Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sony Dateigröße: 18.98 mb Dateiname: 2685333421.pdf Unterrichtssprache:

For details, refer to the instruction manual supplied with your CAM. To use the CAM, remove the rubber cover from the CAM slot. Switch off the TV when inserting your CAM into the CAM slot. When you do not use the CAM, we recommend that you replace the cover on the CAM slot. S VHS/Hi8/DVC camcorder B Connect to the S video socket 4 or the video socket 4, and the audio sockets 4. To avoid picture noise, do not connect the camcorder to the video socket 4 and the S video socket 4 at the same time. If you connect mono equipment, connect to the L socket 4, and set “Dual Sound” to “A” (page 21). Headphones C Connect to the i socket to listen to sound from the TV on headphones. 30 GB Connecting to the TV (rear) To connect Do this PC D Connect to the PC 5/ 5 sockets. It is recommended to use a PC cable with ferrites. DVD player with component output DVD player Decoder DVD recorder VCR Video game equipment DVD player Digital satellite receiver PC Decoder Digital satellite receiver or DVD player E DVD player with component output F Connect to the HDMI IN 6 socket if the equipment has a HDMI socket. The digital video and audio signals are input from the equipment. If the equipment has a DVI socket, connect the DVI socket to the HDMI IN 6 socket through a DVI - HDMI adaptor interface (not supplied), and connect the equipment’s audio out sockets to the audio in HDMI IN 6 sockets. Notes • The HDMI sockets only support the following Video inputs: 480i, 480p, 576i, 576p, 720p and 1080i. To connect a PC, please use the PC input socket. • Use HDMI certified cable with HDMI logo. Connect to the component sockets and the audio sockets / 3. Using Optional Video game equipment, DVD player or decoder G Connect to the scart socket / 1. When you connect the decoder, the scrambled signal from the TV tuner is output to the decoder, then the unscrambled signal is output from the decoder. DVD recorder or Connect to the scart socket / VCR that supports 2. SmartLink is a direct link SmartLink H between the TV and a VCR/DVD recorder. 31 GB Additional Information Specifications Display Unit Power Requirements: 220–240 V AC, 50 Hz Screen Size: 20 inches Display Resolution: 1,366 dots (horizontal) . 768 lines (vertical) Power Consumption: 65 W or less Standby Power Consumption: 1 W or less Dimensions (w . h . d): Approx. 500 . 406 . 209 mm (with stand) Approx. 500 . 370 . 100 mm (without stand) Mass: Approx. 8 kg (with stand) Approx. 7 kg (without stand) Panel System LCD (Liquid Crystal Display) Panel TV System Analogue: Depending on your country/region selection: B/G/H, D/K, L, I Digital: DVB-T Colour/Video System Analogue: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Digital: MPEG-2 MP@ML Aerial 75 ohm external terminal for VHF/UHF Channel Coverage Analogue: VHF: E2–E12 UHF: E21–E69 CATV: S1–S20 HYPER: S21–S41 D/K: R1–R12, R21–R69 L: F2–F10, B–Q, F21–F69 I: UHF B21–B69 Digital: VHF/UHF PC Input Signal Reference Chart Terminals / 1 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, and TV audio/video output. / 2 (SmartLink) 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, selectable audio/video output, and SmartLink interface. 3 Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohms, 0.3V negative sync PB/CB: 0.7 Vp-p, 75 ohms PR/CR: 0.7 Vp-p, 75 ohms 3 Audio input (phono jacks) 500 mVrms Impedance: 47 kilo ohms 4 S video input (4-pin mini DIN) 4 Video input (phono jack) 4 Audio input (phono jacks) PC 5 PC Input (15 Dsub) (see page 31) G: 0.7 Vp-p, 75 ohms, non Sync on Green B: 0.7 Vp-p, 75 ohms, non Sync on Green R: 0.7 Vp-p, 75 ohms, non Sync on Green HD: 1-5 Vp-p VD: 1-5 Vp-p 5 PC audio input (minijack) HDMI IN 6 Video: 1080i, 720p, 576p, 576i, 480p, 480i Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, or analogue audio input (phono jacks) i Headphones jack CAM (Conditional Access Module) slot Sound Output 5 W + 5 W (RMS) Supplied Accessories Refer to “1: Checking the accessories” on page 4. Design and specifications are subject to change without notice. Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency (Hz) Standard VGA 640 480 31.5 60 VGA SVGA 800 600 37.9 60 VESA Guidelines XGA 1024 768 48.4 60 VESA Guidelines WXGA 1280 768 47.4 60 VESA 1280 768 47.8 60 VESA • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you will see the message “NO SYNC”. 32 GB Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. 1 Measure how long the 1 (standby) indicator flashes and stops flashing. For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds. 2 Press 1 on the TV (top side) to switch it of...

Herunterladen

Geben Sie zwei Ziffern: