Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
MSA6X Series Enclosure
About this document
and ProLiant DL320S
This document details procedures for replacing a failed
backplane in an MSA6X Series Enclosure or ProLiant DL320S.
Backplane replacement
Before you begin
instructions
CAUTION: Before removing the failed component, make sure
that you have the replacement part available. Removing a
component impacts the airflow and cooling ability of the
device.
For updates, visit the HP website:
http://www.hp.com/support/manuals.
To prevent improper cooling and thermal damage, do not
operate the enclosure unless all bays are populated with either
a component or a blank.
Do not remove more than one component or blank from the
enclosure at a time. Doing so impacts the airflow and cooling
ability of the device. To avoid possible overheating, insert the
new or replacement component as quickly as possible. If the
internal temperature exceeds acceptable limits, the enclosure
may overheat and automatically shut down or restart.
Parts can be damaged by electrostatic discharge. Use proper
anti-static protection.
Verifying component failure
Before replacing the backplane, use the following methods to
verify component failure:
•
Check the hard drive status LEDs as identified in the
following table. Check with known good hard drives.
•
Check the host log for errors.
Hard drive LED combinations
Online/activity LED Fault/UID LED
Interpretation
(green)
(amber/blue)
On, off, or flashing Alternating amber
The drive has failed, or
and blue
a predictive failure
alert has been received
for this drive; it also
has been selected by a
management
application.
On, off, or flashing Steadily blue
The drive is operating
normally, and it has
been selected by a
© Copyright 2006 Hewlett-Packard Development Company, L.P.
management
The information contained herein is subject to change without notice.
application.
The only warranties for HP products and services are set forth in the
On
Amber, flashing
A predictive failure
express warranty statements accompanying such products and services.
regularly (1 Hz)
alert has been received
Nothing herein should be construed as constituting an additional
for this drive.
warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
Replace the drive as
soon as possible.
Part number: 440586-001
On Off The drive is online, but
First edition: 02/2007
it is not currently active.
*440586-001*
...Dieses Handbuch ist für folgende Modelle:
Media Storage - HP MSA60 Dual Domain (12) 1TB 3.5-inch DP SAS MDL HDD 12TB Bundle (459.57 kb)
Media Storage - HP MSA60 Dual Domain (12) 450GB 3.5-inch DP SAS HDD 5.4TB Bundle (459.57 kb)
Media Storage - HP StorageWorks MSA60 with 12 146GB SAS LFF 1.8TB Bundle (459.57 kb)
Media Storage - HP StorageWorks MSA60 with 12 300GB SAS LFF 3.6TB Bundle (459.57 kb)