Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
7. If you wish to use the optical drive, remove the blank from the HP StorageWorks RDX DL Server
Module and insert the CD or DVD drive that you removed in step 2. Reconnect the SATA cable
to the rear of the optical drive.
8. Push the HP StorageWorks RDX DL
Server Module fully into the bay
and secure it using the screws that
you removed in step 3.
1 Install HP StorageWorks RDX DL
Server Module
2 Secure with screws
9. Replace the server covers and power cable, power up the server, as instructed in the HP ProLiant
Server User Guide. Refer to the HP RDX Backup System User Guide for operating and
troubleshooting information.
Returning the unit
IMPORTANT: Do not return the complete HP StorageWorks RDX DL Server Module.
Follow the troubleshooting processes in the appropriate optical drive or RDX user guide. If
there is an issue that requires replacement, follow the instructions below.
If there is a problem with the optical drive, remove it and return for servicing.
If there is a problem with the RDX
Removable Disk Backup System, detach the
cables, remove the four screws that secure
the RDX unit to the module and keep them
safe for use with the replacement module.
Remove the RDX unit from the module and
return it for servicing. It is important to
retain the cables; the replacement unit
does not include cables.
Return details are different for the two
units; details can be found on the base of
the units after you remove them.
© 2009 by Hewlet -Packard
Development Company, L.P.
5697-7882