Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Jenn-Air Dateigröße: 156.43 kb Dateiname: Unterrichtssprache:

361/4" max. 4"x 8" opening to route armoured cable 36" 13" max. cabinet depth 345/8"191/16" 51/4" 3/4" CL Overall depth at center of arc – 213/4" 363/4" 211/2" 25/8" 18" min. 30" min. for unprotected cabinet 24" min. for protected surface Induction Hybrid Cooktops EW36CC55G S, EW36CC55G W, EW36CC55G B 24" 21/2" min. from edge of cutout to front edge of countertop 6" min. 25"min. 7 1/2" min. to nearest combustible wall (either side of unit) 10" 12" 2" min. recommended distance between rear edge of cutout and nearest combustible surface above countertop 203/8" min. 201/2" max. Approximate location of junction box 36" min. 361/4" max. 4"x 8" opening to route armoured cable 36" 13" max. cabinet depth 345/8"191/16" 51/4" 3/4" CL Overall depth at center of arc – 213/4" 363/4" 211/2" 25/8" 18" min. 30" min. for unprotected cabinet 24" min. for protected surface 36" Induction Hybrid Drop-In Cooktop Specifications • Product Weight – 62 Lbs. • Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz, fused on both sides of line with ground. • Connected Load (kW Rating) @ 240/208 Volts = 9.9/8.4kW • Amps @ 240/208 Volts = 41.3/40.4 Amps • Recommended Circuit Breaker – 40 Amps • Always consult local and/or national electric codes. • Allow 2"space below armoured cable opening to clear electrical cable and allow space for installation of junction box on wall at back of cooktop. • Overhead cabinetry should not exceed a 13" maximum depth. • Allow 30" minimum clearance between top of cooktop and bottom of unprotected wood or metal overhead cabinetry. • Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance. • Allow 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. • Allow 2" minimum clearance between rear edge of cutout and nearest combustible surface above countertop. • Allow 7-1/2" minimum clearance from edge of cooktop to nearest combustible wall on either side of unit. • It is recommended that drawers not be used beneath cooktop. • To reduce risk of fire when using overhead cabinetry, install range hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets. • Induction Hybrid Drop-In Cooktop model EW36CC55G is approved to be used over any Electrolux Single Wall Oven. Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxappliances.com for detailed instructions. High standards of quality at Electrolux Major Appliances mean we are USA • 250 Bobby Jones Expressway • Augusta, GA 30907 • 1-877-4electrolux (1-877-435-3287) • electroluxappliances.com constantly working to improve our products. We reserve the right to change CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • electroluxapplianc...

Herunterladen

Geben Sie zwei Ziffern: