Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Director 2/140 Power Cord Requirements
Director 2/140 Power Cord Requirements
The Director 2/140 includes two power supplies (labeled PS0 and PS1 on the rear
of the unit) for redundancy. You must connect each power supply to an
appropriate power source that provides 220-volt AC power. Connect each Director
2/140 power supply to a power distribution unit receptacle using a PDU power
cord.
Note: To ensure redundancy, install an second optional PDU and connect each PDU
power cord to a separate PDU.
Director 2/64 Power Cord Requirements
The Director 2/64 includes two power supplies (labeled PS0 and PS1 on the rear
of the unit) for redundancy. Each power supply must be connected to an
appropriate power source that provides 110-volt or 220-volt AC power. Connect
the Director 2/64 to a power source using one of the following methods:
■
Connect each power supply to a 110-volt receptacle using a 110-volt AC
power cord.
■
Connect each power supply to a power distribution unit using a PDU power
cord.
Note: To ensure redundancy, connect each AC power cord to a separate facility power
source or PDU.
WARNING: To prevent electric shock when connecting the Director to primary
facility power, use only the supplied power cord(s), and ensure the facility
power receptacle is the correct type, supplies the required voltage, and is
properly grounded.
2
Read Me First - HP StorageWorks Director Power Cord Advisory
...Dieses Handbuch ist für folgende Modelle:
Media Storage - HP StorageWorks Director 2/64 base 32 port config (74.11 kb)
Media Storage - HP Surestore Director fc-64 (74.11 kb)
Media Storage - HP StorageWorks Director 2/140 (74.11 kb)