Login:
heruntergeladen wurde: 0   Dateigröße: 328 kb   Hersteller: Precor  
Kategorie: Fahrräder
@name

.......... 4 Unpacking the Equipment ........................................................................................................ ... 4 Important Safety Instructions .................................................................................................. .... 4 2 2 Preparations..................................................................................................... 5 Required Tools..................................................................................

heruntergeladen wurde: 51   Dateigröße: 471 kb   Hersteller: Precor  
Kategorie: Fahrräder
@name

Required Tools Obtain these tools before assembly: • Standard hex key set • Standard socket set • .-inch box wrench or crescent wrench • Flat head screwdriver • Phillips-head screwdriver • Needle-nose pliers • Standard torque wrench Installation Requirements Review these installation requirements before assembly: • The Cardio Theater Integrated Bracket is built to VESA MIS-D, 100/75 standard interface specifications. • Provide ample space around the climber. Open space around the unit allows for

heruntergeladen wurde: 6   Dateigröße: 855 kb   Hersteller: Precor  
Kategorie: Fahrräder
@name

Rubber grommet Upright support 17 16 Lower support Base tube 18 20 19 Read CAUTION above Step 18. End cap End cap Coaxial/power cable Preparing the EFX556i page 18 Cardio Theater Integrated Bracket Assembly Instructions 21. Replace the back cover Replace the back cover Fit the lip of the back cover into the tabs along the inside surface of the pressure to the top of the back tighten the screws. 22. Reinstall the front cover and secure it two screws removed in step 2. Before tightening the front

heruntergeladen wurde: 0   Dateigröße: 60 kb   Hersteller: Precor  
Kategorie: Fahrräder
@name

Do not attempt installation on your own as you could void the Precor limited warranty. If you need assistance, please see Obtaining Service in your owner’s manual. Diagram 1 Loosen nut to adjust seat tilt. Seat- Nut- Wrench- Seat Post SEAT ADJUSTMENT On the C846i and C842, you can adjust the seat tilt by taking the following steps: 1. Loosen the nut beneath the seat using a 17 mm (11/i6-inch) box-end wrench or crescent wrench. Refer to Diagram 1. P/N 47563-101 February 27, 2004 Diagram

heruntergeladen wurde: 7   Dateigröße: 5 mb   Hersteller: Precor  
Kategorie: Fahrräder
@name

• to ensure the proper use and safety of the unit, make sure that all users read this manual. Please make this manual a part of your club’s training program. Remind the club users that before beginning any fitness program, they should obtain a complete physical examination from their physician. Il est conseille de subir un examen medical complet avant d’entre-prendre tout programme d’exercise. Si vous avez des etourdissements ou des faiblesses, arretez les exercices immediatement. To reduce the

heruntergeladen wurde: 2   Dateigröße: 60 kb   Hersteller: Precor  
Kategorie: Fahrräder
@name

The owner’s manual uses the words course and course selection, while the labels display programs and program selection. To lessen confusion, please remember that wherever you come across the word “course” in the owner’s manual, you need to replace it with the word “program.” OPTIONAL POWER ADAPTER With the C842 or C846i product, if you choose to purchase the optional power adapter, you must also purchase the internal cable kit. This kit supplies a cable, bracket and fasteners that allow the po





Kategorien