Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Toshiba Dateigröße: 964.41 kb Dateiname: Unterrichtssprache:

For most queries please refer to this manual and keep it safe for future reference. 1-1 1. INTRODUCTION EM1-33046A 1. INTRODUCTION This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. (for USA only) Changes or modifications not expressly approved by manufacturer for compliance could void the user's authority to operate the equipment. "This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations." "Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouilleur de Canada." (for CANADA only) This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. WARNING! Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. WARNING! CAUTION: Do not touch moving parts. To reduce the risk that fingers, jewelry, clothing. etc., be drawn into the moving parts, push the switch in the "OFF" position to stop movement. Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual and written inside or outside of the printer should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manual, turn off the power, unplug the machine, then contact your authorised TEC representative for assistance. 1-2 1. INTRDUCTION EM1-33046A 1.1 APPLICABLE MODEL 1.1 APPLICABLE MODEL B - 4 4 2 - Q Q Destination Code QQ: North America QP: Europe GH12-GB: UK Thermal direct/Thermal transfer 1.2 UNPACKING AND INSPECTION After receiving your B-442 Bar Code Printer, carefully inspect the device and its accessories. The B-442 is specially packaged to withstand damage in shipping. If damage is evident, a damage claim should be filed immediately with the transportation company. Please save the printer packaging materials in case you need to reship the printer in the future. 1.3 EQUIPMENT CHECKLIST • B-442 Bar Code Printer unit • Ribbon supply/rewind spindle (2 pcs.) • Ribbon paper core • Ribbon rewind spindle • Label supply roll spindle • External label roll mount • Power cord • AC adapter • RS232C Interface cable • "Free Label" Software • "Window Driver" Software If any parts are missing, contact your TEC representative for assistance. 1-6 2. SPECIFICATIONS EM1-33046A 2.1 PRINTER 2. SPECIFICATIONS 2.1 PRINTER 2.1.1 Printer Block Type: Direct thermal or thermal transfer Print Speed: 1.5 inches or 2.0 inches per second Resolution: 203 dots per inch (8 dots per mm) Font Styles: Five alphanumeric fonts from 0.059 inches H (1.5 mm) to 0.23 inches (6.0 mm), expandable vertically and horizontally up to 8 times. Bar Codes: Code 39, Code 93, Code 128 UCC, Code 128 (Subsets A, B and C), Codabar, Interleaved 2 of 5, EAN-8, EAN-13, UPC-A, UPC-E, EAN and UPC with 2 or 5 digit add-on, Postnet and Chinese Post Code 2D Codes: Maxi Code, PDF-417 * PDF417 is a trademark of Symbol Technologies, Inc. 2.1.2 Media Width: 0.98 inches (25 mm) to 4.53 inches (115 mm) Length: 0.47 inches (12 mm) to 10.75 inches (273 mm) NOTE: In below case, effective print length may become shorter than 273 mm. • Use Windows font in " Free label" • Download logo, font, program into the printer memory. Thickness: Thermal Label ............ 0.003 inches (0.08 mm) to 0.018 inches (0.46 mm) Tag Paper, Ticket....... 0.006 inches (0.16 mm) to 0.013 inches (0.32 mm) Type: Roll-feed, die-cut or fan-fold labels, tags or tickets Supply Roll Capacity: 4.3 inches (110 mm) maximum diameter on a 1 inches (25.4 mm) core. External roll mount will accommodate larger rolls up to a maximum diameter of 8.4 inches (214 mm) on a 1 inches (25.4 mm) core or 6.4 inches (163 mm) on a 3 inches (76.2 mm) core Thermal Transfer Ribbon: Black, 300 m long 2.1.3. Indicators and Switches Indicator Lights: Power, On-line, Error Switches: Power, Pause, Feed, Rear Dip Switch (Thermal Transfer/Direct Thermal Printing Switch, Black Mark/Gap Sensing Switch, Communication setting) NOTE: The functions of Pause, Feed switches and LED indicator lights may be redefined by command. 2-1 2. SPECIFICATIONS EM1-33046...

Herunterladen

Geben Sie zwei Ziffern: