Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Important Safeguards and Precautions
READ AND RETAIN ALL SAFETY AND
OUTDOOR ANTENNA INSTALLATION
OPERATING INSTRUCTIONS. HEED ALL
1 SAFE ANTENNA AND CABLE CONNECTION
WARNINGS IN THE MANUAL AND ON UNIT
An outside antenna or cable system must be properly
INSTALLATION
grounded to provide some protection
against built up static charges
ANTENNA
LEAD IN
WIRE
1 POWER SOURCE CAUTION
and voltage. Section 810
GROUND
CLAMP
Operate only from power source indicated on unit
of the National Electrical
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
or in this manual. If uncertain, have your Electric
Code, ANSI/NFPA 70 (in
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
EQUIPMENT
(NEC SECTION 810-21)
Utility Service Company or Video Products Dealer
Canada, part 1 of the
GROUND CLAMPS
verify your home power source.
Canadian Electrical Code)
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
2 POWER CORD PLUG
provides information
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
regarding proper grounding of the mast and supporting
For safety, this unit has a polarized type plug (one
structure, grounding of the lead-in wire to an antenna
wide blade), or a three-wire grounding type plug.
discharge unit, size of grounding conductors, location of
Always hold the plug firmly and make sure your
antenna discharge unit, connection to grounding
hands are dry when plugging in or unplugging the
electrodes, and requirements for the grounding electrode.
AC power cord. Regularly remove dust, dirt, etc.
2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE
on the plug.
POLARIZED PLUG CAUTION:
POWER LINES OR CIRCUITS
Locate an outside antenna system wel away from power
The plug fits into outlet one way. If it cannot be ful y
lines and electric light or power circuits so it wil never
inserted, try reversing it. If it stil wil not fit, have an
touch these power sources should it ever fal . When
electrician instal the proper wal outlet. Do not
instal ing antenna, absolutely never touch power lines,
tamper with the plug.
circuits or other power sources as this could be fatal.
GROUNDING PLUG CAUTION:
The plug requires a three-hole grounding outlet.
USING THE UNIT
If necessary, have an electrician instal the proper
Before unit is brought out of storage or moved to a new location,
outlet. Do not tamper with the plug.
refer again to the INSTALLATION section of these safeguards.
3 POWER CORD
1 KEEP UNIT WELL AWAY FROM WATER OR
To avoid unit malfunction, and to protect against
MOISTURE, such as vases, sinks, tubs, etc.
electrical shock, fire or personal injury:
2 IF EXPOSED TO RAIN, MOISTURE, OR
- Keep power cord away from heating appliances
STRONG IMPACT, unplug unit and have it inspected
and walking traffic. Do not rest heavy objects on,
or rol such objects over the power cord.
by a qualified service technician before use.
- Do not tamper with the cord in any way.
3 ELECTRICAL STORMS
- An extension cord should have the same type
During a lightning storm, or before leaving unit unused for
plug (polarized or grounding) and must be
extended periods of time, disconnect al equipment from
securely connected.
the power source as wel as the antenna and cable system.
- Overloaded wal outlets or extension cords is a
4 WHEN UNIT IS PLUGGED IN
fire hazard.
• DO NOT OPERATE IF:
- Frayed cords, damaged plugs, and damaged or
- liquid has spil ed into unit.
cracked wire insulation are hazardous and should
- unit was dropped or otherwise damaged.
be replaced by a qualified electrician.
- unit emits smoke, malodors, or noises.
4 DO NOT BLOCK VENTILATION HOLES
Immediately unplug unit, and have it inspected by a
Ventilation openings in the cabinet release heat
service technician to avoid potential fire and shock hazards.
generated during operation. If blocked, heat
• Never drop or push any object through openings in unit.
build-up may result in a fire hazard or heat
Touching internal parts may cause electric shock or fire hazard.
damage to cassettes or discs.
Do not put any foreign object on the tray.
For your protection:
• Keep magnetic objects, such as speakers, away from
a. Never cover ventilation slots while unit is ON,
unit to avoid electrical interference.
or operate unit while placed on a bed, sofa,
5 USING ACCESSORIES
rug, or other soft surface.
Use only accessories recommended by the manufacturer
b. Avoid built-in instal ation, such as a book case
to avoid risk of fire, shock, or other hazards.
or rack, unless properly ventilated.
6 CLEANING UNIT
5 AVOID EXTREMELY HOT LOCATIONS OR
Unplug unit. Use a clean, dry, chemical y untreated cloth to
SUDDEN TEMPERATURE CHANGES
gently remove dust or debris. DO NOT USE cleaning fluids,
aerosols, or forced air that could over-spray, or seep into unit and
Do not place unit over or near a heater or radiator,
cause electrical shock. Any substance, such as wax, adhesive
in direct sunlight, inside closed vehicles,
tape, etc. may mar the cabinet surface. Exposure to greasy,
in high temperature [over 95˚ F (35˚ C)], or in over
humid, or dusty areas may adversely affect internal parts.
75% humidity. If unit is suddenly moved from a
cold place to a warm one, moisture may
SERVICE
condense in unit and on the tape causing
damage. Never subject unit to vibration, impact,
1 DO NOT SERVICE PRODUCT YOURSELF
or place it so that the surface is tilted as internal
If, after careful y fol owing detailed operating instructions, the
parts may be seriously damaged.
unit does not operate properly, do not attempt to open or
6 TO AVOID PERSONAL INJURY
remove covers, or make any adjustments not described in the
manual. Unplug unit and contact a qualified service technician.
• Never place unit on support or stand that is not
2 REPLACEMENT OF PARTS
firm, level, and adequately strong.
The unit could fal causing serious
Make sure the service technician uses only parts specified
injury to a child or adult and
by the manufacturer, or have equal safety characteristics
damage to the unit.
as original parts. The use of unauthorized substitutes may
• Move any appliance and cart
result in fire, electric shock, or other hazards.
combination with care.
3 SAFETY CHECK AFTER SERVICING
Quick stops, excessive force, and
After unit is serviced or repaired, request that a thorough safety
2 uneven surfaces may cause objects to overturn.
check be done as described in the manufacturer’s service
• Careful y fol ow al operating instructions.
literature to insure video unit is in safe operating condition.
...