Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
215-00115 09/06 Rev B Table of Contents Important Safety Information 3 Before You Start 4 Assembly 5 Exploded View 6 Parts List 7 Warranty Information 8 2 Important Safety Information Prior to assembly, remove components from the box and verify that all the listed parts were supplied. NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. SAFETY INFORMATION WARNING! Before using this unit or starting any exercise program, consult your physician. This is especially important for persons over the age of 35 and/or persons with pre-existing health problems. Keys Fitness Products LP assumes no responsibility for personal injury or property damage sustained by or through the use of this product. It is the owner’s responsibility to ensure that all users of this unit have read the Owner’s Manual and are familiar with safety information and precautions. SAFETY PRECAUTIONS • This Strength Trainer unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. • Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use this unit with bare feet, sandals, socks or stockings! • Always examine your unit before using to ensure all parts are in working order. • Do not leave children unsupervised near or on the unit. • Service to your Strength Trainer unit should only be performed by an authorized service representative, unless authorized and/or instructed by a Keys Fitness technician. Failure to follow these instructions will void the warranty. 3 Before You Get Started THANK YOU for making this Strength Trainer unit a part of your exercise program. Keys Fitness and our Strength Trainer Series assures the very best in value, appearance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer. REGISTRATION CARD To avoid unnecessary delays in warranty parts and to insure that a permanent record of your purchase is on file with our company, be sure to send in the warranty registration card or register on-line at within 10 days of purchase. STRENGTH TRAINER SERIES MODEL: ST-LEG QUESTIONS? CALL 1-888-340-0482 Monday-Friday 8:30-5:30 Central Time 4 Assembly NOTE: Hand Tighten bolts and nylon nuts until machine is fully assembled. Insert the Leg Developer Holder (01) into the front opening of Main Frame and secured with a knob bolt. Attach the Leg Developer (02) to the bracket of the Leg Holder (01), and assemble use one Hex Bolt M10X75 (03), two Washers D10 (04) and one Aircraft nut (05). Insert one Foam Tube (06) halfway through the hole on the Leg Developer Holder (01). Insert two Foam Tubes (06) halfway through the holes on the Leg Developer (02). Push six Foams (07) onto the Tubes from both sides. Slide the Olympic Sleeve (08) onto the weight holder in front of the Leg Developer (02). Attach a Spring Clip (09). Note: See Exploded View on Pg 6 for Image. 5 Assembly/Exploded View 6 Parts List ST-LEG Parts List Rev B Ref # Part # Description Qty 1 223-00946 LEG DEVELOPER HOLDER, ST-LEG 1 2 223-00945 LEG DEVELOPER, ST-LEG 1 3 202-00177 HEX BOLT, (3/8*2 7/8) M10*75 1 4 202-00420 WASHER 10, IRONMAN 2 5 202-00168 AIRCRAFT NUT, M10 M-PR 1 6 219-00113 FOAM TUBE M-FID 3 7 219-00339 ROLLER FOAM 6 8 210-00111 OLYMPIC SLEEVE, M-FIDL/ST-FIDL/ST-DFIDL 1 9 210-00162 SPRING CLIP, M-OB/M-OBA 1 7 Warranty KEYS FITNESS PRODUCTS, L.P. STRENGTH TRAINER WARRANTY Keys Fitness Products L.P. warrants this product for a period of 90 days on parts and lifetime on the frame from the original date of purchase. This warranty covers the product from defects in materials and workmanship for the original purchaser. Using this product for commercial purposes, products damaged by misuse, abuse, or from shipping, moving and storage will void this warranty. Replacement parts are available from Keys Fitness Products L.P. To contact us for customer service or replacement parts, call 1-888-340-0482. CUSTOMER SERVICE If you have any questions regarding this or any Keys Fitness product, or if we may be of assistance in any way, please do not hesitate to call our toll free number 1-888-340-0482. 8 Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482 ...