Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Preset the cable TV channels into memory with Auto Scan function when using a cable TV system. The cable input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV) and Digital cable system (clear QAM) can be found by the scanning of “Cable” with Auto Scan function. See page 33. RF Cable, CATV/ Digital cable or Adapter (not supplied) Note: Users can select either Air or Cable TV cable to be connected to the TV IN jack. To watch both of them, use an adapter to connect both Air and Cable cables to the jack. Connecting to DVD / Set Top Box Connect Video/Audio cables from compatible devices into the back panel of LCD TV. 1) With AV cable: VCD or DVD Player RCA A/V Cable 16 S-Video Cable (not supplied) S-Video Cable (not supplied) 2) With S-Video cable: VCD or DVD Player Audio Cable (not supplied) 3) With YPbPr cable: VCD or DVD Player Audio Cable (not supplied) YPbPr Cable (not supplied) 4) With HDMI cable: VCD or DVD Player (DVD Player should have the HDMI output terminal) HDMI Cable (not supplied) 17 5) With HDMI-DVI cable: Audio Cable (not supplied) HDMI-DVI Cable (not supplied) VCD or DVD Player (DVD Player should have the HDMI output terminal) Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately). Headphone (not supplied) Connecting to a Computer 1) With VGA Cable: Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the audio input terminal (green) of the LCD TV. VGA 15 Pin Cable (not supplied) PC PC Audio In Cable (not supplied) 18 PC PC 2) With HDMI-DVI Cable: Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input of the LCD TV. Also, connect the green end of the Audio In cable from the audio output of your computer to the audio input terminal (red/white) of the LCD TV. Audio In Cable (not supplied) HDMI-DVI Cable (not supplied) Connecting with the power cord Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have been completed, and plug the other end of the power cord into a correctly grounded electrical outlet. AC power socket Power Cord 19 BASIC OPERATION To operate your LCD TV, you may use the TV remote control or bottom panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2. Insert the power plug and the power LED indicator will light orange. Power On/Off To turn the LCD TV on/off : Press the POWER button under the LCD TV, or press the POWER button on your remote control to turn on/off the TV. The power LED indicator lights blue when the LCD TV is on. Select input source To select the required input source: Press the INPUT button on the remote control, Use ^Ў to select the required input source between TV, AV, S-Video, YPbPr, HDMI, and PC. To confirm the selection, press ENTER. Volume Adjusting Press – VOL + to adjust volume. To turn off the volume, press MUTE. If you want to restore volume, press MUTE again, or press – VOL + directly. INFO To display the current information of the LCD TV: Press INFO, and the current state will be displayed on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type, etc., depending on what input source it is in.) * The picture here shows an example of the INFO screen in a DTV source. 20 Electronic Program Guide (EPG) Press the GUIDE button on the remote control and the program information for the channel you are watching will be displayed on the screen. * The picture here shows an example of the GUIDE screen in a DTV source. Channel Select Press number key or ЎCH^ button to select your desired channel. 1. ATV The “-” button has no function in ATV mode. Directly press the number buttons to select channels. 2. DTV Use“-"button to select the sub channel in DTV. Ex: Your desired number is 80-3. Press 8 > press 0 > press“-"> press 3. • Whether in ATV or DTV, after you input the channel numbers, press ENTER button to direct to the channel immediately, or wait for 3 seconds to change automatically. • Return to the previous channel, press LAST button. List Press LIST button and there will be a small window showing program list, you can scroll through the list to select the channel you want directly without using the Ў^ button. 21 Favorite Channels Press FAV button to show Favorite List and select your favorite channels that have already been stored. (You need to preset the favorite channels from the OSD menu to enable this function.) Sleep Time Setting Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice – Off, 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min. Zoom Press ZOOM but...