Stimmen - 1, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
When you’re done, close the window. Presenting from a Memory Card or Digital Camera Transferring Your Scenario to a Memory Card Once your scenario is saved, you can transfer it to a memory card. You can use any of the following standard Type II cards. Most require a PC card adapter to allow insertion into the projector (check with your computer dealer for availability). ¦ CompactFlash™ ¦ Memory Stick™ ¦ SmartMedia™ ¦ Microdrive™ ¦ ATA flash (does not require a PC card adapter) Before you start, make sure you are set up to access the card in your computer’s PCMCIA slot or card reader. Be sure to use the transfer process described below to ensure that the scenario plays properly: 1. Insert the memory card in your computer’s PCMCIA slot. 2. From the Scenario Option(s) menu, choose Send Scenario. You see a drive selection window: Select your memory card drive 3. Choose the drive where your card is located, then click OK. 4. Click OK again to confirm. Your scenario is transferred to the card. Once the scenario is transferred, you see this message about your scenario’s autorun setting: note You have to save the scenario on your computer’s hard drive before transferring it. Don’t use Windows to copy the scenario to your memory card, or it may not play properly. You must insert the memory card in your computer’s PCMCIA slot before you select Send Scenario from the Scenario Option(s) menu. If you don’t, you won’t be able to see the card’s drive in the drive selection window. If this happens, close and restart EMP SlideMaker. Make sure your card is inserted before you select Send Scenario. Presenting from a Memory Card or Digital Camera 111 The autorun setting means that the scenario will start playing whenever the projector is turned on (with the memory card in the projector). 5. Do one of the following: ¦ If you don’t want the scenario to run automatically, click Cancel. Skip to step 9 to remove the card and insert it in the projector. ¦ If you want it to run automatically, click OK and continue with the following instructions. You see the Edit Autorun window: Scenario set to run automatically Scenarios on the card note 6. To set a scenario to run automatically, select it from the list on the If more than one scenario is left side of the screen and use the arrow button to move it to set to run automatically, they will play in the order the list on the right. listed on this screen. 7. Click the Revive box if you want your scenario to repeat continuously. Clear the checkbox if you want it to play only once. 8. When done, click OK. 9. Remove the card from your computer. See your computer’s documentation if you need instructions on removing the card. If you’re using Windows 2000 or Me, you may first need to click an icon to stop or disconnect the card. Presenting from a Memory Card or Digital Camera Inserting the Memory Card in the Projector When done transferring your scenario to the memory card, follow these steps to insert it in the projector: 1. If necessary, insert the card into a PC card adapter. (ATA flash cards don’t require an adapter.) 2. Insert the card (with the adapter) into the projector with the label facing outward, as shown. The projector does not have to be turned off before inserting the card. note If a digital camera is connected to the projector, disconnect it before inserting the memory card. The memory card is not functional when a digital camera is connected. caution Never force the card into the slot; you could damage the projector. Presenting from a Memory Card or Digital Camera 113 Removing the Card note If you are using CardPlayer, highlight the EJECT button and press Enter on the remote control. Then wait for the indicator light to go off before you eject the card. When you’re done using the projector and want to remove the memory card, follow these steps. Make sure a scenario is not playing and the card is not in use (the indicator light above the card slot is off) before removing it. 1. Press the eject button above the card slot. Make sure the indicator light is off Press the eject button The button pops out. 2. Press the button again. The memory card is released, and you can remove it from the slot in the projector. 3. To remove the card from the adapter, pull it out as shown: Presenting from a Memory Card or Digital Camera Presenting Scenarios Before you begin, insert the memory card as described on page 113. Follow these steps to present a scenario that you’ve saved to a memory card: 1. Turn on the projector, if it’s not already on. ¦ If your scenario is set to autorun, it will start as soon as the projector warms up. ¦ If your scenario is not set to autorun, you need to start it manually. Continue with the following steps. 2. Select EasyMP as the source by pressing the EasyMP button on the remote control. You see a screen like the one below. JPEG files are displayed as thumbnails. Other files or folders are displayed as icons. A scenario icon identifies a scenario file. 3. Use the but...
Dieses Handbuch ist für folgende Modelle:Fernseher - 7850p (14.06 mb)