Stimmen - 5, Durchschnittliche Bewertung: 3.6
(
)
)
|
Anleitung Zusammenfassung
Pat. Nos. 4633216/4636769/4642606/5236759 and Design Pat. Pending Copyright© 2005 CATEYE Co., Ltd. CCMC1W-050610 066600370 3 SENSOR ZONE A 2 3 B 5 mm 3 2 3 2 6 2 5 SENSOR ZONE or 1 2 3 1 4 1 7 8 1 8 1 7 1 3 2 Max. Distance 70 cm 1 2 3 7 8 6 5 4 CC-MC100W MICRO Wireless ENG 2 SET UP BEFORE USE (SETTINGS) OPERATION FLOW MENU FLOW BATTERY DATA RESET TIRE Tire size 26 x 1 - 3/8 12 x 1.75 14 x 1.50 14 x 1.75 16 x 1.50 16 x 1.75 18 x 1.50 18 x 1.75 20 x 1.75 20 x 1-3/8 22 x 1-3/8 22 x 1-1/2 24 x 1 24 x 3/4 Tubular 24 x 1-1/8 24 x 1-1/4 24 x 1.75 24 x 2.00 24 x 2.125 26 x 7/8 26 x 1(59) 26 x 1(65) 26 x 1.25 26 x 1-1/8 26 x 1-3/8 26 x 1-1/2 26 x 1.40 26 x 1.50 26 x 1.75 26 x 1.95 26 x 2.00 26 x 2.10 26 x 2.125 26 x 2.35 26 x 3.00 27 x 1 27 x 1-1/8 27 x 1-1/4 27 x 1-3/8 650 x 35A 650 x 38A 650 x 38B 700 x 18C 700 x 19C 700 x 20C 700 x 23C 700 x 25C 700 x 28C 700 x 30C 700 x 32C 700C Tubular 700 x 35C 700 x 38C 700 x 40C 935 1020 1055 1185 1195 1340 1350 1515 1615 1770 1785 1753 1785 1795 1905 1890 1925 1965 1920 1913 1952 1953 1970 2068 2100 2005 2010 2023 2050 2055 2068 2070 2083 2170 2145 2155 2161 2169 2090 2125 2105 2070 2080 2086 2096 2105 2136 2170 2155 2130 2168 2180 2200 47-305 47-406 47-507 23-571 37-590 40-559 47-559 50-559 54-559 57-559 57-559 32-630 18-622 20-622 23-622 25-622 28-622 32-622 37-622 40-522 ETRTO Tire size L (mm) ETRTO Tire size L (mm) ETRTO Tire size L (mm) Tire size 6 (59) 26 x 1(65) 26 x 1.25 26 x 1-1/8 26 x 1-3/8 26 x 1-1/2 9 3 1952 1953 1970 2068 2100 3 5 37-590 Input Current Speed 0.0 (4.0) - 105.9 km/h [0.0 (3.0) - 65.9 mph] 0.0 (3.0) - 105.9 km/h [0.0 (2.3) - 65.9 mph] Main Sub Tm 0:00'00" - 9:59'59" Tm 2 0:00'00" - 9:59'59" Dst 2 0.00 - 999.99 km [mile] Av 2 0.0 - 105.9 km/h [0.0 - 65.9 mph] Dst 0.00 - 999.99 km [mile] Av 0.0 - 105.9 km/h [0.0 - 65.9 mph] Mx 0.0(4.0) - 105.9 km/h [0.0(3.0) - 65.9 mph] Odo 0.0 - 9999.9 10000 - 99999 km [mile] 2 Clock Setting or ON / OFF Setting or L mm (Trip Distance) (Elapsed Time) (Average Speed) (Trip Distance 2) (Elapsed Time 2) (Average Speed 2) (Maximum Speed) (Total Distance) (Clock) COIN 1. All Clear PUSH! 2. Select km/h or mph 3. Wheel Circumference MODE MODE MODE MODE MODE MODE MODE MODE MODE Tm Dst Av Mx 0 0 START/STOP MODE START/STOP MODE MODE 2 sec 0:00 - 23:59 [1:00 - 12:59] START MENU SETTING END START/STOP START/STOP START/STOP START/STOP START/STOP START/STOP START/STOP START/STOP 00000 - 99999 km [mile] (0100 - 3999 mm) (0 - 9) MODE MODE MODE MENU SET MENU SET MENU SET MENU SET MENU SET Tm 2 Dst 2 Av 2 Tm Dst Av Mx Odo Tm 2 Dst 2 Av 2 0 MENU SET MENU SETTING END AC a c b SET : L = 2068 (mm) D I E START/STOP MODE AC MENU B A C J CR2032 Open Close J CR2032 Open Close All Clear COMPUTER Main Sub SENSOR a d e 00 - 59 START/STOP MODE MODE START/STOP MODE START/STOP MODE MODE MODE START/STOP MODE (0100 - 3999 mm) START 2096 2097 START km/h 2098 2068 24 hr / 12 hr 0 - 24 / 1 - 12 COIN MODE START/STOP SET : km/h 2 ! H G F MODE MODE MODE MODE MODE MODE START/STOP START/STOP MENU c d SET ! DATA RESET Main Sub Main & Sub YES NO Return to Main/Sub measurement = 0 MENU SETTINGS CAUTION • Do not concentrate on the computer while riding. Be sure to ride safely! • Install the magnet, sensor, and bracket securely. Check these periodically. • Dispose of used batteries according to local regulations. If swallowed, consult a doctor immediately. •Avoid having the computer in hot direct sunlight for extended periods. • Do not disassemble the computer. • Clean the computer and accessories with a soft cloth dampened with a neutral detergent. Do not use thinners, benzene, or alcohol on the computer. Wireless Sensor The sensor was designed to receive signals within a limited range to prevent sensor signal interference. Thus, the sensor and computer must be relatively close. If the temperature or battery power is low, they may need to be even closer than normal. The sensor must be installed at the top of the fork, and the distance between the sensor and the computer should not exceed approximately 70 cm. Install the computer on the stem, with its bottom surface facing the sensor. (Take into account the angle of the stem.) Interference may occur, resulting in malfunction, if the computer is: • Near a TV, PC, radio, motor, or in a car or train. • Close to a railroad crossing, railway tracks, TV stations and or radar base. • Close to a second bicycle with wireless sensors. Correct installation of sensor and magnet A Attach the magnet 3 so that it passes through the sensor zone of the sensor 2. B Be sure to have a 5 mm-or-less clearance between the sensor 2 and magnet 3. Part names A B C D EF G Current Speed Sensor signal reception icon Flashes in sync with sensor signals. Sub measurement icon Pace arrow Indicates whether the current speed is faster or slower than the average speed. ( Faster Slower) Auto mode icon Speed unit Mode symbol .................................................................... b Indicates the mode currently selected. Tm (Tm 2) ..........