Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
No user serviceable parts inside. Refer servicing to qualified service personnel. A This symbol indicates "dangerous voltage" inside the product that presents a risk of electric shock or personal injury. A This symbol indicates important instructions accompanying the product. Caution: To reduce the risk of electric shock, match wide blade of plug to wide slot, fully insert. Power Consumption: 120V ~ 60 Hz AC 135 Watts (Model MG27006) If fixed (non-moving) images are left on the screen for long periods, they may be permanently imprinted on the screen. Such images include network logos, phone numbers, and video games. This damage is not covered by your warranty. Extended viewing of channels displaying these images should be avoided. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Table of Contents Table of Contents.................................................................1 Setup and Connections.........................................................2 The Menu System.................................................................3 The Point and Select Method..........................................................3 TV Main Menu..................................................................................3 The Picture Quality Menu................................................................3 The Screen Menu..............................................................................4 The Channel Menu...........................................................................4 V-Chip and Parental Controls..........................................................5 Unlocking V-Chip Parental Controls................................................5 The Time Menu.................................................................................6 Channel Marker................................................................................6 The Front Panel................................................................................6 Using the Remote.................................................................7 Tour of the Remote..........................................................................7 Programming the Remote...............................................................8 Using the Remote to Control a Device...........................................9 Troubleshooting..................................................................11 Care and Cleaning..............................................................12 Index..................................................................................13 3 Getting Started Setup and Connections Step 1: Unpack the TV and remote control. ✓ \ Caution: If you choose to use a stand with your TV, take precautions that the stand or other furniture the TV is placed on is properly located and of adequate size and strength to prevent the TV from accidentally being pushed off, pulled off, or tipped over. This could cause damage to the TV and/or personal injury. Step 2: Connect your TV. Connect the cable from your cable system or off-air antenna to the cable in-jack on the back of the TV, as shown. ANTENNA, CABLE, CABLE BOX OR VCR Step 3: Plug in the TV. Plug the end of the power cord into the wall outlet, matching the wide blade of the plug with the wide slot in the outlet. Be sure to insert the plug completely. Step 4: Put batteries in the remote. 1. Remove the battery compartment cover from the back of the remote. 2. Insert batteries as shown, matching the + and - ends of each battery in the compartment. 3. Replace the cover. Step 5: Turn on the TV. • Press the TV button on the remote. Read the next section, The Menu System, which is a brief overview of the basic rules for getting around in the menus using the remote or the TV's front control panel. Step 6: Auto Channel Search. Perform an Auto Channel Search (described in the Channel menu section). 4 The Menu System The Point and Select Method You only need to know one rule to use the on-screen menus and control panels: point and select. 1. Point to a menu item using the MOVE arrows on the remote. 2. Select a menu item by pressing the MENU button. Selecting an item tells the TV's menu system to go ahead and make the change or go to a place you have indicated. You can also select menu items using the number buttons on your remote. TV Main Menu The Main menu is your gateway to controlling the TV. It lets you adjust the TV's picture quality, screen, channel settings, parental controls, and time functions. To select a menu item: 1. Press MENU to bring up the TV's Main menu. 2. Use the Point and Select method to make choices. 3. To exit any menu screen, po...