Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Toshiba Dateigröße: 964.41 kb Dateiname: cf71aa71-8620-4ea8-b4c2-ff71936a8e32.pdf Unterrichtssprache:

2-1 2. SPECIFICATIONS EM1-33046A 2.2 OPTIONS 2.1.4 Communications Interface Communications: RS-232C (DB-9) at 2400, 4800, 9600 or 19200 baud Character Set: ANSI ASCII character set Word Length: 7 or 8 data bits, 1 or 2 stop bits, selectable parity Handshaking: XON/XOFF (on receive mode only) and CTS/DTR Input Buffer: 2 K bytes 2.1.5 Electrical Parts Input voltage: Switching power, 100~240 VAC ± 10%, single phase 50/60 Hz Circuit Protection: 2A maximum Grounding: Unit must be connected to a properly grounded receptacle 2.1.6 Environment Operating Temperature: 5° C to 40° C Storage Temperature: -10° C to 60° C ( Humidity: 25% to 85% ) 2.1.7 Body Size: 6.14 inches H x 9.13 inches W x 11.73 inches D (15.6 cm H x 23.2 cm W x 29.8 cm D); with external roll mount 17.95 inches D (45.6 cm D) Weight: 4.85 lb. (2.2 kg), and with external roll mount 5.38 lb. (2.45 kg) 2.2 OPTIONS A number of different options may be added to the B-442 Bar Code Printer for even greater convenience and versatility. Option Name Model No. or Part No. Description Source Memory Module B-5704-EM-QM Expandable RAM memory module (384KB) with Date/Time clock. See Note 1 Black Mark Sensor Part No. FMYH0013901 Attaching this sensor to the printer alls a detection of black marks on media. See Note 2 NOTES: 1. Contact TEC H.Q. or your nearest TEC representative. 2. Order from TEC Parts Center. 2-2E 2. SPECIFICATIONS EM1-33046A 2.3 MEDIA 2.3 MEDIA Item Type Thermal Label Tag Paper Ticket Width (mm) 25.0 ~ 115.0 25.0 ~ 115.0 25.0 ~ 115.0Length (mm) 12.0 ~ 273.0 12.0 ~ 273.0 12.0 ~ 273.0 Thickness (mm) 0.08 ~ 0.46 0.16 ~ 0.32 0.16 ~ 0.32 Inner roll diameter (mm) 110.0 max. External roll diameter (mm) 214.0 max. 1) Thermal Label 2.5 mm ~ 5.0 mm Backing 1.0 mm 23.0 mm~113.0 mm 1.0 mm 25.7 ± 0.3 mm 12.0 mm ~ 273.0 mm Paper Label Label BackingPaper Fig. 2-2 Fig. 2-1 25.0 mm~115.0 mm 2) Tag Paper Sensing Hole 2.5 mm ~ 5.0 mm 25.7 ± 0.3 mm 12.0 mm ~ 273.0 mm Fig. 2-4 Print Side Fig. 2-3 25.0 mm~115.0 mm 3) Ticket Black Line 3.0 mm ~ 30.0 mm 25.7 ± 0.3 mm 12.0 mm ~ 273.0mm Fig. 2-6 Print Side Fig. 2-5 25.0 mm~115.0 mm 2-3 2. SPECIFICATIONS EM1-33046A 2.4 RIBBON 1.0 mm 1.0 mm 4) Relationship between the head effective print width and paper. Head effective print width 1.0 mm 1.0 mm Printing Area Fig. 2-7 104.0 mm 115.0 mm (Maximum paper width) 2.4 RIBBON No. Item Specification 1 Shape Spool type 2 Width 40 mm ~ 110.0 mm 3 Max. OD O67 mm 4 Winding method The ink side is outside of ribbon winding. 2-4 2. SPECIFICATIONS EM1-33046A 2.5 CARE/HANDLING OF THE MEDIA AND RIBBON 25.7 ± 0.3 mm Fig. 2-8 Max. 105 ± 0.5 mm NOTE: When purchasing ribbon locally, they must meet the above size. There may be TEC-approved ribbons which do not fall within the above size, however, they have no functional problem. Adhesive tape Adhesive tape Ink outside Adhesive tape CoreCore BaseTreated back side Ink ribbon End tape Leader tape (Non Transmissive) Fig. 2-9 Connection between leader tape and ribbon 2.5 CARE/HANDLING OF THE MEDIA AND RIBBON CAUTION: Be sure to read carefully and understand the Supply Manual. Use only media and ribbon which meet specified requirements. Use of non-specified media and ribbon may shorten the head life and result in problems with bar code readability or print quality. All media and ribbon should be handled with care to avoid any damage to the media, ribbon or printer. Read the following guideline carefully. • Do not store the media and ribbon for longer than the manufactures recommended shelf life. • Store media rolls on the flat end, do not store them on the curved sides as this might flatten that side causing erratic media advance and poor print quality. • Store the media in plastic bags and always reseal after opening. Unprotected media can get dirty and the extra abrasion from the dust and dirt particles will shorten the print head life. • Store the media and ribbon in a cool, dry place. Avoid areas where they would be exposed to direct sunlight, high temperature, high humidity, dust or gas. • The thermal paper used for direct thermal printing must not have the specifications which exceed Na+ 800 ppm, K+ 250 ppm and CL-500 ppm. • Some ink used on pre-printed labels may contain ingredients which shorten the print head’s product life. Do not use labels pre-printed with ink which contain hard substances such as carbonic calcium (CaCO) and kaolin (AlO, 2SiO, 2HO). 3 2322 For further information please contact your local distributor or your media and ribbon manufacturer. 2-5 3. OVERVIEW EM1-33046A 3.1 PRINTER PARTS 2 5 3 3. OVERVIEW 3.1 PRINTER PARTS 4 1 Fig. 3-1 Top Front View 1. Cover Release Button 2. Pause Switch 3. Power, On-line and Error Indicator Lights 4. Feed Switch 5. Clear Viewing Window 6. Label Dispense Opening 7. Backing Paper Opening (for use with Self Peel Function) 6 7 3-1 3. OVERVIEW EM1-33046A 3.1 PRINTER PARTS Fig. 3-2 Interior View 3 2 5 4 6 9 8 137 4 12 11 10 1 1. Printer Cover (...

Herunterladen

Geben Sie zwei Ziffern: