Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Baracoda Dateigröße: 512.82 kb Dateiname: Unterrichtssprache:

Otherwise you will loose all the data saved into your scanner. · To a .txt file (default option). The BaracodaManager gives you the possibility to modify the name of the file in which you may want to save the data. RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.3 -11 - Data Capture for Workforce in Motion 1.4.1. Real Time mode Erases all captured data stored in memory and forces the scanner in Real time mode. No other setting is changed. Important reminder: if an ACK beep or buffer is needed, the scanner must be set in the “no data loss mode” first. Enable Real Time with « No Data Loss » mode Enable Real Time without « No Data Loss » mode 1.4.2. No Data Loss mode -Enable “ACK” beep Forces the scanner in Real Time mode (with data acknowledgement); Erases all captured data stored in memory. The scanner should have been previously set in the “No data loss mode” ON (So scan the “Enable Real Time with No Data Loss mode” barcode before). Enable ACK beep 1.4.3. No Data Loss mode -Disable “ACK” beep Forces the scanner in Real Time mode (without data acknowledgement); Erases all captured data stored in memory. The scanner should have been previously set in the “No data loss mode” ON (So scan the “Enable Real Time with No Data Loss mode” barcode before). Disable ACK beep 1.4.4. Real Time -Buffered data option It’s possible to set the scanner in “Real Time with No Data Loss mode” but with no bufferisation (buffer configured to 0) when it’s not connected. In this particular situation the trigger will not activate the beam: so impossible to read barcodes in this mode, and Both LEDs blinks orange. MaxBufferedBarcodes=0Data Capture for Workforce in Motion 1.4.1. Real Time mode Erases all captured data stored in memory and forces the scanner in Real time mode. No other setting is changed. Important reminder: if an ACK beep or buffer is needed, the scanner must be set in the “no data loss mode” first. Enable Real Time with « No Data Loss » mode Enable Real Time without « No Data Loss » mode 1.4.2. No Data Loss mode -Enable “ACK” beep Forces the scanner in Real Time mode (with data acknowledgement); Erases all captured data stored in memory. The scanner should have been previously set in the “No data loss mode” ON (So scan the “Enable Real Time with No Data Loss mode” barcode before). Enable ACK beep 1.4.3. No Data Loss mode -Disable “ACK” beep Forces the scanner in Real Time mode (without data acknowledgement); Erases all captured data stored in memory. The scanner should have been previously set in the “No data loss mode” ON (So scan the “Enable Real Time with No Data Loss mode” barcode before). Disable ACK beep 1.4.4. Real Time -Buffered data option It’s possible to set the scanner in “Real Time with No Data Loss mode” but with no bufferisation (buffer configured to 0) when it’s not connected. In this particular situation the trigger will not activate the beam: so impossible to read barcodes in this mode, and Both LEDs blinks orange. MaxBufferedBarcodes=0 RoadRunners Evolution –L (1D) & -LA (Laser) – Programming Guide v1.3 -12 - Data Capture for Workforce in Motion 1.4.5. Batch mode BATCH MODE Forces the RoadRunners Evolution in Batch mode. Erases all codes in memory When in batch mode, the scanner will wait for the appropriate command in order to start uploading the barcodes: this command can come · from the BaracodaManager · from reading the “Upload batch data” barcode here after If this barcode is read when the reader is in batch mode and connected, the reader will automatically upload to the host all the data in its memory. If not in batch mode or not connected, the scanner will ignore this barcode. Upload batch data (with No Data Loss on) When scanning this barcode, the scanner will send a message to the host, meaning that it wants to upload its data. Following this, the host will launch the upload process and grab the batch data. If the host application has received all the expected data, it will acknowledge the upload to the scanner which will erase the data from its memory. If not, the host application will send a negative acknowledgment message to the scanner which will keep the data in memory, ready to retry an upload. If the data transfer has been successful (the scanner has received the acknowledgment and erased its memory) and, for any reason, the user gets to realize that data has been lost at a higher level (keyboard emulation for example), it still has the possibility to recover the last batch data into the scanner’s memory, by scanning the below barcode. Restore last batch data Restore last batch + launch upload Please note that the data recovering won’t be possible if other barcodes have been scanned or if the scanner has been shut down after the upload. MaxBufferedBarcodes=MAXData Capture for Workforce in Motion 1.4.5. Batch mode BATCH MODE Forces the RoadRunners Evolution in Batch mode. Erases all codes in memory When in batch mode, the scanner will wait for the appropriate command ...

Herunterladen

Geben Sie zwei Ziffern: