Stimmen - 5, Durchschnittliche Bewertung: 3.2 ( )

Hersteller: GE Dateigröße: 2.42 mb Dateiname: Unterrichtssprache:

Keeping the burner ports clean will prevent improper ignition and an uneven flame. See instructions below. To Clean the Burner Grates Be sure burners and grates are cool before you place your hand, a potholder, cleaning cloths or other material on them. The cast iron burner grates can be washed in hot soapy water. Rinse thoroughly and dry the grates with a cloth; don't put them on the cooktop while still wet. Be sure the grates are positioned securely over the burners. To remove burned on food, place the grates in a covered container or plastic bag. Add 1/ Burner grate can appear in 4 cup ammonia and soak for 30 minutes. Wash, rinse well and dry. An abrasive cleaner different shapes. can be used for stubborn stains. To Clean the Contoured Burner Skirts (some models) Except for the dual burner, the burner skirts are attached to the cooktop and are not removable. The burner skirts forms a recessed well area located around each burner unit. If spill occurs inone of the well areas, turn off burner and blot up spill with an absorbent cloth. Rinse with a clean, damp cloth and wipe dry. Burner Cap To Clean the Burner Cap Remove burner cap. Use soap-filled pad or mild abrasive cleanser to clean burner caps. If necessary, cover stubborn spots with an ammonia- soaked paper towel for 30 minutes. Rub gently with a mixture of clean water and vinegar. Wipe dry. Remove all cleaners or the porcelain may become damaged during future heating. To Clean the Removable Burner Head and Gas Opening (some models) The ports (or slots) around the burner head must be routinely cleaned. Use a small-gauge wire or needle to clean small slots or holes. Note: Ifthe electrode isdamaged or broken, the surface burner will not light because it will not spark. Manual lighting with a match is still possible. Burner Skirt (some models For proper flow of gas and ignition of the burner-DO NOT ALLOW SPILLS, FOOD, CLEANING AGENTS OR ANY OTHER MATERIAL TO ENTER THE GAS OPENING TUBE. Gas must flow freely through the small hole in the brass orifice for the burners to light properly. If the gas Sealed Burner opening orifice becomes soiled or clogged, use a small-gauge or needle to clean. ALWAYS keep the burner cap in place whenever a surface burner is in use. To Replace the Burner Head and the Burner Cap Make sure the pieces are thoroughly dry before placing back. 1. Replace burner head and burner cap in their places. Make sure each burner cap and burner head are properly aligned and leveled. 2. Replace the burner grate. 3. Turn the burner on to determine if it lights. If the burner does not light after cleaning, contact Sears or another authorized servicer. Do not service the sealed burner yourself. 13 Before You Call Solutions to Common Problems Before you call for service, review this list. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. OCCURRENCE POSSIBLE CAUSE/SOL...

Herunterladen

Geben Sie zwei Ziffern: