Stimmen - 3, Durchschnittliche Bewertung: 3 ( )

Hersteller: Honeywell Dateigröße: 238.79 kb Dateiname: rcr90.pdf Unterrichtssprache:

9 Repeat steps 1-6 for the DAY, EVE, and NITE periods. Afterwards, repeat steps 1-6 for 4 daily periods on Saturdays (Day 6), and 4 daily periods on Sundays (Day 7). The temperature display will show "6" for Saturdays, and "7" for Sunday times. Note: If Programming Mode is not being used and Day/Night Mode is being used, only the Weekday -DAY and NITE settings can be programmed. .. DAY/NIGHT MODE Your thermostat can be configured to change its temperature settings from "DAY" to "NITE" when commanded from a remote location. If so, the thermostat will use the weekday "DAY" and the weekday "NITE" settings. "REMOTE" and either "DAY" or "NITE" will be displayed when a command is sent from a remote location. You can use the arrow keys (...) to override the temperature settings, or press the Hold key to prevent any future remote changes. Follow the procedure shown in Programming Mode, to change the programmed DAYand NITEsettings. .. PROGRAMMABLE ENERGY SAVER MODE (PESM) Your thermostat can be configured to allow a remote system to override it. The thermostat sends the temperature to the remote system. The remote system will use the temperature to determine whether or not to override the thermostat based on its own temperature settings. "REMOTE" will be displayed when the remote system has control of the thermostat. You cannot use the arrow keys (...) or any other key on the thermostat to override the remote system. To resume normal operation of your thermostat, you must turn the energy saver feature off at the remote system. 10 SYSTEM MODE Your thermostat can be connected to an automation system or personal computer. With network software, the remote system can send commands to the thermostat to change mode, cool setting, heat setting, status of fan and hold, and other items. "REMOTE" will be displayed when a command is sent from the automation system or personal computer. You can use the arrow keys (...) on the thermostat to change the temperature settings. When the temperature settings are changed at the thermostat, "REMOTE" will no longer be displayed. Press the Hold key to prevent thermostat programs or the remote system from changing temperature settings. "HOLD" will be displayed at the thermostat. • AUTOMATIC TIME UPDATE The thermostat time will automatically be updated by the connected automation system. POWER OUTAGES The thermostat will restart the heating/cooling system 3 to 8 minutes after the electricity comes back on. All settings and programs are stored permanently, and will not be affected by a power outage. CLOCK The thermostat clock is maintained for approximately 25 minutes during an electrical outage. 11 TIME SCHEDULES The table below shows the time schedules that are currently set into your thermostat. There is a blank table at the bottom that can be used to plan changes to the current schedule. WEEKDAYS SATURDAYS SUNDAYS MORN 6:00 AM 8:00 AM 8:00 AM COOL 78 78 78 HEAT 70 70 70 DAY 8:00 AM COOL 85 85 85 HEAT 62 62 62 EVE 6:00 PM COOL ...

Herunterladen

Geben Sie zwei Ziffern: