Login:
Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Anleitung Honeywell, modell 44459

Hersteller: Honeywell
Dateigröße: 255.77 kb
Dateiname: 44459.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


1-19/art Created: 9-28-98 db Folder: AJ570/Hunter/41383 Alt: 2-2-99 db PAGE 1 Prints black B99A p1-19 2/7/03 9:58 AM Page 2 Ask Your Local Retailer for Other Quality Products from Hunter Fans To locate your nearest Hunter Dealer, call 1-800-4HUNTER, Air Purifiers or visit The Hunter Fan Co. website: Humidifiers PAGE 2 B99A p1-19 2/7/03 9:58 AM Page 3 Introduction CONGRATULATIONS! Please read this manual for complete instructions on installing Your new Hunter electronic thermostat will provide years of and operating your thermostat. reliable service. By saving energy, your thermostat will pay for If you require further assistance, call Hunter Technical Support itself during its first season of use. Thank you for buying a at 901-745-9222 from 8 am to 5 pm Central Time. Hunter product! Model Information: Model Number ___________________________________ _ 44459 Serial Number _____________________________________ Date Purchased____________________________________ Where Purchased___________________________________________________________ PAGE 3 B99A p1-19 2/7/03 9:58 AM Page 4 Table of Contents INTRODUCTION Read This Before Installing Thermostat Features 6 4-5 8 INSTALLATION What You Need Remove Old Thermostat Wire Labeling Mount Wallplate and Thermostat Selector Switches 10 10 11 12 14 PROGRAMMING Setting Time and Day Auto Programming Personal Program Schedule Manual Programming Weekday Programming Saturday and Sunday Programming Reviewing Programs Reviewing the Current Temperature Setting 16 17 18 19 19 21 22 23 OPERATIONS System Selector Switch Fan Switch 24 24 (continued) PAGE 4 B99A p1-19 2/7/03 9:58 AM Page 5 OPERATIONS ( continued) Table of Contents (continued) Temporary Manual Override Permanent Manual (Vacation) Override Auto Season Changeover Home Today Energy Monitor Filter Monitor Auto Recovery Keyboard Lock Backlighting 24 25 26 26 28 29 30 31 31 SAFETY FEATURES Low Battery Warning Error Mode Auto Cut-Off 32 33 33 TROUBLESHOOTING Problems & Solutions Technical Support 34 35 WIRING DIAGRAMS Heat / Cool Systems Single-Stage Heat Pump Systems Heat Only / Cool Only Systems 36 37 38 PAGE 5 B99A p1-19 2/7/03 9:58 AM Page 6 Read This Before Installing Thermostat 6-7 1 1 IMPORTANT represent most central heating, air conditioning, or space Read the entire installation section of this Owner’s heating units in use in the United States. Manual thoroughly before you begin to install or This Hunter Thermostat will NOT control multi-stage heat operate your Hunter Thermostat. pumps or 110/220 Volt systems. REMOVE THE MYLAR LABEL FROM THE LCD DISPLAY WINDOW. COMPRESSOR PROTECTION INSTALLATION 5 5 The thermostat provides a 3.5 minute delay after 2 2 All installation is normally performed at your shutting off the heating or cooling system before it can thermostat. be restarted. This feature will prevent damage to your compressor caused by rapid cycling. Note that this delay ARMCHAIR PROGRAMMING also applies to the heating system control. It does not 3 3 You can program your thermostat before installation by provide a delay when there are power outages. inserting the batteries and following the instructions starting on page 16. This can be done while you relax in TEMPERATURE RANGE your favorite chair and is a very good way to familiarize 6 6 Your thermostat can be programmed between 40°F yourself with all the functions of your Hunter Thermostat. and 95°F (4°C and 35°C). However, it will display room Note: At initial power-up this thermostat is programmed at 68°F temperatures from 32°F to 99°F (0°C and 37°C). “HI” will (20°C) for Heat and 78°F (26°C) for Cool. Any change to the set be displayed if the temperature is higher than 99°F (37°C), temperature will be treated as a Permanent Manual Override. See and “LO” will be displayed if the temperature is lower than page 25 for more information. Press Auto Program to load the 32°F (0°C). 4 4 built-in energy saving programs. NOTE: The thermostat will automatically change to the Cool OPERATION mode if the thermostat measures a temperature over 99°F Your Thermostat is designed to operate with most gas, (37°C). “Hi” will be displayed on the LCD, and the Cooling oil, electric or 2-wire hot water heating and air system will turn On. Similarly, the thermostat will conditioning systems. It will also operate single-stage heat automatically change to the Heat mode if the temperature is pumps that do not have auxiliary or emergency heat. below 32°F (0°C). “LO” will be displayed on the LCD, and the These have 24-volt or millivolt control systems and Heating system will turn On. PAGE 6 B99A p1-19 2/7/03 9:58 AM Page 7 Read This Before Installing Thermostat (continued) POWER FAILURE have approximately 1 minute to change the batteries and 7 7 Whenever the main power is interrupted or fails, the keep thermostat’s clock and program settings. Once the battery power retains the programs and current time. batteries have become too low to ensure proper operation, your system w...

Dieses Handbuch ist für folgende Modelle:
Steuerungen & Regelgeräte - 44459 (255.77 kb)
Steuerungen & Regelgeräte - 44459 (255.77 kb)

Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien