Stimmen - 5, Durchschnittliche Bewertung: 3.6 ( )

Hersteller: Sony Dateigröße: 18.98 mb Dateiname: Unterrichtssprache:

• This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you will see the message “NO SYNC”. 32 GB Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. 1 Measure how long the 1 (standby) indicator flashes and stops flashing. For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds. 2 Press 1 on the TV (top side) to switch it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (duration and interval). When it is not flashing 1 Check the items in the tables below. 2 If the problem still persists, have your TV serviced by qualified service personnel. Picture Problem Cause/Remedy No picture (screen is dark) and • Check the aerial connection. no sound • Connect the TV to the mains, and press 1 on the TV (top side). •If the 1 (standby) indicator lights up in red, press "/1. No picture or no menu information from equipment connected to the scarts or HDMI IN socket • Check that the optional equipment is on and press / repeatedly until the correct input symbol is displayed on the screen. • Check the connection between the optional equipment and the TV. • When connecting any equipment to the HDMI IN 6 socket or when changing the resolution, some dots can appear blinking on the screen for a few seconds. HDMI signal decoding is in progress and it does not indicate a malfunction. Double images or ghosting • Check aerial/cable connections. • Check the aerial location and direction. Only snow and noise appear on the screen • Check if the aerial is broken or bent. • Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Distorted picture (dotted lines or stripes) • Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment. • When installing optional equipment, leave some space between the optional equipment and the TV. • Make sure that the aerial is connected using the supplied coaxial cable. • Keep the aerial cable away from other connecting cables. Picture noise when viewing a TV channel • Select “Manual Programme Preset” in the “Set-Up” menu and adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 26). Some tiny black points and/or bright points on the screen • The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes • Select “Reset” in the “Picture Adjustment” menu to return to the factory settings (page 20). Additional No colour or irregular colour • Check the connection of the Y, PB/CB, PR/CR jacks of 3. when viewing a signal from the • Make sure that the Y, PB/CB, PR/CR jacks of 3 are firmly seated in their Y, PB/CB, PR/CR jacks of 3 respective sockets. 33 GB Sound Problem Cause/Remedy No sound, but good picture •Press 2 +/– or % (Mute). • Check that “TV Speakers” is set to “On” in the “Sound Adjustment” menu (page 22). Noisy sound • See the “Picture noise” causes/remedies on page 33. Channels Problem Cause/Remedy The desired channel cannot be selected • Switch between digital and analogue mode and select the desired digital/ analogue channel. Some channels are blank • Scrambled/Subscription only channel. Subscribe to the Pay Per View service. • Channel is used only for data (no picture or sound). • Contact the broadcaster for transmission details. Digital channel is not displayed • Check that the aerial is plugged directly into the TV (not through other equipment). • Contact a local installer to find out if digital transmissions are provided in your area. • Upgrade to a higher gain aerial. General Problem Cause/Remedy The TV turns off automatically (the TV enters standby mode) • Check if the “Sleep Timer” is activated, or confirm the setting of “Off Time” (page 24). • If no signal is received and no operation is performed in the TV mode for 10 minutes, the TV automatically switches to standby mode. The TV turns on automatically • Check if the “On Time” is activated (page 24). Some input sources cannot be selected • Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input source (page 25). The remote does not function • Replace the batteries. 34 GB Index Numerics 14:9 14 4:3 14 A Aerial, connecting 4 AFT 26 Audio Filter 26 Audio Language 29 Audio Type 29 Auto Start-up 25 Auto Tuning analogue and digital channels 6 analogue channels only 25 digital channels only 28 Auto Volume 21 AV Preset 25 AV2 Output 23 B Backlight 20 Balance 21 Bass 21 Batteries, inserting into the remote 4 BBE 21 Brightness 20 C CA Module Set-up 29 Category list 15 Channels auto-tuning 6 selecting 13 Skip 27 Clock Set 24 Colour 20 Colour Tone 20 Confirm 27 Connecting an aerial/VCR 4 optional equipment 30 Contrast 20 Country 5, 25...

Herunterladen

Geben Sie zwei Ziffern: