Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
• Water tank may be empty or water level is very low. Add water. • Make sure that the fabric/temperature setting and the variable steam control are correctly set. For maximum steam, (setting ‘Max’ on steam control), temperature setting should be set on ‘• •• ’. • Variable steam control dial is set on “0”. Always allow the iron to reach the selected temperature with the variable steam control setting at ‘0’. Make sure the temperature setting is set in the correct steam area, e.g. ‘•’, and the steam control is not on ‘0’. For more steam, turn temperature dial to higher setting, e.g. ‘••• ’, and the steam control to ‘Max’. • If temperature setting and steam control setting are correct and there is no steam, gently tap the soleplate on the ironing board a few times. Move the variable steam control from ‘0’ to ‘Max’ a few times. • Iron may not be hot enough. Set temperature to the ‘Max’ position. Always allow iron sufficient time to heat up before activating the variable steam control. • Overuse of steam burst. Allow more time between each burst. • Iron may have been overfilled. Turn iron off,empty water and follow instructions for filling. • Steam performance may be low if iron requires seasoning. To season, use regular tap water for 1or 2 tanks until steam performance improves. 10 When using your iron, basic safety precautions should always be followed, including the following: GETTING TO KNOW YOUR ELECTRONIC IRON Before using your Shark Professional Lightweight Iron, remove any labels, stickers or tags that may be attached to the body or soleplate of the iron. When turned on for the first time, your new iron may emit an odor for up to 10 minutes. This is due to the initial heating of the materials used in making the iron. The odor is safe and should not reoccur after initial heating. Also, before ironing with steam for the first time, allow iron to heat, hold in a horizontal position and hit the burst of steam button several times. The iron may emit some small particles from the steam holes. This is normal and will clear after pressing the burst of steam button several times. 1. Electronic Temperature Control 2. Display Panel 3. Atomizer Spray Button 4. Burst of Steam Button 5. Variable Steam Control 6. Water Inlet Door 7. Spray Nozzle 8. Water Level Window 9. Stainless Steel Soleplate 10. Handle 11. Auto-Shut-Off 12. Power On Light 13. Fabric Settings 14. Temperature & Steam Indicators 15. Water Flask 2 DIRECTIONS ON LABEL FABRIC LED DISPLAY PANEL STEAM CONTROL BURST OF STEAM SPRAY Please note that on the label means ‘THIS ARTICLE CANNOT BE IRONED!” COTTON LINEN SYNTHETIC FIBERS, e.g. acrylic, nylon polyester SILK WOOL MIN • •• •• • MAX 0 MAXIMUM STEAM MINIMUM STEAM 9 IRONING CHART NOTE: Always refer to the garment care tag for ironing instructions. Before starting to iron delicate fabrics, it is best to first test the temperature of the iron on a hem or an inside seam. Technical Specifications Voltage: 120V, 60 Hz Power: 1500 Watts 13 12 8 2 10 1 3 4 5 6 7 9 Illustrations may differ from actual product 14 11 Display Panel FEATURES OF SHARK ELECTRONIC IRON 1 2 3 OPERATING INSTRUCTIONS 8 STORAGE 1. Always turn the variable steam control to “0” after you have emptied the water tank. 2. Allow the iron to cool down. 3. Always store the iron in the upright position to protect the soleplate. 4. From time to time, clean the exterior of the iron with a damp cloth and wipe dry. 5. If you use spray starch, wipe the soleplate occasionally with a soft damp cloth to prevent the build-up of deposits. 6. If the iron has not been used for a few weeks, hold the iron horizontally and allow to steam for 2 minutes before ironing. NOTE: The anti drip function reduces water dripping and water stains. It does not prevent water dripping and water stains if you press the steam burst button too often or if the temperature is too low. The amount of water droplets will eventually decrease after the iron is used for 2 to 3 tankfuls of steaming and ironing. 3 1. BURST OF STEAM BUTTON Burst of steam provides extra, sudden bursts of steam which aid in removing stubborn wrinkles from fabrics such as denim, cotton or linen. 2. ATOMIZER SPRAY BUTTON Pressing this button provides a defined jet of spray which gently moistens fabric. 3. VARIABLE STEAM CONTROL Minimum to maximum steaming for different materials. Self cleaning feature flushes internal sole plate with water. 4. ANTI-DRIP FUNCTION Cuts off water when the iron temperature is too low. LED Display Panel 8. WATER FILLING INLET The cover prevents dust and foreign matter from entering the water tank. It also stops any water from spilling during ironing. 6. STAINLESS STEEL SOLEPLATE Provides maximum glide- ability and heat retention. 5. BUILT-IN ANTI-CALCIUM FILTER Prevents calcium build- up and prolongs the life of the iron. 9. PIVOT CORD For left or right handed use. Pivots up and down; prevents dragging along the fabric. The flexible cord protector protects the cord from fraying. 7. LED...