Login:
Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Anleitung Ozark Trail, modell WMT-1410N

Hersteller: Ozark Trail
Dateigröße: 1.24 mb
Dateiname: 8a5b73ef-b4b6-445d-88b4-117fad47aaa3.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Any damage caused by applying insecticide or pesticide on your product is not covered by the limited warranty. • Our recreational products are constructed to rigid specifications. They are not made, however, for extreme v/eather, climates, or environments. Modification, abuse and extreme v/eather are some conditions that may adversely affect the structural integrity. • Additional precautions may be necessary during inclement or “surprise" v/eather conditions. Here are some tips that may help during these times: 13* Use guy lines to help secure your structure during periods of heavy v/inds. CSr* Storms or steady rains may collect in v/ater pockets on the roof. This will add weight, which can weaken the overall structure causing the uprights to collapse. Maintain a watchful eye and remove any water accumulation that may occur. • Your product must be stored dry. One of the easiest ways to damage your product is storing it while it is v/et. Storing a v/et tent as short as 24 hours in v/arm v/eather is likely to cause mildew on the fabric. Once mildew sets in, the stains are permanent. Stains cannot be removed without potential harm to the fabric coatings and are not covered by the limited warranty. • If you must close camp in the rain, open your product and set it up to allow it to dry as soon as possible. Even v/hen your product appears to be dry after use, it is always best to unfold and assure it is completely dry before storing. Hanging it outside or even leaving loosely clumped in your house for a few days, turning it inside and out to assure it has dried everywhere, can help prevent damage. • This product is not machine washable. To clean product, use mild soap and let it dry thocgWybefstorage LPCA-168BK Model # WMT-1410N 3 Room Cottage Cabin 14 ft. x 10 ft. x 88 in. ✓ QTY. DESCRIPTION PART NUMBER FABRIC BODY — 1 Tent Body POLES N/A 1 Steel, chain-corded Center Roof Pole w/R-Springs & Hubs-black w/red dot CRPL-375BK 2 Steel, chain-corded Side Roof Pole w/R-Spring & Hub-black w/red dot SRPL-375BK 6 Steel, chain-corded Roof Gable Pole w/R-Spring- black w/blue dot RGPL-137BK 2 Steel, chain-corded Center Leg Pole-black w/purple dot LPCA-168BK 4 Steel, chain-corded side Corner Leg Pole w/R-Springs - black w/green dot LPSA-168BK 6 Steel, chain-corded Eave Pole w/R-Spring - black w/yellow dot EPOL-26BK — 1 Fiberglass, shock-corded Pocket Pole (fits at pocket top}-black If you wish to order a complete set of poles, please use: PKPL-170CM — 1 Pole Set of Twenty-Two Steel&Fiberglass Poles - black RAINFLY&Sun Shade: select from below PSET-BK 1 Rainfly w/ 4 Brass S-Hooks; center seams taped - beige/orange trim RFLY-BGORO6 1 Sun Shade w/2 Plastic S-Hooks: brown SUND-T79B110 CARRY BAG — 1 Carry Bag- beige/black trim UNIVERSAL PARTS CBAG-850BG 2 5 Way Hub- center side (one in center of each SRPL pole) 5WAY-060-2 2 4 Way Hub- left side (one to left of center on each SRPL pole) 4 WAY-070-2 2 4 Way Hub- right side (one to right of center on each SRPL pole) 4WAY-071 -2 2 3 Way Hub- gable top (one on front end and one on rear end of CRPL) 3WAY-120-1 1 4 Way Hub- gable middle (one in middle of CRPL pole) 4WAY-120-2 2 Shelf; 3 Tier SHF3-22X10 1 Pole Bag PBAG-40IN 1 Stake Bag SBAG-11IN 8 Guy Ropes; 3M GROPE-3M 2 Guy Ropes; 2M GROPE-2M 1 Hanging Pocket PCKT-T67B91 — 2 Cup Holder STAKES CUPH-BK _ 1 Stake Set of Eighteen 7 in. steel stakes SSET-18ST7IN Review your parts list above to make sure all parts listed above have been included in your package. Please do NOT return product to store. Call our TOLL FREE Numbers: 800-775-1965 or 800-366-1599 Monday-Frlday 7am - 5pm CST Mention your complete Model Number so that our Representative may assist you! ASSEMBLY INSTRUCTIONS THIS RECREATIONAL PRODUCT REQUIRES TWO ADULTS TO ASSEMBLE. * Unless otherwise specified all instructions will be given assuming the assembler is facing the front opening of the tent. * Carefully fold out your poles, using caution to prevent snapping the shock-cording. Make sure each pole segment is “seated' into the next section before flexing the pole during set-up. * Do not drop tent po!e bag. Do not bounce tent bag on its end to remove tent, as these actions may damage the shock-cording and/or pole ends. STEP 1: Verify Package Contents Verify package contents by emptying contents of bag(s) and confirming all parts are included and undamaged. Do this at home before you leave on your trip. STEP 2: Assemble Tent A) Select a smooth level site and lay out your tent. B) Extend all of your poles and sort into groups by style i.e. roof ridge poles, roof side poles, leg poles, eave poles, etc. This will simplify the assembly process. C) Lay Center Roof Pole (CRPL-375BK) in the center of tent, making sure that the center hub is secure in the middle by placing R-spring in the slot on hub. D) Attach 3 Way Hub (3WAY-120-1) on each side of the center roof pole, making) sure the reds match up. E) La...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien