Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
•
Enhanced troubleshooting through improved event messaging.
•
Auto clean is now available and can be enabled from the Basic and Expert Partition Wizards.
Fixes
•
Improved a number of OCP and RMI screens.
•
Fixed a rare case where the library could not detect an expansion module.
•
Fixed a rare corner case that resulted in library event 2036 “Unintended termination of application
process.”
•
Corrected intermittent errors in data provided to Tape Assure Advanced.
•
Fixed a rare top or bottom cover detection issue seen during library reboot.
•
Fixed a rare issue where a library reboot could leave the library powered off.
•
Fixed a corner case library reboot issue that could leave the library OCP with a “green screen.”
•
Fixed an MSL Encryption Kit token backup file format incompatibility issue between token backup
files created with the MSL6480 and token backup files created with other libraries. Now token
backup files created on any autoloader or library supported by the encryption kit can be restored
on any other autoloader or library supported by the encryption kit.
•
Fixed an issue to prevent the 4016 database backup warning event from occurring.
Known issues and workarounds
•
Issue: Pulling on the magazine handle while the library is unlocking the magazine can damage
the library.
Workaround: When opening a magazine, wait until the OCP or RMI says that the magazine is
unlocked before attempting to remove it.
•
Issue: When using HP StoreEver MSL6480 4.30 firmware with Advanced Control Path Failover
enabled for a partition, if the library inventory changes at the exact same time as the active control
path drive is disconnected, the application may not receive notification of the inventory change.
Workaround: Do not import or export media while the active control path drive is being replaced.
Installation instructions
1.
Download current firmware from the HP support website: http://www.hp.com/support/storage.
2.
Log into the RMI as the administrator user.
3.
From the Maintenance > Software Upgrades > System Firmware screen browse to the location of
the library firmware file and then click Upload.
Determining the current version
The library firmware version is displayed on the RMI and OCP main screen in the upper portion of
the left pane.
Table 1 Firmware versions
Firmware version
Released
Status
4.30
6/9/2014
Active
All versions not listed are inactive.
4
Fixes
...