Login:
Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Anleitung HP, modell HP StorageWorks X3400 Network Storage Gateway

Hersteller: HP
Dateigröße: 35.82 kb
Dateiname:
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Dieses Gerät hat auch andere Anweisungen:

Anleitung Zusammenfassung





2.
If connecting to the storage system using the direct attach method,
connect the following cables to the back panel of the storage system
in the following sequence: keyboard, mouse, network cable, monitor
Power on and complete the configuration
cable, and power cable.
1.
Power on the system by pushing the power button on the front panel
(remove the bezel if needed). If using iLO 2, click Momentary Press
NOTE:
on the Power Management page to power on the server, then click
Launch on the Status Summary page to open the iLO 2 Integrated
The keyboard, mouse, and monitor are not provided
Remote Console and complete the installation process.
with the storage system.
The storage system starts and displays an HP Network Storage
System installation screen. The storage system installation process
3.
If connecting to the storage system using the remote management
takes approximately 10–15 minutes.
method, connect a network cable to a data port, a network cable
to the iLO 2 port, and power cable.
NOTE:
Your storage system comes pre-installed with the
Access the storage system
Microsoft Windows Storage Server 2008 operating
system. There is no operating system installation
required.
Use either the direct connect or remote management method to connect
to the storage system.
When the storage system installation process nears completion, the
IMPORTANT:
Windows Storage Server 2008 desktop displays the following
Only the direct attach and remote management access methods
message: The user's password must be changed before logging on
can be used to install the storage system. After the storage
the first time. Log on to the storage system by establishing an
system installation process is complete and the system's IP
Administrator password:
address has been assigned, you can then additionally use the
2.
Click OK.
remote browser and remote desktop methods to access the
storage system.
3.
Type an Administrator password in the New password box.
4.
Re-type the Administrator password in the Confirm password box.
5.
Click the blue arrow next to the Confirm password box.
• Direct attach — Connect a monitor, keyboard, and mouse directly
to the storage system. This access method is mandatory if your net-
6.
Click OK.
work does not have a Dynamic Host Configuration Protocol (DHCP)
server.
After the Administrator password has been set, the storage system
completes the installation process.
• Remote management — Access the storage system using the Integ-
rated Lights-Out 2 remote management method:
7.
When prompted, press CTRL+ALT+DELETE to log on to the system.
1.
Ensure that a network cable is connected to the iLO 2 port
If using iLO 2, on the iLO 2 Integrated Remote Console tab, click
located on the back of the storage system.
the button labeled CAD and then click the Ctrl-Alt-Del menu item.
2.
Locate the iLO 2 Network Settings tag attached to the storage
After logging in for the first time, the Welcome screen of the HP
system and record the default user name, password, and DNS
StorageWorks Rapid Startup Wizard opens. Use the HP StorageWorks
name.
Rapid Startup Wizard to set up your system with basic configuration
3.
From a remote computer, open a standard Web browser and
information.
enter the iLO 2 management hostname of the storage system.
After the storage system installation process is complete, you can use
the remote browser and remote desktop methods to access and configure
the storage system. See the HP StorageWorks X1000 and X3000
NOTE:
Network Storage System user guide for more information about using
By default, iLO 2 obtains the management IP
these access methods.
address and subnet mask from your network’s DHCP
server. The hostname found on the iLO 2 tag is
automatically registered with your network’s DNS
server.
Manage your storage
After installing and setting up your HP Network Storage System, you
can begin managing your storage using the Automated Storage Manager
4.
Using the default user information provided on the iLO 2
(ASM). HP ASM comes preinstalled on all HP X1000 Network Storage
Network Settings tag, log on to the storage system.
Systems.
For detailed instructions on using each of these access methods, see the
HP StorageWorks X1000 and X3000 Network Storage System user
guide
or the HP Integrated Lights–Out 2 user guide.
Page 2


...

Dieses Handbuch ist für folgende Modelle:
Media Storage - HP StorageWorks X3800 Network Storage Gateway (35.82 kb)
Media Storage - HP StorageWorks X1400 Network Storage System (35.82 kb)
Media Storage - HP StorageWorks X1500 Network Storage System (35.82 kb)
Media Storage - HP StorageWorks X1600 Network Storage System (35.82 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien