increase in noise, however, when compared to Auto. ISO Speed Settings Auto ..* ..* ..* ..* – High ISO Auto • • – – – ISO80 – • • • ..* ISO100 – • • • • ISO200 – • • • • ISO400 – • • • • ISO800 – • • • • Advanced Shooting Functions ..: Available * : Default setting 69 Locking the Exposure Setting (AE Lock) Shooting Mode You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. You must set the flash to . The AE lock cannot be set if the flash fires. 1 Focus on the part of the subject on which you wish to lock the exposure setting. 2 Press the shutter button halfway and press the ISO button. • The will display. 3 Re-aim the camera to compose the shot as desired and press the shutter button fully. To Release the AE Lock: Press anything except the .., .., .. or • button. • AE lock can also be set and released in mode (p. 46). • You can use the FE lock when using the flash. Changing shutter speed and aperture value combinations Automatically selected combinations of shutter speeds and aperture values can be freely changed without altering the exposure (Program Shift). 1 Turn the mode dial to , , or . 2 Focus on the subject on which you wish to lock the exposure. 3 Press the ISO button while pressing the shutter button halfway. • The exposure setting locks and appears on the LCD monitor (or viewfinder). 4 Press the .. or • button until the desired shutter speed or aperture value is reached. 5 Recompose the image and shoot. • The setting will cancel after the shot is taken. Advanced Shooting Functions 71 Shooting with FE Lock Shooting Mode You can obtain the correct exposure regardless of the location of your subject in the composition. 1 Raise the flash. 2 Press the button and set it to (flash on). 3 Focus on the part of the subject on which you wish to lock the flash exposure setting. 4 Press the shutter button halfway and press the ISO button. • The flash will pre-fire and will display. 5 Re-aim the camera to compose the shot as desired and press the shutter button fully. To Release the FE Lock: Press anything except the .., .., .. or • button. Switching between Metering Modes Shooting Mode Metering Methods Evaluative Center-Weighted Average Spot AE Point Center The camera divides images into several zones for light metering. The camera evaluates complex lighting conditions, such as the position of the subject, the brightness, the background, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject. Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center. Meters the area within the spot AE point frame. Locks the spot metering frame to the center of the LCD monitor (or viewfinder). AF Point Moves the spot AE point to the AF frame. 1 FUNC. Menu * (Evaluative) (Center-Weighted Average) (Spot AE Point). See Menus and Settings (p. 26) * Default setting. • Use the .. or .. button to adjust the exposure compensation and press the FUNC. button. Advanced Shooting Functions 73 Moving the Spot AE Point to the AF Frame/ Centering the Spot AE Point 1 (Rec.) Menu [Spot AE Point] [Center]* or [AF Point]. See Menus and Settings 1 (Rec.) Menu [Spot AE Point] [Center]* or [AF Point]. See Menus and Settings (p. 26) ..When [Spot AE Point] is set to [Center], the spot AE point frame [ ] appears at the center of the LCD monitor (or viewfinder). The AF frame can be repositioned (p. 63). ..With [AF Point], one AE point appears within the AF frame. This frame can be moved as one piece. * Default setting. [ ] Spot AE Point AF Frame Adjusting the Exposure Compensation Shooting Mode *Cannot be set in and mode...