Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
2Л/ег. 8/Ver. 9* 64 kbps-192 kbps No 32, 44.1,48 kHz * WMApro, Loss-less: Not available 64 kbps at 48 kHz: Not available Copyright: It is prohibited by copyright laws to copy, distribute and deliver copyrighted materials such as music without the approval of copyright holder except enjoying yourself personally. No warranty: Above description complies with our investigations as of December 2003. It has no warranty for reproducibility and displayability of MP3/WMA. CQ-C5400/5300/5100W 35 X сл ^ Turn [VOLUME], M—E Press [VOL a] or [VOL v]. [VOLUME v] 1 [VOLUME a] i/fk i Q V LA-U' lC O [VOLUME A]: Up [VOLUME v]: Down SR5 GdB I [VOLUME a]: Increased ' [VOLUME v]: Decreased Note: • Press [DISP] (display) to return to the regular mode. • If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume setting, 10 seconds in SQ adjustment), the display returns to the regular mode. • The volume can also be adjusted directly using [VOLUME] on the main unit (page 25). ■ To return an adjusted SO to the default setting O Press [SQ] during regular mode, and select the SQ which is to be returned to the default setting. MmF! © Press and hold [BAND] for more than 2 seconds. [VOLUME a]: Increased [VOLUME v]: Decreased SOHZ/+ S (SO adjustment mode) Adjust O Press [<] or [>] to select a frequency. [>]: Increased [<]: Decreased ©Turn [VOLUME] to adjust the equalizer level. [VOLUME a]: Up [VOLUME v]: Down Memorize © Press and hold one of the buttons from [2] to [6] for more than 2 seconds to memorize. • The adjusted SQ is preset in the number of the selected button, and the regular display is restored. Note: • Only buttons [2] to [6] can be used to preset the adjusted SQ. An adjusted SQ cannot be preset in button [1]. • To call a preset SQ, refer to page 27. • While the SQ adjustment mode Is established, only adjustments are performed, and even if the adjustment mode is exited without presetting an adjusted effect, what has been set will be reflected as the current SQ until another SQ is selected. • Even when the SQ presets are adjusted, the display which appears when the settings are called remains unchanged. • The SQ adjustment mode can be established also by pressing [SQ] for more than 2 seconds. CQ-C5400/5300/51OOW ; CO I Audio Settings (continued) COCS*«Mf IWOSi=er SOWiV iX ©™r n\ _2W J,C'' ■ OKffOtaa - MMlffii AUtKW SUM iiAar Press [VOLUME] (SEL: select). SC S£T 5UBJ LEi' suaj lpf HFF 40 Note: • No settings can be performed while “NO DISC” appears on the display. • Press [DISP] (display) to return to the regular mode. Ц Troubleshooting Caution: • Do not use the unit if it malfunctions oir if there is something wrong. • Do not use the unit in abnormal condition, for example, without sound, or with smoke or foul smell, which can cause ignition or electric shock. Immediately stop using it and call the store where you purchased it. repairs. Never try to repair the unit by yourself because it v- Is dangerous to do so. Troubleshooting Tips Common " Problem ) ( Possible cause Possible solution f ^ No power to the unit V -j ► ► ► ► ► The power cord {battery, ACC and ground) Is connected in the wrong way. Check the wiring. Fuse blow out. Eliminate the cause of fuse blow out and replace the fuse with new one. Consult your dealer. f \ The power falls unintentionally V. J The safety device works. \ Call the store where you purchased the unit, or your nearest Panasonic service station. f *\ Sound Is not generated. > j MUTE Is set to ON. Set MUTE to OFF. The wiring of the speaker lines are not correct, or a break or poor contact arises. Check the wiring in accordance with the wiring diagram. / \ The demonstration screen displayed and no operable. V- - You cannot operate the unit while the demonstration screen appears. Press [DISP] (display) to end the demonstration screen. Ifthe demonstration screen appears frequently, there Isa possibility that poor contact or wrong wiring arises between the battery lead of the unit and the battery cable of the car. (The battery lead should be always powered.) Check the battery wiring in accordance with the wiring diagram. J f s\ Some operations are not executable. Some operations are not executable In particular modes such as menu mode. Read the operating instructions carefully and cancel the mode. In case the unit Is still out of order, consult the dealer. 44 CQ-C54 00/53 00/51OOW Immediately switch the power off. Disconnect the power connector and check that there is neither smoke nor heat from the unit before asking for Problem J c Possible cause No sound from speaker(s) The speaker channels are reversed between right and left. ► ► ► ► Possible solution Radio f Problem I c Poor reception or noise The number of auto preset stations are less than 6. Preset stations cannot be stored. ► ► ► There is an electromagnetic-wave generator such as a cellular phone near t...
Dieses Handbuch ist für folgende Modelle:Player - CQ-C5400 (4.41 mb)
Player - CQ-C5100W (4.41 mb)