Failure to follow these instructions could result in damage to your equipment and may void your warranty. Replacing the keyboard in your computer requires three basic steps: • Turn off the computer. • Remove the keyboard. • Install the new keyboard. Note: A video version of the installation instructions is available at Tools Required • Jeweler’s flat-blade screwdriver • Phillips screwdriver Electrostatic Discharge (ESD) Static electricity, a normal and natural phenomenon, builds up on

Failure to follow these instructions could damage your equipment and void its warranty. Note: Written and video instructions covering customer-installable parts are available at Warning: During this procedure, keep small parts away from children. Tools Required The only tool required for this procedure is a jeweler’s flat-blade screwdriver (if keyboard is locked). Removing the Installed Keyboard Warning: Always shut down your computer before opening it to avoid damaging its internal components o

As part of the SmarTouch STS, the wireless mouse communicates with the system via the ST-CP, control processor. When used with the SmartPresenter system, the wireless mouse communicates with the system control processor, SP-1. NOTE: The CNRFGWA must have PROM # 2251 for wireless mouse support. A CNRFGWA with this PROM reports on the network with software version 2.00. Early versions of the CNRFGWA do not support the wireless mouse. Models There are two CRESTRON wireless mice available: CNWM and

SIMPL Windows is Crestron Electronics' software for programming Crestron control systems. It provides a well-designed graphical environment with a number of workspaces (i.e., windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. The next two subsections describe a sample SIMPL Windows program that utilizes a CNWM mouse. The first subsection details how the sa

Updating Your Software To use your Apple Magic Mouse and its full range of features, update your Mac to Mac OS X version 10.5.8 or later and install the Wireless Mouse Software Update 1.0; or update to Mac OS X version 10.6.2 or later. To update to the latest version of Mac OS X, choose Apple (K) > Software Update from the menu bar, and follow the onscreen instructions. When installation is complete and you restart your Mac, use Software Update again to make sure all of the available updates are

AA If your mouse isn’t paired with a Mac, the light blinks, indicating your mouse is in discovery mode and ready to pair (pairing means your mouse and Mac are wirelessly connected to each other and ready to communicate). AAIf you don’t pair your mouse with your Mac within 3 minutes, the light and mouse turn off to preserve battery life. Slide the On/off switch on the bottom of your mouse to turn it on again, allowing you to pair it with your Mac. AAWhen your mouse is on and paired, with the batt

This product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables (including Ethernet network cables) between system components to reduce the possibility of causing interference to radios, television sets, and other electronic devices. Turn the television or radio antenna until the interference stops. Responsible party (con