Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Kambrook Dateigröße: 2.02 mb Dateiname: Unterrichtssprache:

The spray can also be used with delicate fabrics (synthetic) which are ironed at low temperatures and therefore cannot be steam ironed. NOTE: If the spray function is operated during dry ironing, ensure that there is sufficient water in the water tank. If dry ironing for more than 20 minutes, the water tank should be emptied to prevent over heating any water present. Anti Drip System The Kambrook Steamline iron is equipped with an Anti-Drip System. The iron will automatically close the steam valve when the soleplate temperature is too low to produce steam. When this happens you will hear a click sound. It is safe and will not harm the performance of the iron. This is the reason the fine mist spray should be used when ironing delicate fabrics at low temperatures. The steam valve will open once the soleplate has reached the temperature required to create steam. KI730_KI760_KI760P_KI780_IB_FA.indd 10 19/01/10 3:40 PM 11 Safety Auto-Off (KI780 Only) The Safety Auto Off feature is designed to switch the iron off if forgotten. When the iron is left in the upright position it will shut off in approximately 8 minutes, followed by six beeps. Fig. 1 When left in the ironing position it will switch off in approximately 30 seconds, followed by six beeps. Fig. 2 Once the iron has shut itself off, the indicator light will blink to indicate that the iron has switched off. To reactivate the iron, simply move the iron. The heating indicator light will switch on when the iron has reached the temperature selected on the temperature dial. CAuTION: safety auto off is designed as a safety feature only. Irons should not be left switched on deliberately while unattended. If safety auto off has activated and no further ironing is required, we recommend that the iron is switched off at the power outlet and unplugged. After Each Use Set the steam selector to the DRY position and turn the Temperature Control to MIN. Switch the power off at the power outlet and disconnect the power cord from the power outlet. Open the water filling cap and (over a sink or bucket) invert the iron to empty the remaining water from the tank. Stand the iron in an upright position and allow to cool. KI730_KI760_KI760P_KI780_IB_FA.indd 11 19/01/10 3:40 PM Fig. 1 When left in the ironing position it will switch off in approximately 30 seconds, followed by six beeps. Fig. 2 Once the iron has shut itself off, the indicator light will blink to indicate that the iron has switched off. To reactivate the iron, simply move the iron. The heating indicator light will switch on when the iron has reached the temperature selected on the temperature dial. CAuTION: safety auto off is designed as a safety feature only. Irons should not be left switched on deliberately while unattended. If safety auto off has activated and no further ironing is required, we recommend that the iron is switched off at the power outlet and unplugged. After Each Use Set the steam selector to the DRY position and turn the Temperature Control to MIN. Switch the power off at the power outlet and disconnect the power cord from the power outlet. Open the water filling cap and (over a sink or bucket) invert the iron to empty the remaining water from the tank. Stand the iron in an upright position and allow to cool. KI730_KI760_KI760P_KI780_IB_FA.indd 11 19/01/10 3:40 PM 12 Care and Cleaning To ensure your iron maintains optimum performance it is recommended that it be cleaned using the Self-Clean function to remove scale or impurities. • Set the steam selector to the DRY position. • Fill the water tank up to the maximum level (MAX) with the water cup supplied. • Set the Temperature Control to MAX (Linen) setting. • Place the ir...

Herunterladen

Geben Sie zwei Ziffern: