Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Accusplit Dateigröße: 479.79 kb Dateiname: AE602M100_Instructions_LONG.pdf Unterrichtssprache:

Whenever the storage is full, extra split/lap times will NOT be stored into memory even though you reset your stopwatch and start a new event. Extra split/lap times will only be shown on the display but not recorded. In order for the stopwatch to record the lap/split times again, you must delete the data in the DATA memory. Please refer to the “Data Mode” section on the instruction manual for how to delete the memory. Instructions Introduction You are about to enjoy an advanced Cumulative and Lap memory professional digital quartz stopwatch with advanced timing features. Model AE602M100, AE760M100, AE790M500 & AE790M500DEC Stopwatch includes Time of day, Daily Alarm, Chronograph stopwatch, 100 or 500 memory, Data register (Model 760M & 790M only), Countdown timer, Stroke Measurement timer, Pacer from 5 to 240 beats per minute. Model AE790M500DEC Decimal Stopwatch includes Decimal stopwatch (1/100 of a sec, 1/1000 of a minute, 1/100,000 of an hour). Model AE760M100 & AE790M500 Speed Stopwatch includes Speed Measurement. General Features -4 buttons operation -Large LCD display with contrast adjustment -12/24 hour display -Normal time and chime -Daily alarm -Full 1/100 second chronograph with working range from 0 to 19 hr. 59 min. 59.99 seconds with 100 or 500 memory records of split and lap time. -Recall function for recorded split and lap times -Count-Down timer with working range from 0 to 19hr. 59min. 59.9 seconds -Three operating modes (Countdown Repeat, Countdown Stop, Countdown then count up) for count down timer -Stroke measurement basing on "3" -Speed measurement (AE760M100 & AE790M500 Model only) -Decimal second, minute and hour chronograph (AE790M500DEC Model only) -Segmented run memory (Model 760M & 790M only) -Beep sound selectable -Low battery check As you choose each "mode", a message will be displayed for a second before you enter the mode: Timer mode (All models) TIME (All models) TIMER Normal Time mode Pacer mode (All models) ALARM (All models) PA CER Alarm Time mode Stroke Measurement (All models) CHRONO (All models) STROKE Chronograph mode Speed mode (All models) RECALL (AE760M100 & SPEEd AE790M500 model only) Lap Time Recall mode Data mode (760M & 790M models only) DATA The operation of the stopwatch is divided into eight modes (as noted above): 1. Normal time mode 2. Alarm time mode 3. Chronograph and Recall mode 4. Data mode (760M & 790M Models only) 5. Count-down timer mode 6. Pacer mode 7. Stroke measurement mode 8. Speed mode (AE760M100 & AE790M500 model only) Button Operation -Mode - used to change the mode of the watch Start / Stop / Set - used to start and stop the timer counting or the chronograph function -Recall - used for recalling recorded split and lap times -Lap / Split / Reset / Select - for taking the record of the split and lap time This is only a brief description of these buttons. Detailed uses of the buttons are different in particular functions and will be described later in the instructions. Pressing [MODE] button will toggle among the modes above. Note that there is no auto-return function in the stopwatch. Whenever you change modes, the stopwatch will remain in that mode until the [MODE] button is pressed again Each time you enter a mode, a message will be displayed for a second before you enter the mode: Note:-In the following descriptions, items printed in dark gray stand for flashing digits. . Normal Time Mode . The starting point for operating your stopwatch is NORMAL TIME. If NORMAL TIME is not displayed, press [Mode] until it is. . Year : - 2001 Date : - January 1 Day of week : - Monday Time : -12:00 am The display format is as below : 2 0 0 1 year W E 1 -3 day, month - date A 1 0 : 3 5' 3 0 hr : min second During clock display, press [START] to switch between 12Hr and 24Hr display mode. To toggle chime ON or OFF, you can press [RESET]. The bell icon will be ON and OFF correspondingly. Normal Time Setting Press and hold [RECALL] for 2 seconds to enter setting mode. The normal time setting starts with second. The second digits will then be flashing.You can change the flashing digit by pressing [START] button.To speed up the setting you can press and hold [START] for longer than 2 seconds to activate fast setting. To select other digits, press [RESET] button. The setting order is: Second, Minute, Hour, Year, Month, Date, month-date (m-d) or date-month (d-m), Sound ON or OFF, Contrast (darkness of the digits - default is 9), then back to Second, and recycles again. Note: when the second is to be set, press [START] to reset the second digits to zero. At the end of setting, press [RECALL] or [MODE] to exit from the setting mode and back to Normal Time Display. Display for Sound ON or OFF setting :( Let the current status be "ON".) SOUnd On Press [START] to toggle Sound ON or OFF. SOUnd On Display for contrast adjustment:( Let the current contrast be "5") COnT 5 Press [START] consecutively to advance the contrast up to 16, then cycle back to 1. COnT The contrast se...

Herunterladen

Geben Sie zwei Ziffern: