Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Shark Dateigröße: 2.53 mb Dateiname: Unterrichtssprache:

Iron should be plugged into a 120V AC electric outlet only. Make sure the plug is securely in the socket. Temperature setting might be too low. Try turning to a higher setting. Water droplets coming from steam vents. Variable Steam Control Dial may be set in “self clean” position. Align the dial to the "0" to "Max" steam setting. Iron may not be hot enough. Set temperature to “MAX” position. Always allow iron sufficient time to heat up before activating the variable steam control. Overuse the steam burst. Allow more time between each burst. An odor is being emitted from the new iron or smallparticles arecoming out. This is normal. Follow the instructions for first-time use and allow iron to steam through 2-3 fillings and press the steam burst button occasionally to eliminate small white particles. Iron doesn’t steam. Water tank may be empty or water level is very low. Add water. Make sure the fabric/temperature setting and the variable steam control are correctly set. For maximum steam, set “MAX” on steam control and the temperature setting should be set on “•••.” Steam control dial is set on “0.” The soleplate is not hot enough and the anti-drip feature switches off the steam. Always allow the iron to reach the selected temperature with the variable steam control setting at “0.” For more steam, turn temperature dial to a higher setting and the steam control to “MAX.” If the temperature setting and steam control settings are correct and there is no steam, gently move the iron left or right a couple of times. Move the Steam Control Dial from “0” to “Max” a few times. Notes GI468N 10 / GI468N 12 / GI468CN 10 / GI468CN 12 ...

Herunterladen

Geben Sie zwei Ziffern: