Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
During use, the no drip system may emit a loud click, particularly during heat-up or whilst cooling down. This is perfectly normal and indicates that the system is functioning correctly. Emptying and Storing When you have finished ironing, unplug your iron. Ensure that the variable steam control is set at the “0” position, remove the fill cap and empty any remaining water out of the filling hole G. Do not store in the box, but in an upright position H, so that any drops of water remaining cannot leak out and discolour the soleplate. IMPORTANT: The flex can be damaged if wound too tightly around the iron after use. Make a loose loop with the flex and wrap it around the iron. The iron must be cool before winding the flex and storing on it’s heel. MAINTENANCE To clean a stainless steel soleplate (certain models only) To keep the soleplate of your iron clean and free of limescale, we recommend that you use one of the gentle chrome, silver or stainless steel cleaners that are generally available. Always follow the manufacturer’s instructions. To clean off melted man-made fibres, set the iron at the 3 dot position and pass it over a clean piece of cotton which will draw the deposit off the surface. To clean a coated soleplate (certain models only) In the unlikely event of any man-made fibre fusing to the soleplate, set the iron at the 3 dot position and pass it over a clean piece of cotton which will draw the deposit off the surface. Do not use scouring powder or solution as this could cause damage to the coating. To clean an aluminium soleplate (certain models only) To keep the soleplate clean and free of limescale, make a paste of mild scouring powder and a little water. Apply a small amount to the soleplate, rub and then remove with a damp cloth. Wipe thoroughly with a clean cloth. To clean the exterior Allow the iron to cool and wipe over with a damp cloth and mild detergent, then wipe with a dry cloth. 6 UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119 40513 rev1:RN40513 MUK Rev1 18/02/2009 11:16 Page 7 HELPLINE If you have any difficulty with your appliance, do not hesitate to call us. We are more likely to be able to help than the store from where you bought it. Please have the following information ready to enable our staff to deal with your query quickly: • Name of the product. • Model number as shown on the underside of the appliance. • Serial number as shown on underside of the appliance. UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119 WEBSITE You may also contact us through our website, or visit the site to browse and purchase appliances, spare parts and accessories from the extensive Morphy Richards range. 7For details of other Morphy Richards products, please see our website: 40513 rev1:RN40513 MUK Rev1 18/02/2009 11:16 Page 8 YOUR TWO YEAR GUARANTEE If, for any reason, this item is replaced during the 2 year It is important to retain the retailer’s receipt as proof of purchase. Staple your receipt to this back cover for future reference. guarantee period, the guarantee on the new item will be calculated from original purchase date. Therefore, it is vital to retain your original till receipt or Please quote the following information if the product invoice to indicate the date of initial purchase. develops a fault. These numbers can be found on the To qualify for the 2 year guarantee, the appliance base of the product. must have been used Model no. according to the manufacturer’s instructions. Serial no. For example, kettles should have been regularly All Morphy Richards products descaled. are individually tested before leaving the factory. In the unlikely event of any appliance proving to be faulty EXCLUSIONS Morphy Richards shall not be within 28 days of purchase, it should be returned to the place of purchase for it to be liable to replace or repair the goods under the terms of the guarantee where: replaced. 1 The fault has been caused or If the fault develops after 28 is attributable to accidental days and within 24 months of use, misuse, negligent use or original purchase, you should contact the Helpline number used contrary to the manufacturer’s quoting Model number and recommendations, or where Serial number on the product, or write to Morphy the fault has been caused by power surges or damage Richards at the address caused in transit. shown. You may be asked to return a copy of proof of 2 The appliance has been used purchase. on a voltage supply other Subject to the exclusions set than that stamped on the products. out below (see ‘Exclusions’), the faulty appliance will then be repaired or replaced and dispatched usually within 7 3 Repairs have been attempted by persons other than our service staff (or authorised working days of receipt. dealer). Morphy Richards products are intended for household use only. Morphy Richards has a policy of continuous improvement in product quality and design. The company, therefore ...