Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Dacor Dateigröße: 337.63 kb Dateiname: Unterrichtssprache:

To turn an element off, tap the “ON/OFF” key. You may turn off all active elements at the same time by tapping twice on the Dacor logo located below the controls. ETT Secure Lockout To avoid accidentally turning the cooktop on while cleaning it, activate the “Secure Lockout” feature. To lock out the cooktop: Press and hold the DACOR logo for 3-4 seconds and the cooktop will be secured from use. You will hear three beeps and a light will illuminate directly above the DACOR logo indicating that the cooktop is secure. The control panel is now disabled and may be cleaned without activating any functions. To unlock the cooktop: Press and hold the DACOR logo for 3-4 seconds. You will hear three beeps and the light will go out. The control panel is now ready for use. NOTES: 1. For maximum safety, the cooktop will be in the “lock out” mode when first installed, or whenever power is interrupted. Follow the “Unlock” instructions above to reactivate the control panel. 2. To turn off multiple burners all at one time - tap the Dacor logo twice. 61/2" 1200W73/4" 1800W51/2" 1000W7" 1500W93/4" 2400W 7" 1500w73/4" 1800w9" 2100w61/2" 1200w93/4" 2400w51/2" 1000w Model ETT365 Top View Model ETT304 Top View CER 304 Model Push down and turn the knob to the desired temperature setting. The control knobs can be turned either clockwise or counterclockwise to the desired temperature setting. The knob that controls the Dual Element may be pushed down and turned counter-clockwise to heat the single inner element or clockwise to heat both the inner and outer elements. All knobs may be positioned below setting #1 to achieve the lowest temperatures possible. OFF121110987654321OFF121110987654321OFF121110987654321OFF121110987654321OFF1211109876543216" 1500W7" 1800W800W7" 1800W51/2" 1200W51/2" 1000W9" 2400W OFF121110987654321OFF121110987654321OFF121110987654321OFF1211109876543217" 1800W51/2" 1000W51/2" 1000W71/2" 2000W9" 2200W Figure 7: Model CERB365 Top View Model CER304 Top View NOTE: (CER models only) The Element ON Indicators are located below each knob. (Continued) Setting the Controls Bridge Burner Your CERB electric cooktop offers a new unique cooking feature. The bridge burner has controlled heat zones allowing various pot and pan applications on this three-in-one burner. The bridge burner has three cooking zones identified by the lines on the right side of the cooktop. Each zone has a separate heating element. In the front of the bridge is a round element seven inches in diameter that is rated at 1800 watts. This front element of the bridge burner is individually controlled for use with a pot or pan as large as eight inches in diameter. The back burner area of the bridge burner, also a round element seven inches in diameter, is rated 1800 watts makes this another great individual burner for a pot as large as eight inches in diameter. In the center of the bridge burner is a bridge element rated at 800 watts, which operates in conjunction with the back burner element. A single control knob operates the back burner element and the bridge element. So to turn on the entire bridge element to a setting of medium, push and turn the right rear knob clockwise to number 6. Then push and turn the right front knob to number 6. Note: Ask your dealer about the DACOR AMG11 Griddle. This Griddle is designed for the DACOR bridge burner. .............................................................................................................................. .................................................................................................................... Bridge Burner Control Switch Selecting Proper Cookware For best results, a few simple guidelines should be followed: use medium to heavy gauge metal cookware with flat, thick and smooth bottoms for greatest efficiency. Glass cookware should only be used as recommended by the cookware manufacturer. IMPORTANT: In no instance should a support, such as a wok ring or trivet, be placed directly on the cooking surface. This may result in scratching of the glass ceramic top. WARNING: To avoid electrical shock or burns, turn off all controls and ensure the cooktop is cool before cleaning. IMPORTANT: Do not use harsh or abrasive cleaning agents, waxes, polishes, or commercial cooktop cleaners to clean the cooktop. Care & Cleaning Instructions Glass Ceramic Top Clean the top surface thoroughly before operating the cooktop for the first time. Apply about 1/4 teaspoon of non-abrasive cleaner, such as the Cooktop Cleaning Creme supplied, to the surface of the ceramic glass with a lightly dampened clean cloth. Use a second clean cloth to remove any remaining cleaner residue. Wipe the cooktop surface with a dry cloth to completely eliminate any remaining moisture. The cooktop surface should be maintained by repeating the above procedure during or after each use. Be careful not to wipe or clean any hot areas to avoid personal injury. It should be safe to clean each element area whenever the cor...

Herunterladen

Geben Sie zwei Ziffern: