Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Secure the power supply cable by fastening the cable clamp screw, then put the cover back on. Phase Phase Phase Three-phase 400 Earth Neutral U-bolt connection support Connecting the electricity supply cable to the mains If the appliance is being connected directly to the electricity mains an omnipolar switch must be installed with a minimum opening of 3 mm between contacts. ! The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations. Before connecting the appliance to the power supply, make sure that: • The appliance is earthed and the plug is compliant with the law. • The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the appliance itself. • The voltage falls within the range of values indicated on the data plate. • The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets. ! Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible. ! The cable must not be bent or compressed. ! The cable must be checked regularly and replaced by authorised technicians only. ! The manufacturer declines any liability should these safety measures not be observed. ! Do not remove or replace the power supply cable for any reason. Its removal or replacement will void the warranty and the CE marking. INDESIT does not assume liability for accidents or damage arising from replacement/removal of the original power supply cable. Replacement can only be accepted when carried out by personnel authorised by INDESIT and using an original spare part. 4 Description of the appliance H Hotpoint Control panel The control panel described in this manual is only a representative example: it may not exactly match the panel on your appliance. GB COOKING ZONE PROGRAMMED indicator light POWER and RESIDUAL HEAT Indicators COOKING ZONE — SELECTOR buttons COOKING ZONE SELECTED indicator light PROGRAMME TIMER display INCREASE TIME button ON/OFF button COOKING ZONE POWER SELECTOR buttons TIMER Indicator light 8. 8. . 8. 8. .. uz: dU ss © 88 mu) 1- «+1 CD-- □ □□ ^ 5J gi7iga ON/OFF indicator light CONTROLS LOCKED Indicator light CONTROL PANEL PROGRAMME L0CK button TIMER button DECREASE TIME button • INCREASE TIME button increases the time value set on the timer (see Start-up and use). • DECREASE TIME button decreases the time value set on the timer (see Start-up and use). • COOKING ZONE SELECTOR button shows a particular cooking zone has been selected and therefore various adjustments are possible. • COOKING ZONE SELECTOR button is used to select the desired cooking zone. • POWER indicator provides a visual display for the current heat level. • ON/OFF button switches the appliance on and off. • ON/OFF indicator light shows whether the appliance is on or off. • PROGRAMME TIMER button controls the cooking programme times (see Start-up and use). • PROGRAMME TIMER display shows which programme has been selected (see Start-up and use). • COOKING ZONE PROGRAMMED indicator lights show which cooking zones are being used during a cooking programme (see Start-up and use). • CONTROL PANEL LOCK button prevents accidental changes to the hob settings (see Startup and use). • CONTROL PANEL LOCK indicator light shows the control panel has been locked (see Start-up and use). • COOKING ZONE POWER SELECTOR buttons switch on the hotplate and control the power (see Start-up and use). • TIMER indicator light shows that the timer has been activated 5 GB Extendable cooking zones Certain models are fitted with extendable cooking zones. These may be circular or oval and may vary in their extensibility (they may be double or triple hotplates). A list of controls is given below (these controls are only present in models with the extendable cooking zone option). Circular extendable hotplate 0. • o oo DOUBLE HOTPLATE ON indicator light DOUBLE HOTPLATE ON button Oval extendable hotplate OVAL HOTPLATE ON indicator light S. . HHID OVAL PLATE ON button DOUBLE HOTPLATE ON button switches on the double hotplate (see Start-up and use). DOUBLE HOTPLATE ON indicator light shows the double hotplate has been switched on. OVAL HOTPLATE ON button switches on the oval hotplate (see Start-up and use). OVAL HOTPLATE ON indicator light shows the oval hotplate has been switched on. 6 Start-up and use H Hotpoint ! The glue applied on the gaskets leaves traces of grease on the glass. Before using the appliance, we recommend you remove these with a special nonabrasive cleaning product. During the first few hours of use there may be a smell of rubber which will disappear very quickly. ! A few seconds after the hob is connected to the electricity supply, a buzzer will sound. The hob may now be sw...
Dieses Handbuch ist für folgende Modelle:Kochfelder - CRO 742 DO B (441.19 kb)