Login:
Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Anleitung Audiovox, modell AVP-7200A

Hersteller: Audiovox
Dateigröße: 1.13 mb
Dateiname: 3669dc50-962d-44e5-a42d-3fe214a9dedc.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes. Do not leave tapes on the floor of the vehicle. Store tapes not being used in their cases. Do not leave video tapes inside a hot vehicle. 6 FEATURES CONGRATULATIONS on your purchase of the This unit is designed to satisfy all your VHS tape playback needs and with proper The features of the Model AVP-7200A Video Cassette Player include: • DIGITAL AUTO TRACKING This VCP plays clear pictures without special operations. In the Auto Tracking Mode, the PLAY indicator blinks. • SELF PICTURE ADJUSTMENT Since HEAD DRUM rotation continuously compensates for voltage change • AUTO START FUNCTION This VCP will automatically power on and go into PLAY mode when a cassette • AUTO REPEAT PLAYBACK In the AUTO REPEAT mode, the VCP will , at the end of the tape ,rewind and enter • TWO TYPES OF INFRARED (IR) INPUT FOR REMOTE CONTROL Two-wire interface with various Audiovox IR products such as VOH-681/682 and three-wire . (P/N 136-2070) • DC Operation with specialized tape mechanism • Diamond Like Coated (DLC) Video Head A special coating on the tape drum which prevents oxide and moisture build-up. • IIluminated function buttons • DEW SENSOR Prevents a tape from being played when moisture is detected in the unit. 7 CONTROLS AND INDICATORS 8 FRONT PANEL ! Cassette Compartment Accepts the VHS tape for playback. @ CST-IN Indicator Lights green when the cassette is inserted. # DEW Indicator When power is on, this indicator flashes red to indicate excessive moisture buildup inside the VCP. The unit will not operate until it dries out sufficiently (the tape can be ejected from the unit). When DEW mode has been activated, leave the unit on to allow it to dry out completely. CONTROLS AND INDICA TORS (CONTINUED ) $ Power Button When pressed this button alternately turns the off. When power is applied to the unit, the power indicator lights red. The Power ON and Power OFF mode will be toggled by pressing this key. When the POWER is switched on, the power lamp will light up in red and the other function buttons light green. % Auto Repeat Indicator In the Auto Repeat Playback mode, this indicator lights red. ^ Stop/Eject Button When pressed once, the tape is stopped. When pressed again the tape is ejected. & Rewind/Review Button If this button is pressed in the PLAYBACK mode, the VCP enters the reverse picture search mode. If pressed in STOP mode, the tape wiII rewind at high speed and the REW indicator will light orange. * PLAY Button Press this key to play back a recorded tape. In the playback mode, the playback indicator lights orange, and in Tracking mode, this indicator will blink. ( Fast Forward/Cue Button When this button is pressed during playback, the FF indicator lights orange and the VCP enters the forward picture search mode. When pressed during stop, the tape will fast forward at high speed. ) AUDIO/VIDEO IN Jacks Connect these jacks to the audio/video out jacks terminal of your Game machine or Camcorder using the RCA cord provided. Copy Guard Protection: If a DVD player audio/video output is plugged into the A/V input jacks of a Video Cassette Recorder (VCR) using audio/video cables, (red, white and yellow RCA jacks) poor picture quality may result (i.e. screen on TV getting brighter and dimmer) due to Macrovision copy guard protection contained on some DVD discs. 9 CONTROLS AND INDICATORS (CONTINUED) REAR PANEL ! 1 Infrared (IR) INPUT Connector (3.5mm jack) This connector provides a three-wire interface with receiver accessory. Remove the sticker to use receiver accessory (remote eye).(P/N 136-2070) @ 2 Infrared (IR) INPUT Connector This connector provides a two-wire interface with various Audiovox IR products such as VOH-681/682. 10 # Channel Selection Switch For RF Modulator Set to channel 3 or 4, whichever channel is not active in your area. $ ANT. IN Connector Connect the TV antenna (or cable if available - home use) to this connector. CONTROLS AND INDICATORS (CONTINUED) % AUDIO/VIDEO OUT Connectors These connectors provide an interface to the AUDIO/using an RCA cord. ^ & DC 12V Jack When using a DC power source, connect this jack to 12V * Connector description for & * RF OUT Connector This connector provides an interface to the antenna input connector terminal Tune the television to channel 3 or 4 to watch video tapes. ( AUDIO/VIDEO IN Connector These connectors provide an interface to the AUDIO/VIDEO OUT connectors of your cord. Copy Guard Protection: If a DVD player audio/video output is plugged into the A/V input jacks of a Video Cassette Recorder (red, white and yellow RCA jacks) poor picture quality may result (i.e. screen on TV getting brighter copy guard protection contained on some DVD discs. CAUTION: This VCP is for 12Vdc use only; DO NOT use in 24Vdc vehicles. If you use this unit in a 24Vdc vehicle, all the indicator lamps will blink indicating a major malfunction. Disconnect the plug from the power source immediately...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien