Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
10 11 CHING PEDOMETER 1. Incorrect unit position • When the front of the main unit (shown to the right) or horizontal The unit may not count steps correctly in the following conditions: ATTACHING PEDOMETER Attach the unit belt or the your waistband. • Do not place the unit in NOTE: Press the clip open to remove the The clip may cause scratches to the belt if it is attached depending on the belt material. The unit may not count steps correctly in the following conditions: ATTACHING PEDOMETER Attach the unit belt or the your waistband. • Do not place the unit in NOTE: Press the clip open to remove the The clip may cause scratches to the belt if it is attached depending on the belt material. The unit must be positioned horizontally with the ground. When Steps are Counted The unit determines whether you are walking continuously to avoid counting movement other than steps. It does not display the step count for the first four seconds of walking. If you continue walking for more than four seconds, it displays the step count for the first four seconds and then continues to count. 2. Walking at an inconsistent pace • When you shuffle or wear sandals • When you fail to walk consistently in a crowded place 3. Irregular unit movement • Standing up and/or sitting down movement • Taking part in sports other than walking • Ascending or descending movement on stairs or on a steep slope 4. Vibrations from a moving vehicle • Such as riding a bicycle, automobile, train or bus 5. Extremely slow walking 12 13 USING THE MEMORY FUNCTION CHANGING DISPLAY CHANGING DISPLAY Press the MODE Button to change the display. Each time you press the MODE Button, the display will change. Number of moderate steps Number of steps with minutes Calories Distance BATTERY SAVING MODE After 5 minutes with no button being pressed, the display will automatically turn off. However, the unit continues measuring steps. This mode extends the battery life. Press the MEMO or MODE Button to activate the display again. 14 This unit can store The current day’s data is automatically time reaches 12:00AM. The display will return NOTE: The time must be correctly set How to view data stored in the memory Press the MODE Button until the data you want to see is displayed: • Steps • Moderate steps with minutes • Calories • Distance Press the MEMO Button. The previous day’s data is displayed. Continue to press the MEMO Button to display all seven days of data. NOTE: If no button is pressed for more than 1 minute, the display will return to the current day’s data. Press the MODE Button to return to the current day’s data. 15 1. Remove the screws on the battery cover located on the back of the unit. Use a small screwdriver to remove the screws on the battery cover. 2. Remove the battery cover. Y INSTALLATION Low Battery Indicator When the Low Battery Indicator immediately replace the battery with a new When the battery is removed from stored in the memory will be erased. stored in the memory in a notebook. USING THE SYSTEM RESET Use the SYSTEM RESET function in the following cases: • When the display becomes • When you want to delete Press the SYSTEM RESET Button on the back of the unit. All the data in memory is deleted and return to default values. To reset the time, height and weight refer to “Setting the Time” on page 8. The battery is installed Y INSTALLATION Low Battery Indicator When the Low Battery Indicator immediately replace the battery with a new When the battery is removed from stored in the memory will be erased. stored in the memory in a notebook. USING THE SYSTEM RESET Use the SYSTEM RESET function in the following cases: • When the display becomes • When you want to delete Press the SYSTEM RESET Button on the back of the unit. All the data in memory is deleted and return to default values. To reset the time, height and weight refer to “Setting the Time” on page 8. The battery is installed 16 17 CARE AND BATTERY INSTALLATION BATTERY INSTALLATION 3. Remove the old battery. Take the battery out with is not easily breakable. NOTE: • DO NOT use a pair of metal tweezers or a screwdriver. CAUTION Dispose of the device, battery, and components according to applicable local regulations. Unlawful disposal environmental pollution. CAUTION Do not throw the battery into fire. The battery may explode. 4. Insert the new battery. Place the positive (+) side of the battery upward. Insert the battery in the direction of the arrow as illustrated. 5. Replace the battery cover. Insert the projected portion of the battery cover as illustrated. Tighten the screws on the battery cover. After installing the battery, set time of day, weight and height. Refer to “Setting the Time” on page 8. 18 To keep your pedometer the unit from damage follow the listed below: CAUTION Do not disassemble or modify approved by Omron Healthcare Clean the unit with a soft dry cloth. Do not use any abrasive or volatile cleaners. Do not immerse the unit or any of the components in water. The unit is...