Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Bosch Dateigröße: 574.54 kb Dateiname: Unterrichtssprache:

The active carbon filter is arranged before the motor housing and is mounted with the knurled screw. 5. Re-insert the fuses and reconnect the appliance. Your fume extractor hood is now ready to operate in return air mode again! Changing the fluorescent lamp (starter) You can change the fluorescent lamp or starter yourself! De-energize the appliance before changing the lamp (e.g. pull out the mains plug). 1. Slide the lighting cover to the right (860 D) or unclip and detach it (8609 D). 2. Unscrew my defective fluorescent lamp by twisting out of the sockets to the left and replace it with a new one. Important: Insert only a max. 15 W (860 D) or 16 W (8609 D) fluorescent lamp by twisting into the sockets to the right! WLW4 5/90 GB/EU WLW4 5/90 - WR1 11/89 GB/EU 3. Remove any defective starter by twisting out of the socket to the left. Insert a new starter by twisting to the right. 4. Reclose my lamp cover. Re-insert the fuses and reconnect the appliance. Important! To clean the fume extractor hood, de-energize the appliance (e.g. pull out the mains plug). Never introduce sharp objects into the protective grille of the motor! Clean the outer parts with a mild washing-up liquid solution. Never use abrasive cleaners, brushes, or scouring agents. Clean the control panel screen and fat filter grille only with a damp cloth and mild washing-up liquid solution. It is important to observe the filter change or cleaning intervals. Failure to observe these intervals may cause the risk of fire through fat deposition. Cleaning 47 Special accessories Active carbon filter KL 600 (2 units) Wall box MKZ (External dimensions Opening Exhaust air hose 125 mm dia., aluminium E-No. 610 899 470 E-No. 610 899 004 Height x width in mm 250 x 220 185x210) E-No. 610 899 008 Customer service In case of any enquiries and faults, please call our service centre (see list of service centres). When calling, please state the following: 1. The model designation 2. The E-No. 3. The F-No. You will find these data on the nameplate after opening the fat filter grille inside the appliance. In the interests of technical progress, the manufacturer reserves the right to make design and colour alterations without prior notice....

Herunterladen

Geben Sie zwei Ziffern: