Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
18 Playback Options Forward and Reverse Searching (SP/LP/SLP) During tape playback, press and release the FF/SEARCH button or the REW(ind)/SEARCH button. A fast forward or reverse picture search will begin. (Noise bars will appear.) 2 To stop searching, press the STOP button. To return to playback, press the PLAY button. Super High Speed Searching (LP/SLP) 1 During tape playback, press the FF/SEARCH button or the REW(ind)/SEARCH button twice. Now, the VCP will search in super high speed. (Noise bars will appear.) 2 To return to playback, press the PLAY button. Viewing a Still Picture 1 During tape playback, press the STILL button. A still picture will appear on the screen. Tapes recorded in SLP (Super Long Play) will show the clearest picture. 2 Each time you press the STILL button, the noise bars will change position on the screen. The tape also will advance slightly. If a still picture vibrates vertically, stabilize it by pressing the TRACKING (Up/Down) buttons on the remote control. 3 To release the still picture and return to normal playback, press the PLAY button. Helpful Hints POWER EJECT REW/SEARCH PLAY FF/SEARCH STOP STILL TRACKING • SP/LP/SLP means this feature will work with tapes recorded in Standard Play, Long Play, or Super Long Play. • LP/SLP means this feature will work with tapes recorded in Long Play or Super Long Play. For details about tape speed, see page five. • Still mode automatically switches to Stop mode after five minutes to protect the VCP and the tape from damage. Automatic Operation Features 19 Direct Button Operation When a tape is in the VCP and the VCP power is off, press the PLAY, REW(ind), or F.FWD button on the VCP. The VCP will turn on automatically and playback, rewinding, or fast forwarding will start immediately. Automatic Playback When you put a tape in the VCP, the power will come on and playback will begin automatically. Automatic Rewind, Off, Eject When a tape is played or fast forwarded to its end, the VCP will rewind the tape, stop, turn itself off, and eject the tape. (The VCP will not operate this way if Repeat Playback is activated. Details are on page 17.) Tape Eject A tape can be ejected with the VCP power on or off (but the VCP power cord must be plugged in). Automatic Tracking Adjustment The VCP has automatic tracking adjustment, which gives you the best possible picture quality. With some recordings, however, you may get a better picture using the manual tracking controls (see below). Manual Tracking To adjust the tracking manually during tape playback, press the TRACKING (Up/Down) buttons on the remote control. NOTE: • Tracking is returned to automatic tracking adjustment when a tape is inserted or when the STOP button is pressed to halt playback. Before tracking adjustment After tracking adjustment 20 Helpful Hints If you are having problems with your product, check this list of problems and possible solutions before requesting service. You may be able to solve the problem yourself. If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you. The VCP has no power. . Make sure the AC power cord is connected completely to an AC (alternating current) outlet. If you are using AC power, make sure the car battery cord is disconnected completely. . Make sure the car battery cord is connected completely to the vehicle’s cigarette lighter socket and to the 13.2V Jack on the back of the VCP when the VCP is installed in the vehicle. l Make sure the power is turned on. There is no playback picture, or the playback picture is noisy and contains streaks. l Make sure the TV is on the same channel as the VCP’s CH3/CH4 switch (pages six-nine). l Make sure channel 3 or 4 is adjusted properly. l Adjust the tracking (page 19). . TVs placed too close to the VCP can cause interference during tape playback. Move the VCP away from the TV. The VCP can not be controlled with the remote control. l Aim the remote control directly at the VCP’s remote sensor (pages five and 14). l Remove all obstacles between the remote control and the VCP. l Inspect and/or replace the batteries in the remote control (page five). TV programs can not be watched normally. . Check the connections between the VCP, your TV, the Cable Box (if applicable), and the antenna/cable (pages six-10). l Turn off the VCP power. Tape can not be inserted. l Insert the tape window side up, with the record tab facing you. . Make sure a tape isn’t already in the VCP by pressing the STOP/EJECT button on the VCP or the EJECT button on the remote control. l Gently push on the center of the tape when putting it in the VCP. Ne...
Dieses Handbuch ist für folgende Modelle:Tragbare Kassettenspieler - VPA115AT (424.23 kb)