• Part Two is Keystrokes. Let’s enjoy all the innovative features of the mouse step by step as follows : image A image B Section I: Change Mouse DPI :Set mouse XY axis sensitivity levels In order to Shift from pixel-precise targeting to fast-twitch maneuvers, without stopping the action. This avoids the error in operation for more efficiency. You can configure your mouse as synchronism or non-synchronism higher/lower with many parameters to control the X/Y dpi by yourself in this smart X7 Softwa

OPERATION IS SUBJECT TOTHE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a reside

• Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1).

Switch frequency channels to prevent interference from other RF pointing devices. (See the following section for more information.) - 2 - PDF ... "FinePrint pdfFactory Pro" ..... Wireless Optical Zoom Mouse Selecting the Frequency Channel The RF-Mouse operates on two frequency channels. To prevent interference when using two RF Mice in close proximity, a different frequency channel should be used for each mouse. Refer to the following instructions to change the frequency channel for your mouse:

Mit dem vertikalen Rad rollen Sie auf- und abwarts; mit dem horizontalen Rad rollen Sie nach links und rechts oder zoomen ein Dokument ein oder aus. Die Maustasten konnen zum Start von NetJump oder LuckyJump programmiert werden, um haufig ausgefuhrte Programme schnell auszufuhren. Sie konnen sogar Ihr eigenes Befehlsmenu erstellen und mit einem Klicken alle Ihre Lieblingsprogramme unter den Cursor setzen! Den IR-Empfanger anschlie.en und aufstellen Der IR-Empfanger wird so wie eine normale Maus

You will see a mouse icon “” appear on the bottom right of your task bar (near the clock area) Mouse Properties Window 9. Double click on the mouse icon “” will bring you the mouse property (figure on the right) If the mouse image appears in the mouse properties menu looks exactly the same as the mouse on hand, then this means that you have successfully installed the 6K-Works. 7. Restart your computer after the driver has been installed STEP TWO: HOW TO PROGRAM YOUR MOUSE BUTTONS MOUSE Propertie

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Federal Communications Commission Requirements The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a res

Office-Benutzer werden diese Funktion lieben—mit dem vertikalen Rad und durch Drucken der [Strg]-Taste rollen Sie durch lange Dokumente und mit dem gleichen Rad zoomen Sie es fur eine Nahansicht ein. Dies funktionert sogar bei der Druckvorschau! Die dritte Taste kann zum Start von NetJump oder LuckyJump programmiert werden—zwei definierbare Leisten, die haufig benutzte, nutzliche Programme mit nur einem Klicken offnen. Und erstellen Sie anhand leicht nachvollziehbaren Schritten Ihr eigenes Befeh