CAuTION: safety auto off is designed as a safety feature only. Irons should not be left switched on deliberately while unattended. If safety auto off has activated and no further ironing is required, we recommend that the iron is switched off at the power outlet and unplugged. After Each Use Set the steam selector to the DRY position and turn the Temperature Control to MIN. Switch the power off at the power outlet and disconnect the power cord from the power outlet. Open the water filling cap an

Iron fabrics that require the lowest temperatures first. Work through to the fabrics requiring higher temperatures. Both the Temperature Control and most items of laundry have markings corresponding with this code (see Table A). Stand the iron on its heel and turn the Temperature Control to MIN. Plug the power cord into a 230V or 240V power outlet and switch on. Select the temperature setting required by rotating the Temperature Control dial so that the desired setting is aligned with the Temper

• Set the steam selector to the DRY position. • Fill the water tank up to the maximum level (MAX) with the water cup supplied. • Set the Temperature Control to MAX (Linen) setting. • Place the iron in the upright position, insert the plug into the power outlet and switch the iron on. • Allow the iron to heat until the heating indicator light turns off. • Switch the iron off at the power outlet and remove the plug. • Hold the iron horizontally over the sink. • Press and hold the SELF CLEAN button

Long textile cord with 360° cord outlet for better reach and more flexibility: •3metre(KI760,KI760Pand KI780 only) •2.5metre(KI730only) 12. Heating indicator light: Illuminates when the iron is heating to the selected temperature Not Shown • Auto-Off protection (KI780 only): To switch the iron off when it has been left unattended • Vertical shot of steam: Removes creases and freshens hanging curtains and clothes. Ideal for delicate fabrics which require steam only • Anti-drip system: Stops water

The spray can also be used with delicate fabrics (synthetic) which are ironed at low temperatures and therefore cannot be steam ironed. NOTE: If the spray function is operated during dry ironing, ensure that there is sufficient water in the water tank. If dry ironing for more than 20 minutes, the water tank should be emptied to prevent over heating any water present. Anti Drip System The Kambrook Steamline iron is equipped with an Anti-Drip System. The iron will automatically close the steam val

NOTE: If the spray function is operated during dry ironing, ensure that there is sufficient water in the water tank. If dry ironing for more than 20 minutes, the water tank should be emptied to prevent over heating any water present. Anti Drip System The Kambrook Steamline iron is equipped with an Anti-Drip System. The iron will automatically close the steam valve when the soleplate temperature is too low to produce steam. When this happens you will hear a click sound. It is safe and will not ha

In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 09 271 3980 (New Zealand). Alternatively, visit us on our website at KI730_KI760_KI760P_KI780_IB_FA.indd 2 19/01/10 3:40 PM Contents Kambrook Recommends p4 Safety First Your Kambrook Steamline Iron p6 Operating Instructions p7 How To Use Shot Of Steam p10 Care and Cleaning p12 Warranty Details p16 KI730_KI760_KI760P_KI780_IB_FA.indd 3 19/01/10 3:4

Do not use harsh or abrasive cleaners as they may damage the surface of the iron. Never immerse the iron in water or any other liquid. KI730_KI760_KI760P_KI780_IB_FA.indd 13 19/01/10 3:40 PM 14 Notes KI730_KI760_KI760P_KI780_IB_FA.indd 14 19/01/10 3:40 PM Notes KI730_KI760_KI760P_KI780_IB_FA.indd 14 19/01/10 3:40 PM 15 Notes KI730_KI760_KI760P_KI780_IB_FA.indd 15 19/01/10 3:40 PM Notes KI730_KI760_KI760P_KI780_IB_FA.indd 15 19/01/10 3:40 PM Kambrook 12 Month Replacement Warranty Kambrook 12 Mont

Set the Temperature Control to the required position within the steam range and wait until the Heating Indicator Light has gone out. Set the Steam Control (on top of the handle) to the required setting. Your Kambrook iron is now ready for use. IMpORTANT: If the iron is set to a low temperature on the Temperature Control (i.e. synthetic or silk) and also on any of the steam control settings, there may be leakage from the soleplate. This is due to the iron temperature not being high enough to vapo

There is no need for concern. Setting the Temperature Before commencing ironing, first sort the items to be ironed according to the International Textile Care Labelling Code or by the type of fabric. Iron fabrics that require the lowest temperatures first. Work through to the fabrics requiring higher temperatures. Both the Temperature Control and most items of laundry have markings corresponding with this code (see Table A). KI400_KI460KM IB v1.indd 7 7 23/12/09 10:43 AM 8 Operating Instructions