Stimmen - 4, Durchschnittliche Bewertung: 4.5
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
If you connect an Anynet+ supported TV to the camcorder with an HDMI cable, turning on the camcorder may turn the TV’s power on. (an Anynet+ function) If you don’t want this to occur, set “Anynet+ (HDMI-CEC)” to “Off”. ..page 86 Use only HDMI 1.3 cable when connecting to the HDMI jack of this camcorder. If you use another type of HDMI cable, the screen display may not work. CONNECTING TO A REGULAR TV You can view images recorded with your camcorder on a regular TV that supports standard definition. This camcorder supports the composite output for standard definition video transfer. PRECHECK! Use the AC power adaptor to power the camcorder when you connect it to a TV. Connecting an Audio/Video cable for the composite output 1. Connect the camcorder to a TV with an Audio/Video cable. Turn on the camcorder, and then connect an Audio/Video cable. If you do not turn on the camcorder first, the camcorder may fail to recognise the connected TV. 2. Set the TV’s input or source selector to the input you’ve attached the camcorder to. Refer to the TV’s instruction manual to see how to select the TV input. 3. Select the playback mode on your camcorder, and then start to play back videos or photos. ..pages 41~43 • • Make sure you’ve connected the camcorder to the correct input jacks. The TV screen may not display the right video information if the camcorder is connected incorrectly. When connecting to a TV using the Audio/Video cable, match the colour of the cables to the colour of the corresponding jacks. Video input may appear green depending on the TV. If this occurs, connect the yellow plug of the Audio/Video cable to the green jack of the TV. When the camcorder is connected to a TV with more than one type of cable, the camcorder outputs video signals in the following order of priority: - HDMI .. Audio/Video (composite) output This camcorder comes with the “TV Connect Guide” menu function. If you try to connect the camcorder to a TV and don’t have your user’s manual, you can use the “TV Connect Guide” menu function to view connection instructions on the camcorder’s screen. ..page 83 If your TV has one audio jack (mono input), connect the yellow plug of the Audio/Video cable to the video jack, the white plug to the audio jack, and leave the red plug unconnected. When you connect the camcorder to a TV using the Audio/Video cable, images recorded in high-definition image quality (1080/50i or 720/50p) are played back in standard definition image quality. .. .. .. .. .. .. .. 89 Camcorder Signal flow Audio/Video cable Regular TV connecting to a TV VIEWING ON A TV SCREEN Image appearance depends on the TV screen aspect ratio Recording ratio Appearance on Wide (16:9) TV Appearance on 4:3 TV Images recorded in a 16:9 ratio: • Video images • Photo images • Photo capture images • Adjust the volume to a moderate level. If the volume is too high, the video may include noise. • If “TV Display” is set to “Off”, the TV screen does not display the camcorder’s OSD (On Screen Display) menus. ..page 84 dubbing videos DUBBING TO A VCR OR DVD/HDD RECORDER Videos recorded in this camcorder can be dubbed to a VCR or DVD/HDD recorders. PRECHECK! • Videos are dubbed to the other recording device via analogue data transfer (composite connection). Use the supplied Audio/Video cable. • Use the AC power adaptor to power the camcorder when you dub to a VCR or DVD/HDD recorder. Camcorder Signal flow Audio/Video cable VCR or DVD/HDD recorder 1. Connect your camcorder to the recording device (VCR or DVD/HDD recorder) with the Audio/Video cable. • Connect your camcorder to the input jacks of the recording device. • If your recording device has an input selector, set it to the correct input mode. 2. Insert the storage device (tape, disc, etc.) into the recording device. 3. Start the playback on your camcorder, and record it on the recording device. • Refer to the instruction manuals supplied with your recording device for details. 4. When dubbing is finished, stop the recording device and your camcorder. Videos recorded on this camcorder can only be dubbed using the Audio/Video cable in SD (standard definition) image quality, regardless of the recording resolution (HD/SD). You cannot dub to a recorder with an HDMI cable. To copy a video recorded in HD (high definition) image quality, use the internal software of your camcorder, and copy the video to your computer. ..page 95 Because dubbing is performed via analogue data transfer, the image quality may deteriorate. To hide the screen indicators (such as the counter, etc.) on the screen of the connected monitor device set “TV Display: Off”. ..page 84 To record the date/time, display it on the screen. ..page 77 printing photos DIRECT PRINTING WITH A PICTBRIDGE PRINTER You can print photos directly by connecting your camcorder to a PictBridge printer (sold separately) using a USB cable. PRECHECK! • Insert the memory card. ..page 28 • Select the Play ( ) tab on the LCD screen to select the Photo play ( ) ...
Dieses Handbuch ist für folgende Modelle:Kameras - HMX-T10BP (6.66 mb)
Kameras - HMX-T10OP (6.66 mb)
Kameras - HMX-T10WP (6.66 mb)