Stimmen - 2, Durchschnittliche Bewertung: 5
(
)
)
|
Anleitung Zusammenfassung
¦ To turn off the picture, press the A/V Mute button. The screen goes dark. ¦ To turn the image back on, press the button again. You can also have an image, such as a company logo, display on the screen whenever you press the A/V Mute button (see page 132). Stopping Action You can use the remote control to stop the action in your video or computer image. ¦ Press the Freeze button to stop the action and keep the current image on the screen. The sound continues. ¦ Press the Freeze button again to restart it. Using the Remote Control Zooming Your Image You can zoom in on a portion of the image using the E-Zoom buttons on the remote control. 1. Press the E-Zoom button on the remote control. You see a crosshair indicating the center of the zoom-in area. 2. Use the pointer button to position the crosshair. 3. Continue pressing the E-Zoom button to enlarge the selected area up to 4. . 4. While the image is enlarged, you can: ¦ Use the pointer button to pan about. ¦ Press the E-Zoom button to zoom out. 5. When done, press the ESC button to return to the original size. Displaying a Picture-in-Picture Video If you’re displaying an image from equipment connected to the DVI, Computer, or BNC port(s), you can open up a smaller picture-in-picture window on the screen. This window can display video from equipment connected to either the Video or S-Video port. Setting Up the P-in-P Image Before starting, make sure the computer or video equipment for your main image is connected to the DVI, Computer, or BNC port(s), and the video equipment for the P-in-P window is connected to the Video or S-Video port. Then select the corresponding video setting: 1. Press the Menu button on the remote control, and enter the Setting menu. 2. Highlight P in P, use the pointer button to select either Composite or S-Video, then press Enter. 3. Press ESC to exit the menu system. note The Picture-in-Picture function does not work for RGB video images. note Select Composite if your P-in-P video equipment is connected to the Video port. Using the Remote Control 39 P in P button P in P button note To temporarily shut off the sound (and picture), press the A/V Mute button. Displaying the P-in-P Image Make sure your main image source is displayed, then follow these steps to display and use the Picture-in-Picture window: 1. Press the P in P button on the remote control. 2. Use the pointer button to reposition the video window; use the E-Zoom buttons to reduce or enlarge it. 3. Once the window is located and sized the way you want it, press the Enter button; your video continues playing on the screen. Video window 4. When you’re finished viewing the Picture-in-Picture, press the PinP or pointer button again. The window disappears. Controlling the Volume To change the volume, press the or side of the Volume button. If necessary, you can adjust the tone using the projector’s menu system. See page 131. Using the Remote Control Highlighting Your Presentation You can display a pointer to call out something on the screen, or draw straight or curved lines to emphasize particular points. There are three preset pointer tools you can choose from, and each one can be customized for a different look. Using the Pointer Tool 1. To activate the pointer tool, press the Effect button on the remote control. A pointer appears on the screen. Pointer If you prefer to use a different style of pointer, continue pressing the Effect button to select the desired style. Three preset options are available, but you can customize the look of each one (see page 42). 2. Use the pointer button on the remote control to position the pointer on the screen. 3. To draw a straight line, place the pointer where you want the line to begin and press Enter. Move the pointer to where you want the line to end, and press Enter again. 4. To draw a curved line, place the pointer at the start of the line, then press and hold the Enter button until it lights. Then use the pointer button to move the pointer and draw on the screen. Press ESC when done. 5. If you want to draw additional lines, repeat steps 3 and 4. 6. When done drawing, press ESC to clear the screen. Using the Remote Control 41 Customizing the Pointer Tools You can customize the shape and size of each of the three pointer tools, select the color and width of the line made with each pointer, and set how fast you can move the pointer across the screen. 1. Press the Menu button on the remote control, highlight the Effect menu, and press Enter. You see this screen: SetSetVideoVideo AudioAudio SettingSetting User's LogoUser s Logo Advanced1Advanced1 Pointer/Line1Pointer/Line1 [Menu]: Exit[Menu]: Exit Pointer SpeedPointer Speed : [ ]: Enter[ ]: Enter[ ]: Select[ ]: Select AboutAbout Reset AllReset All Advanced2Advanced2 EffectEffect Zoom RateZoom Rate : 100%100% Color SetSetPointer/Line2Pointer/Line2 SetSetPointer/Line3Pointer/Line3 Zoom RateZoom Rate : 100%100% Zoom RateZoom Rate : 100%100% L M ExecuteExecute Color Width H ResetReset 2. For e...
Dieses Handbuch ist für folgende Modelle:Fernseher - 7850p (14.06 mb)